North Bengal Development Department Tender
... More
The NBDD has issued a formal invitation for competitive bids for the North Bengal Development Department project, for Nie-t- 36/2025-26 (sl. No.- 12) in Jalpaiguri, West Bengal, with an estimated contract value of Rs. 96,40,539. The bid opening date for this tender is 04-06-2025 and the last date for bid submission is 18-06-2025. Interested bidders for North Bengal Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
North Bengal Development Department - NBDD Tender
Civil And Construction
Building Construction
Eprocure
Opening Date4 Jun 2025
Closing Soon18 Jun 2025
Tender Amount₹ 96,40,539
Costs
EMD
₹ 1,92,811Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Nie-t- 36/2025-26 (sl. No.- 12)
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NBDD_856218_12Tender No
NBDD/BS/EE/ NIe-T- 36/2025-26 (Sl. No. 01 to 19)Tender Authority
North Bengal Development Department ViewPurchaser Address
-Website
http://https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of
finished quantity)
326.39
51403
-
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
376.6
383
-
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
376.6
28
-
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.
a) Pakur Variety
37.66
5580
-
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)
(f) 25 mm to 30 mm shuttering without staging in foundation
96.57
244
-
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, ubmission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.
[using concrete mixture]
M 20 Grade
188.62
6361
-
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
a) For works in foundation, basement and upto roof of ground floor/upto 4m.
i) Tor steel/Mild steel Tor Steel Rods/HYSD/Fe 415/Fe 500/Fe 500 D (JSW/JSPL/SHYAM)
29.61
71306
-
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
403.86
432
-
... More
Brick work with 1st class bricks in cement mortar (1:4) (a) In foundation and plinth
i) In Ground Floor
37.65
6107
-
... More
Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure
i) In Ground Floor
35.33
6072
-
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) i) In Ground Floor
15.8
796
-
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking
out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement).
Using grey cement
(iii) 35 mm. thick
178.47
361
-
... More
Supplying, fitting and fixing Marble Slab/tile of 15 to 18 mm thickness in floor, lobby, stair, landing & treads etc. over 20 mm (av.) thck base of Cement mortar (1:2) laid with white cement slurry @ 4.4 kg/Sq.m before placing marble & jointed with white cement slurry @ 2.0 kg/Sq.m with necessary pigments including grinding and Granite polishing as per direction of Engineering -in -Charge in Ground Floor. {White cement and Pigment to be supplied by the Agency] (a) With Makrana plain pink / Adranga Pink / Garbh Gulabi
/ Udaypur pink / Udaypur Green / Black Bhaslana
(ii) Area of each Slab/tile exceeding 0.3 sq.m. but not exceeding 0.6 sq.m.
50.46
2004
-
... More
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone
36
307
-
... More
Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana (i) Area of each Slab/tile upto 0.3 sq.m.
6.95
1873
-
... More
Labour for Chipping of concrete surface before taking up Plastering work.
560.49
25
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface)
External Plaster in GF
(ii) With 1:4 cement mortar
(a) 20 mm thick plaster
285.31
212
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface)
External Plaster in GF
(ii) With 1:4 cement mortar (b) 15 mm. thick plaster
235.63
183
-
... More
(c) 10 mm. thick plaster
560.49
148
-
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
50.62
38
-
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based
interior grade acrylic primer (as per manufacturer's specification)
including cleaning and smoothning of surface.
Two CoatsIn Ground Floor:
(b) Two Coats
796.12
83
-
... More
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the
EIC.
In Ground Floor:
(a) One Coat
297.65
3742
-
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
a) Normal Acrylic Emulsion
297.65
79
-
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
i) Grill weighing above 22 Kg./sq.mtr and above (I) For hanging and locking arrangements including supply of materials and labour complete.
2.08
13468
-
... More
(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
421.2
113
-
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
(b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars.
26.33
2620
-
... More
(vii) Aluminium peg stay 300 mm long including fitting and fixing.
54
70
-
... More
(v) Two point nose aluminium handle including fitting and fixing.
