Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Special Repair Of External Surface With Dismantling Of Worn Out Part And Replacement Of Dilapidated Windows And Painting Of New Administrative Building Bg9 Storied At The Collectorate Compound Of South 24 Parganas At Alipore Kolkata 27 Under Alipore in Kolkata, West Bengal, with an estimated contract value of Rs. 96,90,823. The bid opening date for this tender is 28-05-2025 and the last date for bid submission is 17-06-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender
Civil And Construction
Paints and Enamels
Building Construction
Eprocure
Opening Date28 May 2025
Closing Date17 Jun 2025
Tender Amount₹ 96,90,823
Costs
EMD
₹ 1,93,816Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Special Repair Of External Surface With Dismantling Of Worn Out Part And Replacement Of Dilapidated Windows And Painting Of New Administrative Building Bg9 Storied At The Collectorate Compound Of South 24 Parganas At Alipore Kolkata 27 Under Alipore
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_WBPWD_854708_1Tender No
WBPWDEEIALI/NIET09CSD/25-26Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://http://wbpwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
at roof
Stair
51.04
1389
-
... More
Ordinary cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttring and reinforcement, if any, in ground floor as per relevant IS codes.
(a) Pakur Variety.
25.32
5298
-
... More
at roof
Stair
47.66
6374
-
... More
Providing and inserting nipples with approved fixing compound after drilling holes for grouting as per Technical specifications including subsequent cutting/removal and sealing of the hole as necessary of nipples after completion of grouting with Cement/Epoxy.
338
102
-
... More
Sealing of crack / porous concrete with Epoxy Grout by injection through nipples complete as per clause 2803.1.
169
882
-
... More
Cement concrete (1:1.5:3) with graded stone chips 5.6 mm size with hexagonal square mesh wire netting, I.R.C. fabric mesh or X.P. M. fitted and fixed after tying the existing reinforcement on concrete without distributing the same and with proper scarping and cleaning the reinforcement and disturbed concrete with wire brush etc. after applying a coat of cement including the cost of wire netting I.R.C or X. P. M. & cost of all handling and scaffolding complete as per direction of Engineer-in -charge.
b) 25 mm thick
726.33
522
-
... More
Plaster ( to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering conrners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). [Excluding cost of chipping over concrete surface].
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster.
559.92
171
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 1st. floor)
559.92
175
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 2nd floor)
559.92
179
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 3rd floor)
559.92
183
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 4th floor)
559.92
187
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 5th floor)
559.92
192
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 6th floor)
559.9203
197
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 7th floor)
559.92
202
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 8th floor)
559.92
207
-
... More
(i) with 1:6 cement mortar.
(b) 20 mm. thick plaster. (Add. above ground floor - 9th floor)
559.92
212
-
... More
(b) 20 mm. thick plaster. (Add. above ground floor -10th floor)
263.13
217
-
... More
Labour for taking out steel door and window frame for repairs and re-fixing the same (or replacement by new one) including mending good damages (excluding the cost of repair of damages) and applying a protective coat of paint. Up to one sq.m. area of frame.
1024
128
-
... More
Supplying profiles of requred section made of Aluminium Alloy extrusions conforming to IS:732-1983 and IS:1285-1975; Annodized (with required film thickness and specified colour/natural) matt finished conforming to IS: 1868-1983 for fabrication of composite door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed/ certified make and brand as per direction of Engineer-In- Charge . (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(a) 2 - track sliding window.
(i) Bottom frame.
921.6
218
-
... More
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(a) 2 - track sliding window.
(ii) Top and side Frame.
3379.2
195
-
... More
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(d) Shutter for all track sliding window.
(i) Bottom & top member.
921.6
117
-
... More
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(d) Shutter for all track sliding window.
(ii) Style side member.
2457.6
119
-
... More
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(d) Shutter for all track sliding window.
(iii) intrelock member.
2457.6
148
-
... More
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(g) Fixed glazing.
(i) Top, bottom and side member.
207.8
321
-
... More
(A) In 10-12 Micron thickness Annodizing film.
(I) Natural White.
(g) Fixed glazing.
(ii) Mullion.
136
339
-
... More
Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium section for the following units:-.
