North Bengal Development Department Tender
... More
The NBDD has issued a formal invitation for competitive bids for the North Bengal Development Department project, for Repairing Work Of Bituminous Road From Umesh Store Nh-17 To Sabuj Sangha Under Khagrabari Gram Panchayat Within Cooch Behar-ii Block In The District Of Coochbehar (length 525.00 M , Width 3.00m ) in Cooch Behar, West Bengal, with an estimated contract value of Rs. 26,79,556. The bid opening date for this tender is 13-11-2026 and the last date for bid submission is 27-11-2026. Interested bidders for North Bengal Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
North Bengal Development Department - NBDD Tender - WB Tender
Opening Date13 Nov 2026
Closing Date27 Nov 2026
Tender Amount₹ 26,79,556
Costs
EMD
₹ 53,591Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Repairing Work Of Bituminous Road From Umesh Store Nh-17 To Sabuj Sangha Under Khagrabari Gram Panchayat Within Cooch Behar-ii Block In The District Of Coochbehar (length 525.00 M , Width 3.00m )
Contact
Tender Id
2026_NBDD_1049117_5Tender No
NBDD/BS/EE/ NIe-T- 101/2026-27Tender Authority
North Bengal Development Department ViewPurchaser Address
-Website
https://wbtenders.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).ii)for Grading 2 (19 mm nominal size)
82.69
15526
1283923.5
... More
Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg-0.3kg /sqm.
1653.75
30
50654.36
... More
Open - Graded Premix Surfacing Providing, laying and rolling of open-graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using viscosity grade bitumen of approved grade to required line,grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled tandem or other approved type roller 8-10 tonne capacity, finished to required level and grade (Reference to MORT&H's specification clause 510)10.(1) Case-I:Mechanical method using approved grade Bitumen and HMP
of appropriate capacity not less than 75 tonnes/hour .
1653.75
315
521063.55
... More
Seal Coat (Type B) Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511). 12(ii)Case - II : Type B rovidingandlayingofpremixsand
sealcoat withHMPusingapproved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade.
1653.75
115
190346.63
... More
Direction and Place Identification Signs with size more than0.9 sqm size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC :67 made of high intensity grade
sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mildsteel angle iron post 75mmx75mmx6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15grade cement concrete 45cmx 45cmx60cm, 60cm below ground level as per approved drawing (Reference to MORT&H's specification 801).
1.1
23604
25964.67
... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm
thick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5mmis exclusiveof surface applied glass beads as per IRC:35 .The finished surface to be
level,uniformandfreefromstreaks and holes (Reference toMORT&H's specification 803).
105
734
77163.45