54
70
-
... More
(a) Fixed type steel windows as per IS sizes with horizontal glazing bars.
(i) Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm.
9.36
1961
-
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)
(ii) 4 mm thick
35.69
638
-
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
42.62
34
-
... More
(A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(b) On steel or other metal surface :
With super gloss (hi-gloss) -
(ii) Two coats (white in shade)
42.62
91
-
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.
Weight of Strainless Steel railing per metre 6.5 Kg (approx)
7.5
10817
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
(iii) 160 mm. Dia.
42
578
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
c) Bend 87.5 degree
(iii) 160 mm. Dia
10
481
-
... More
d) Shoe
(iii) 160 mm. Dia.
10
363
-
... More
b) Plain Y
(iii) 160 mm. Dia.
10
809
-
... More
B) UPVC Fittings:
a) Plain Tee
(iii) 160 mm. Dia.
10
604
-
... More
Direction and Place Identification Signs with size more than 0.9 sqm size Board. Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing and Clause 801 of Specifications for Road & Bridge Works of MoRT&H (5th Revision)..
1.08
11403
-
... More
Plinth protection Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm.
13.16
14214
-
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
40.71
383
-
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
40.71
28
-
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.
a) Pakur Variety
4.64
5580
-
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)
(f) 25 mm to 30 mm shuttering without staging in foundation
15.44
244
-
... More
Brick work with 1st class bricks in cement mortar (1:6) (a) In foundation and plinth
6.32
5807
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). ( Excluding cost of chipping over concrete surface)
External Plaster in GF (b) 15 mm. thick plaster
25.27
183
-
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
25.27
38
-
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of
finished quantity)
8.84
51403
-
... More
Supplying & laying as per IRC-SP:063-2004 paver unit of any shade of approved quality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary underlay complete in all respect with all labour and material. [Border concrete if necessary to be paid separately].
Note: Sub-grade CBR should not be less than 5.
a) 25 mm thick Tiles as per IS: 1237-2012 for footpath,ramp,staircase of public building(over 25 mm thick (Avg) Cement mortar (1:3) & Cement Slurry @ 4.4 kg/Sq.m at
back side of Block. Cement for Mortar & Slurry to be supplied by Department).
(ii) Coloured Decorative
33.69
825
-
... More
FIRST FLOOR
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, ubmission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.
[using concrete mixture]
M 20 Grade
50.92
6474
-
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
a) For works in foundation, basement and upto roof of ground floor/upto 4m.
i) Tor steel/Mild steel Tor Steel Rods/HYSD/Fe 415/Fe 500/Fe 500 D (JSW/JSPL/SHYAM)
7
71819
-
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
420.37
454
-
... More
Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure
i) In 1st Floor
37.29
6205
-
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) i) In Ground Floor
91.23
810
-
... More
Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contrr]e) I
(I) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment
(B) Light Colour
142.83
1520
-
... More
Supplying and laying true to line and level Anti-Skid, Full Body, Homogeneous & Granular finish Vitrified Tiles conforming to IS:15622-2006 & IS 4457-2007 and testing shall be made in accordance with IS:13630 [Non- modular sizes for tiles with Skid resistance > 0.5, Mohr's hardness > 5.0, Staining resistance: Class-1, Water Absorption: E < 0.5%], MOR > 35 N/sq.mm in Internal area of building e.g. Toilet Block, Passage, Corridor, Accessible Open Terrace etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg./Sqm or using Polymerised Adhesive (6 mm thick layer applied directly over finished artificial stone floor/ Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per Sqm below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles/ epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor).
(a) In 1st Floor : Sizes-300 mm x300mm x10 mm with breaking strength > 1200 N
8.79
1094
-
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc.
B) Wall With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thickcement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m.(a) Area of each tile upto 0.09 Sq.m
(ii) Other than Coloured decorative including white. wall
53.76
844
-
... More
Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana (i) Area of each Slab/tile upto 0.3 sq.m.