(A) Glazed aluminium sliding windows made of extruded and anodized alloy aluminium sectios , fabrications, including cutting to proper shape and size, drilling and alinging of window and shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joinerires along with extruded neoprine or EPDM gasketing in between window frame and masonary work (walls, column, beam, lintels etc.), as well as between glass and shutter frame for fixing glass, & poly sulphate sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate incluides the hire charges of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. But excludes the cost of extuded aluminium sections, glass, neoprene /EPDM gasketing, locking arrangement and rollers.
(i) 2 track sliding window.
1105.92
696
-
... More
(A) Glazed aluminium sliding windows made of extruded and anodized alloy aluminium sectios , fabrications, including cutting to proper shape and size, drilling and alinging of window and shutter frame fitted with in built locking arrangements, sliding rollers and other necessary fittings, fixture, adhesives and joinerires along with extruded neoprine or EPDM gasketing in between window frame and masonary work (walls, column, beam, lintels etc.), as well as between glass and shutter frame for fixing glass, & poly sulphate sealant and in between shutter and window frame where necessary including cutting to requisite size and fixing glass as per drawing, specification and direction of EIC. The rate incluides the hire charges of all tools and plants, including all incidental charges, adhesive, joineries such as screw, cleat angle etc. But excludes the cost of extuded aluminium sections, glass, neoprene /EPDM gasketing, locking arrangement and rollers.
(iv) Fixed glazing.
148.2
768
-
... More
Supplying PVC rollers for sliding windows as per direction of Engineer in charge.
80
14
-
... More
Supplying maruti lock. (100mm.).
50
46
-
... More
Supplying bubble free float glass of approved make and brand. Conforming to IS: 2835-1987.
(i) 4 mm thick clear glass.
1254.12
398
-
... More
Renewing profile of rolling shutter including fitting, fixing complete as per existing size and shape.
13.4
54
-
... More
Renewing spring of rolling shutter as per existing size and shape including fitting, fixing complete.
71
609
-
... More
Labour for taking out rolling shutter (only shutter portion), dismantling by parts for repair (or replacement of damaged parts only),rehanging and re-fitting the same in position after necessary repairs (excluding the cost of supply of new parts).
59.76
283
-
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
1238.98
29
-
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand parpering etc. in cluding using of approved putty etc. on the surface , if necessary.
(b) On steel or other metal surface: (2)With other than hi gloss of approved quality. (iv) Two coats (with any shade except white).
1238.98
72
-
... More
Applying exterior grade Acrylic primer of approved quality and brand on plaster or concrete surface old or new surface to receive decorative textured (mat finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly complete as per manufacturer's specification and as per direction of the EIC. In Ground Floor:.
1491.68
31
-
... More
1st floor
891.88
32
-
... More
2nd floor
891.88
32
-
... More
3rd floor
891.88
33
-
... More
4th floor
891.88
34
-
... More
5th floor
891.88
35
-
... More
6th floor
891.88
35
-
... More
7th floor
891.88
36
-
... More
8th floor
891.88
37
-
... More
9th floor
1275.39
38
-
... More
Protective and decorative Acrylic exterior emulsion paint of approved quality , as per manufacture specification as per direction of EIC to be apply over Acrylic primer as required. the rate included cost of material , labour scaffoldic and all incidential charges but excluding the cost of primer.
In ground floor ( two coat).
( c) Super protective 100% Acrylic emulsion.
1491.68
97
-
... More
1st floor
891.88
97
-
... More
2nd floor
891.88
98
-
... More
3rd floor
891.88
99
-
... More
4th floor
891.88
99
-
... More
5th floor
891.88
100
-
... More
6th floor
891.88
101
-
... More
7th floor
891.88
102
-
... More
8th floor
891.88
103
-
... More
9th floor
1275.39
103
-
... More
Supplying, fitting, fixing marble slab/tiles of 15mm. to 18mm. thic kness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thick base of cement mortar (1:2) laid with white cement slurry @4.4 kg/sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineer-in-charge in Ground Floor. {White cement and Pigment to be supplied by the Agency}
(b) With Chawk Dungri.
(iv) Area of each slab/tile exceeding 1.00 sq.m. (This item to be executed on Specific permission of Superintending Engineer).
51.15
3793
-
... More
Extra cost of labour for prefinished and premoulded Nosing to (A) treads of step, railing, window sill etc. of Marble stone.