30.93
2018
-
... More
Extra cost of labour for prefinished and premoulded Nosing to treads of steps, railing, window sill etc. of Marble Stone
48
307
-
... More
Supplying, fitting, fixing marble slab/tiles, 15 mm. to 18 mm. thick in dado / wall in 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones properly by brass / copper hooks applying white cement slurry @ 4.4 kg/ sq.m at the back side of marble & pointing in cement mortar (1:2) (1 cement, 2 marble dust) with admixture of pigment matching the stone shades including polishing all complete as per direction of the Engineer-in-charge including cost of materials, labours, scaffolding, staging, curing complete. [White cement, Pigment to be supplied by the Agency]
(a) With Makrana plain pink / Adranga Pink / Garbh Gulabi / Udaypur Pink / Udaypur green / Black Bhalsana (i) Area of each Slab/tile upto 0.3 sq.m.
13.85
1887
-
... More
Labour for Chipping of concrete surface before taking up Plastering work.
421.14
25
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface)
External Plaster in GF
(ii) With 1:4 cement mortar
(a) 20 mm thick plaster
254.1
216
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface)
External Plaster in GF
(ii) With 1:4 cement mortar (b) 15 mm. thick plaster
380.72
188
-
... More
(c) 10 mm. thick plaster
421.14
153
-
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
7.67
38
-
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based
interior grade acrylic primer (as per manufacturer's specification)
including cleaning and smoothning of surface.
Two Coats In 1st Floor:
(b) Two Coats
801.86
83
-
... More
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the
EIC.
In 1st Floor:
(a) One Coat
262.36
3826
-
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In 1st Floor: (Two Coat)
a) Normal Acrylic Emulsion
262.36
80
-
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). c) Sal : local
0.2
87184
-
... More
Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor.
(a) 35 mm thick shutters (single leaf)
6.27
3185
-
... More
Supplying, Fitting & Fixing 30 mm thick thick both side prelaminated Double Leaf Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm
wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S.
frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In 1st floor.
19.8
3251
-
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles & rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge.
9.45
2332
-
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.Add Extra 30% for Oxidised Fittings)
viii) 100mm. X 75mm. X 3.50mm
16
102
-
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With continuous plate base (hexagonal/round rod)
With round base:
vi) 150 mm grip x 10 mm dia rod
8
115
-
... More
Supplying, fitting and fixing M.S. clamp for door and window frame made of flat bent bar, end bifurcated, with necessary screws etc. by cement concrete (1:2:4) as per direction. Cost of concrete will be paid separatively).
(c) 40mm X 6mm, 125mm Length
30
23
-
... More
Anodise aluminium barred/tower/socket bolt (full covered) of approved quality manufactured from extruded section conforming to I.S.204/74 fitted and Fixed with cadmium plated screws:
10
179
-
... More
Anodised aluminium Aldrop / Sliding bolts of approved quality manufacturedfrom extruded section conforming to I.S. specification (I.S. 2681/66) fitted andfixed complete.
iii) 300mm x 16mm dia. bolt.
10
275
-
... More
ii) Door stopper (Anodised aluminium)
5
83
-
... More
Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark.Add Extra 30% for Oxidised Fittings)
viii) 100mm. X 75mm. X 3.50mm
25
102
-
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete:
With continuous plate base (hexagonal/round rod)
With round base:
vi) 150 mm grip x 10 mm dia rod
10
115
-
... More
(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
22.41
45
-
... More
(A) Painting with best quality synthetic enamel paint of approved make
and brand including smoothening surface by sand papering etc. includingusing of approved putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With super gloss (hi-gloss) -
(iv) Two coats (with any shade except white)
22.41
96
-
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
i) Grill weighing above 22 Kg./sq.mtr and above (I) For hanging and locking arrangements including supply of materials and labour complete.
1.65
13603
-
... More
(viii) M.S. integrated grill as per approved design integrated with steel window or ventilator, joints continuously welded with M.S. flats and bars.
373.68
114
-
... More
Supplying, fitting and fixing windows and ventilators with or without integrated grills conforming to IS 1038-1975 and manufactured from rolled steel sections conforming to IS 7452-1974 with non-friction projecting type, box type hinges, glazing clips, lugs locking bracket, handle plate etc, including hoisting in position, straightening if required, fixing lugs in cement concrete ( 1:2:4) with stone chips 20 mm down cutting holes and mending good damages to match with existing surface complete in all respect excluding glazing.
(b) Openable steel windows as per IS sizes with side hung shutters
and horizotal glazing bars.
23.36
2652
-
... More
(vii) Aluminium peg stay 300 mm long including fitting and fixing.
48
71
-
... More
(v) Two point nose aluminium handle including fitting and fixing.
48
71
-
... More
(a) Fixed type steel windows as per IS sizes with horizontal glazing bars.
(i) Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm.
1.08
1985
-
... More
Supplying best Indian sheet glass panes set in putty and fitted and fixed with nails and putty complete. (In all floors for internal wall & upto 6 m height for external wall)
(ii) 4 mm thick
23.36
638
-
... More
(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
23.36
34
-
... More
(A) Painting with best quality synthetic enamel paint of approved makeand brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(b) On steel or other metal surface :
With super gloss (hi-gloss) -
(ii) Two coats (white in shade)
23.36
91
-
... More
Supplying, fitting and fixing Stainless Steel railing consist of 38mm dia and 900mm height vertical balustrade at every two alternative steps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304 containing 7.5% nickle (Interior Grade) Brushed/Mat finish, complete as per direction of the Engineer-in-charge.
Weight of Strainless Steel railing per metre 6.5 Kg (approx)
9.9
10817
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
(iii) 160 mm. Dia.
36
578
-
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete.
c) Bend 87.5 degree
(iii) 160 mm. Dia
10
481
-
... More
b) Plain Y
(iii) 160 mm. Dia.
10
809
-
... More
B) UPVC Fittings:
a) Plain Tee
(iii) 160 mm. Dia.
10
604
-
... More
Second Floor Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
(i) Pakur Variety
In Second Floor
Screed Concrete
5.73
6434
-
... More
(a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer's specification
143.06
104
-
... More
(Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforce with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo-fusible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.)
Membrane Property: Softening Point > 150 deg C, Cold
Flexibility < -6 deg C, Tensile Strength, N/cm : 600
(longitudinal), 450 (transverse), Tearing Strength, N:
300 (longitudinal), 200 (transverse)
143.06
485
-
... More
Controlled Cement concrete with well graded stone chips (20 mm graded nominal size) excluding shuttering and reinforcement with complete design of concrete as per IS : 456 and relevant special publications, ubmission of job mix formula after preliminary mix design after testing of concrete cubes as per direction of Engineer-in charge. Consumption of cement will not be less than 300 Kg of cement with Super plasticiser per cubic meter of controlled concrete but actual consumption will be determined on the basis of preliminary test and job mix foumula. In ground floor and foundation.
[using concrete mixture]
M 20 Grade
3.46
6587
-
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction.
a) For works in foundation, basement and upto roof of ground floor/upto 4m.
i) Tor steel/Mild steel Tor Steel Rods/HYSD/Fe 415/Fe 500/Fe 500 D (JSW/JSPL/SHYAM)
0.48
72331
-
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor)
(c) Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
50.09
475
-
... More
Brick work with 1st class bricks in cement mortar (1:6) (b) In superstructure
i) In Ground Floor
12.62
6337
-
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) i) In Ground Floor
46.85
825
-
... More
Labour for Chipping of concrete surface before taking up Plastering work.
30.6
25
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface)
External Plaster in 2nd FL
(ii) With 1:4 cement mortar
(a) 20 mm thick plaster
89.11
221
-
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (ground floor). (Excluding cost of chipping over concrete surface)
External Plaster in 2nd FL
(ii) With 1:4 cement mortar (b) 15 mm. thick plaster
116.48
193
-
... More
(c) 10 mm. thick plaster
30.6
157
-
... More
Acrylic Distemper to interior wall, ceiling with a coat of solvent based
interior grade acrylic primer (as per manufacturer's specification)
including cleaning and smoothning of surface.