47.4
258
-
... More
Extra cost of labour for prefinished and premoulded Nosing to (A) treads of step, railing, window sill etc. of Marble stone.
47.4
258
-
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats
clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
32 mm dia
143.4
236
-
... More
Supplying PVC water storage tank of approved quality with closed top weith lid (Black) - Multilayer.
2000 litre capacity.
3
10434
-
... More
Taking out old damaged tarfelt from the roof, parapet etc.preparing the roof surfaces by removing all spoils, blisters,moss etc. from the working site and disposal of the samebeyond the compound and cleaning the site in all respect asper direction of Engineer-in-Charge. All floor.
956.44
12
-
... More
Taking out Mirzapur or glazed porcelain tiles carefully by chiselling from walls or floor including stacking serviceable material as directed.
263.13
106
-
... More
(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification
293.37
88
-
... More
Cutting chase up to 125 x 150 mm.and subsequent mending of damages.
(a) in brick wall [Cement - 3.6 Kg/Mtr].
93.55
93
-
... More
Preparation of drainage spout on roof for bituminouswaterproofing treatment after required grading and shapingof the under bed with Cement Concrete (1:2:4) or CementMortar (1:4) as directed, Chamfering and moulding theparapet wall to form a bell mouth entry, if required andproviding full course treatment with bituminous felt tofacilitate quick and smooth drainage of watwr into the downpipes complete including cost of all materials and labouraccording to satisfaction of the Engineer - in - Charge.(This item shall be done for reparing works only and shallnot be used when original/renewal of tarfelting work isproposed to be undertaken). All floor.
4
110
-
... More
Application of priming coat for standard bituminouswaterproofing treatment over flat roof with Bitumen primerof approved brand fufilling the provision of I.S. 1346 - 1991& 3384 - 1986 applied @ 0.27 Liters /Sq.m. over clean andprepared roof surface complete as per satisfaction of theEngineer - in - Charge.All Floor -
263.13
24
-
... More
Supplying & laying 3mm thick pre-fabricated plastomericwater proofing membrane conforming to EN 12311-1 &ASTMD 5147, manufactured with atactic poly propylene(APP) modified premium grade asphalt , specially reinforcedwith non-woven polyester core with polyester reinforcement@160 gms per sqm & both faces covered with thermo-fusiblepolyethylene film /MineraL on top face over a coat of primer@ 0.40 lit/sqm of manufacturer's specification onsmooth,clean dry surface prepared wherever required.Lapjoint shall be provided of 75 mm in longitudinal & 100 mm intransverse direction and fused using LPG/ Propane torchemploying extra care ensuring full bondage, completeremoval of entrapped air and sealing edges into grooves inappropriate manner as per direction of Engineer -in-chargeall complete including materials,labour and applicabletaxes. (Payment shall be made on the basis of finishedsurface area.).Membrane Property: Softening Point > 150 deg C, ColdFlexibility < -6 deg C, Tensile Strength, N/cm
: 600(longitudinal), 450 (transverse), Tearing Strength, N:300 (longitudinal), 200 (transverse)
800.44
407
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. and cutting trenches in any soil through masoury concrete structures etc. if necessary and mending good damages including jointing with jointing materials (Spun yarn, valamoid / bitumen/M.seal etc) complete.
(A) UPVC PIPES.
(iii) 160mm Dia.
60
485
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. and cutting trenches in any soil through masoury concrete structures etc. if necessary and mending good damages including jointing with jointing materials (Spun yarn, valamoid / bitumen/M.seal etc) complete.
(B) UPVC fitting:.
(a) plain tee.
(iii) 160mm Dia.
2
507
-
... More
(B) UPVC fitting:.
(d) shoe.
(iii) 160mm Dia.
2
305
-
... More
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150grams per sq. metre (followed by colour coated on both side) steel sheetwork having minimum yield strength of 550 Mpa of trapizoidal profile ofapproved make as per IS: 15965: 2012 and IS: 14246: 2013 (excludingthe supporting frame work) fitted and fixed with 55 mm & 25 mm selftapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc.complete with 150 mm end lap and one corrugation minimum side lap.(Payment to be made on area of finished work). In roof With .5mm thick sheet.
86.31
787
-
... More
GST @ 18%
8131249
-
-
... More
Cess @ 1%
9594874
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%