Two CoatsIn Ground Floor:
(b) Two Coats
100.56
83
-
... More
Applying Exterior grade Acrylic primer of approved quality and brand
on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the
EIC.
In Ground Floor:
(a) One Coat
135.63
3911
-
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer.
In Ground floor (Two Coat)
a) Normal Acrylic Emulsion
135.63
81
-
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor.
i) Grill weighing above 22 Kg./sq.mtr and above (I) For hanging and locking arrangements including supply of materials and labour complete.
4.07
13737
-
... More
Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150 grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make(excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).
(i) In Roof:-
a) With 0.5 mm thick sheet
32.73
1067
-
... More
Galvanised iron sheet eaves gutter fitted and fixed with necessary 50 mm X 6 mm M.S flat bar clamps bent to design,bolts, nuts, washers etc. complete. Eaves gutter made of 0.63 mm. sheets.(300mm End lapping)
(b) 300 mm. wide gutter
4
479
-
... More
Sanitary & Plumbing Supplying, fitting and fixing PVC pipes of approved make of Schedule 80
(medium duty) conforming to ASTMD - 1785 and threaded to match with
GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,
reducing socket, reducing tee, short piece etc. fitted with holder bats
clamps, including cutting pipes, making threads,fitting, fixing etc.
complete in all respect including cost of all necessary fittings as
required,jointing materials and two coats of painting with approved paint
in any position above ground. (Payment will be made on the centre line
measurements of total pipe line including all specials. No separate
payment will be made for accesories, specials. Payment for painting will
be made seperately
(A) For Exposed Work
25 mm dia. Medium quality
20
210
-
... More
40 mm dia. Medium quality
15
348
-
... More
(B) For Concealed Work
15 mm dia. medium quality
12
163
-
... More
25 mm dia. medium quality
9
244
-
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
(v) 40mm dia
1
1961
-
... More
(vii) 25 mm dia
4
1086
-
... More
Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand).
4
642
-
... More
(ii) Chromium plated Bib Cock long body with wall flange with aerator
(Equivalent to Code No. 512 & Model - Tropical / Sumthing Special of
ESSCO or similar brand)
2
785
-
... More
(d)(i) Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand).
7
971
-
... More
a) (i) CP Pillar Cock - 15 mm. (Equivalent to Code No. 507 & Model -
Tropical / Sumthing Special of ESSCO or similar brand).
3
661
-
... More
Supplying, fitting and fixing Shallow water closet Indian pattern (I.P.W.C.) of approved make in white vitreous chinaware in position (excluding cost of concrete for fixing).
(i) 580 mm long
4
1159
-
... More
Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe,with PVC coupling at one end fitted with necessary clamps.
v) 900 mm long
4
175
-
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including twocoats of painting to bracket etc.
4
1209
-
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(ii) 550 mm X 400 mm size
3
2631
-
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white
flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.
(iii) 600 mm long
4
127
-
... More
(i) 300 mm long
3
67
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(A) (i) Single Socketed 3 Meter Length
(b) 110 mm
15
348
-
... More
(a) 75 mm
21
233
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992
(ii) Plain Tee
(a) 75 mm
3
54
-
... More
(b) 110 mm
4
101
-
... More
x) Bend 87.5º
(a) 75 mm
6
72
-
... More
(b) 110 mm
8
143
-
... More
viii) Double Y with Door
(a) 75 mm
2
256
-
... More
(b) 110 mm
2
411
-
... More
xxxi) Plain Floor Trap with Top tile & Strainer
75 mm
3
171
-
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (B) Fittings (xii) ) Door Bend (LH) & (RH) (b) 110 mm
2
338
-
... More
Supplying, fitting & fixing Aluminium domical grating.
(ii) 125 mm
7
66
-
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
3
730
-
... More
Supplying, fitting and fixing towel rail with two brackets.
(b) Aluminium
(i) 25 mm dia. and 450 mm long
3
169
-
... More
Supplying, fitting and fixing soap holder.
(b) Fibre glass
3
69
-
... More
Supplying, fitting and fixing porcelain soap tray of approved make.
(i) Recessed soap tray of size 150 mm X 150 mm
3
402
-
... More
Supplying P.V.C. water storage tank of approved quality with closed top
with lid (Black) - Multilayer
(d) 2000 litre capacity
1
12435
-
... More
Labour for hoisting plastic water storage tank.
(ii) Above 1500 litre upto 5000 litre capacity.
(a) Upto 2nd story from G.L.
1
269
-
... More
(a) Upto 2nd story from 1st floor
1
171
-
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
3
22
-
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,PartI.Payment will be made separetly on the basis of actual height based on relevant I.S.Code.
iii) For 30 users
A) With Pakur variety. (SAIL/TATA/RINL)
1
70734
-
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and
1.00m inside dia
(SAIL/TATA/RINL)
2
18472
-
... More
Constructing Inspection pit of inside measurement 600mm X 600mm X upto 600mm (depth) with 250 mm thick 1st. class brick work in cement mortar (1:4) on all sides, bottom of the pit consisting of 100 mm thick cement concrete (1:3:6) with stone chips over a layer of jhama brick flat soling, 15 mm thick (1:4) cement plaster to inside walls and out-side walls upto G.L. and 20 mm.thick (1:4) plaster to bottom of the pit, providing necessary invert with cement concrete (1 :3:6) with stone chips as per direction, neat cement finishing to entire internal surfaces, top of the pit covered with 100 mm thick R.C.C. slab (1:1.5:3) with stone chips and necessary reinforcements
upto 1% and shuttering including 6 mm thick cement plaster (1:4) in all external surfaces of the slab and one 560 mm dia. R.C.C. manhole cover of approved make supplied, fitted and fixed in the slab with necessary fittings, necessary earthwork in excavation in all sorts of soil, filling sides of the pit with earth and removing spoils after work complete in all respect with all costs of labour and materials.
i) With Pakur variety (Other than SAIL/TATA/RINL)
2
7940
-
... More
Electrical
Supplying and fixing 240V, 63A Sheet steel Main Switches on angle iron frame on wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment
(MAKE- as per E.I.C)
1
4464
-
... More
Supplying and fixing of double door 2+12 way IP-43 SPN MCB distribution board with 1 No. 40 A SP MCB as incomer and 13 nos. 6-32 A SP MCB as outgoing complete with Din Rail, Earth, Neutral & Phase Bars etc. to be partially recessed in wall with earthing attachment. (Make-as per E.I.C)
2
5817
-
... More
Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire forECC, incl. necy. fittings etc. to light/fan/call bell point with Modular type switch (Brand approved by EIC) fixed onModular GI / PVC switch board with top cover plate on wallincl. mending good damages to original finish. [PVC casingcapping and Switch board both on surface] Average run 8 mtr
75
1099
-
... More
Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, incl. necy. fittings etc. with S & F 6A 5 pin Modular type plug socket and switch (Brand approved by EIC) fixed on 4 Module GI / PVC switch board with 3/4 Module top cover plate on wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface]
On Board
2
270
-
... More
Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI/ PVC Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity
wire etc.
16
471
-
... More
Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI/ PVC Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy.connections with PVC Cu wire and earth continuity wire etc.
16
570
-
... More
Fixing only Single/twinfluorescent light fitting suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm) flexible copper wire of 1.10 mt. length.
25
267
-
... More
Fixing only 300 mm dia exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection.
12
411
-
... More
Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm
dia x 62 mm long) For Al 30 cm Exhaust fan (12")
12
241
-
... More
Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts &
washers (6 mm dia x 62 mm long) or as reqd. incl. S&F 24/0.20
PVC insulated flexible copper wire 0.5 mt. length
10
115
-
... More
Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire
10
82
-
... More
Supply of 240V LED tube batten light with high efficacy for modern application made of extruded Alluminium housing and high quality defuser for better and uniform illumination with all necessary connection and earthing attachment . (MAKE- as per E.I.C)
25
897
-
... More
Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling with 10 W LED lamp. (as per E.I.C)
6
218
-
... More
Supply of 250 V 300 mm. sweep, 900 rpm industrial type heavy duty (ISI)high speed exhaust fan. (MAKE- as per E.I.C)
12
4879
-
... More
Supply of 250 V 400mm sweep Wall fan complete fittings on wall , inchuding Drilling, mending good damagesin all respect with an necessary connection.(MAKE- as per E.I.C)
10
3644
-
... More
S & F 250 V 1200 mm sweep AC ceiling fan (ISI) complete with blades, canopy, down rod etc. having fixed with 2 nos ball bearing fixing the same, painting of down rod, connection by supplying 3×1.5 sq. mm stranded copper wire. (MAKE- as per E.I.C)
20
4439
-
... More
Supplying & Fixing of Box type fan clamp of 150mm dia & 80mmdepth made of 16 SWG CRCA sheet with one end duly sealed by cover, properly welded, incl. S&F 12mm dia 600mm long MS rod duly bent by heat treatment at the centre position of rod to grip fan bobbin properly, incl. binding the rod and fan box with reinforcement by 22 SWG steel binding wire, incl. supplying & covering the box with alkathene sheet, placed in order to prevent concrete from entering the box
20
217
-
... More
Supply & Fixing 240V, Modular Socket (2 Module) type fan regulator (Step type) (Brand approved by EIC) on existing Modular GI switch board with top cover plate incl. making necy. connections etc.
20
484
-
... More
Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.
(a) 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm)
60
165
-
... More
b) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
500
127
-
... More
c) 2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm)
500
106
-
... More
i) Earthing with 50 mm dia GI pipe (ISI-M) 3.64 mm thick × 3.04 mtr long and 1 × 4 SWG (Hot dip) wire 4 mtr long) 13 mm dia × 80 mm long GI bolts double washers incl. S & F 15 mm dia GI pipe protection (1 mtr long) to be filled with bitumen party under the ground level and partly above ground level driver to an average depth of 3.65 metre below the ground level & restoring the surface duly rammed.
1
1982
-
... More
S & F earth bus bar of GI (Hot Dip) MS flat of 50 mm × 6 mm on wall is having clearance of 8 mm from wall including providing drilled holes on the bus bar complete with GI bolts, nuts, washers spacing insulators tc. As required.
1
270
-
... More
Extra for providing masonery enclosure on the top of the earth
electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep
(below Ground level) complete with cemented brick work(1:6)
of 25 cm width duly plastered with cement morter (inside) CI
hinged inspection cover of size 36.56 cm x 35.56 cm with
locking arrangement, GI reducer including drilling of 46 nos.
12 mm dia holes on the GI pipe including Extra for treatment of soil by using salt & charcoal or coke for plate electrode
1
1145
-
... More
Supply of 1.1 KV grade PVC/A Al cable : 2 core X 10 sq mm (Make -as per E.I.C)
250
336
-
... More
Laying of cable upto 2 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting
250
71
-
... More
S & F compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture -proof entry of XLPE/PVC armoured cables as bellow. (2 core X 10 sq mm)
6
143
-
... More
Finishing the end of following XLPE/PVC armoured cable by crimping method incl.S & F solderless socket (Dowels make,) tapes,anticorrosive paste & joining materials. (2 core X 10 sq mm)
6
42
-
... More
Supply & laying of 3 X 2.50 sq. mm PVC insulated copper conductor FR wire from loop box to fittings in 15 mm dia polythene pipe including connection as required.
50
97
-
... More
Supplying and fixing 4 WAY MCB SS enclosure with IP-20/30 protection, powder coated including 2 NOS 6-32A two pole MCB, concealed in wall after cutting the wall & mending good the damages to original finish incl. painting, connection & provision for earthing attachment (Havells/Legrand/L&T)
1
1761
-
... More
Fixing outdoor type fluorescent/SV/MV light fitting on pole
including S&F 40 mm dia x 1.68 mts. long GI Pipe (ISI-Medium) bracket with 40 mmx10 mm thick, MS clamp etc. and providing wiring with 2x1/1.40 PVC insulated and sheathed wire (single
core) from loop box at the base of pole to light fiting through pole & bracket (without control switch) including making connections & painting
6
1670
-
... More
Supplying & Fixing GI waterproof type looping cable box size
200x150x100 mm deep having 4 mm thick comprising of one 250V 15 A kit-kat fuse unit, one NL on porcelain insulator, one compression type brass cable gland for upto 2- core 16 sqmm PVC/A cable and having lined with rubber gasketted GI top cover with brass machine screws etc., earthing terminal with lug, on steel tubular pole near base, including S&F 40x6 mm thick, MS clamps with bolts, nuts etc. including painting with anticorrosive paint
6
573
-
... More
Supply of LED Street light luminaire with high power LED (Make Crompton/HPL/Havells)
6
12443
-
... More
Sinking of Deep Tube well: Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes, scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the onnection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore. (a) For depth upto 150 metre (i) 80 mm dia. boring etc.
110
234
-
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).
(i) 80 mm dia. (internal)
90
688
-
... More
Supplying PVC strainer of approved make with adapter conforming to
I.S.12818 specifications.
(i)80 mm dia.
12
586
-
... More
Labour for jointing and lowering pipes including strainer within the tube well bore vertically with necessary sockets, special fittings and welding as required including cost of all jointing materials, hire charges of tools and plants, cutting pipes to required sizes, making threads, welding pieces together etc. as necessary as per direction of the Engineer-in-charge.
Upto 100 mm dia. pipe
102
70
-
... More
Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with 'V' notch including hire and labour charges for all tools and plants and scaffolding as required.
1
8983
-
... More
Packing the annular space between the outside of the tube well pipes & strainers and the bore with pea size washed gravel of approved quality having size from 2 mm to 5 mm or the size approved by the Engineer-incharge including cost of all materials labour and equipment complete.
15
2418
-
... More
Labour for making arrangement for showing verticality test including the cost for hire charges of tools and plants, scafolding, labour etc. all complete.
1
1091
-
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
1467
-
... More
Supply, fitting, fixing and lowering the following with fabrication as required:
(a)80 mm dia bottom cap.
1
101
-
... More
(b)80 mm dia Top cap with hole.
1
101
-
... More
(c) Threaded Adopter
( 80 mm Dia).
30
156
-
... More
Supplying & fixing medium gauge 50 mm dia GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required
36
412
-
... More
Supplying, fitting and fixing CPVC (Chlorinated
Polyvinyl Chloride) pipes of approved make conforming
to IS-15778: 2007 . with all necessary accessories,
specials viz. socket, bend, tee, union, cross, elbo, nipple,
longscrew, reducing socket, reducing tee, short piece etc.
fitted with holder bats clamps, including cutting pipes,
fitting, fixing etc. complete in all respect including cost
of all necessary fittings as required,jointing materials in
any position above ground.
(i) CPVC Pipes Class-1, SDR-11 (32 mm Dia)
100
337
-
... More
S & F suitable size of M.S. Flat clamp for holding the column pipe, pump motor in the tube well with necessary nuts, bolts, washer as per direction of EIC.
2
2663
-
... More
S & F 20 mm dia G.I. Pipe (ISI-M) for protection of cable.
50
133
-
... More
Supply and Installation of 1 HP Submersible pump motor set suitable for 80 mm dia deep tube well capable for discharging 2.4 M'/h of Clear water at a total head of 42 mtr having a discharging outlet of 32 mm dia with 4 sqmm 2 core PVC flat copper cable of 50 mtr including connection with DOL starter as per EIC.
1
22241
-
... More
Supply and delivery of direct on line ( DOL) strater panel board conforming to ISl3947 and IEC 947 of suitable HP rating for operation in 230V (+10%) AC, single phase, 50HZ(+5yo) comprising of ammeter, voltmeter, thermal overload relay,2 pole magnetic contactor, under voltage protection, indicating lamp, capacitors, on/off push buttons including 5 way connector, wiring with l/1.5 sq. mm PVC insulated copper wire, powder coated vermin proof box of following capacities:-
(i) I H.P. (Relay Range 6-10 Amp.)
1
5366
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%