North Bengal Development Department Tender

... More
The NBDD has issued a formal invitation for competitive bids for the North Bengal Development Department project, for Repairing Work Of Bituminous Road From Prafulla Das House To Jiban Das House (near Paver Block Road) Under Latapota Gram Panchayat Within Mathabhanga-ii Block In The District Of Coochbehar (length 840.00 M , Width 3.00m ) in Jalpaiguri, West Bengal, with an estimated contract value of Rs. 47,63,930. The bid opening date for this tender is 06-11-2026 and the last date for bid submission is 20-11-2026. Interested bidders for North Bengal Development Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

North Bengal Development Department - NBDD Tender - WB Tender

Opening Date6 Nov 2026
Closing Soon20 Nov 2026
Tender Amount₹ 47,63,930 
Notes
Download

Costs

Description

Repairing Work Of Bituminous Road From Prafulla Das House To Jiban Das House (near Paver Block Road) Under Latapota Gram Panchayat Within Mathabhanga-ii Block In The District Of Coochbehar (length 840.00 M , Width 3.00m )

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).ii)On Granular surface treated with primer @ 0.25kg-0.30 /sqm.

2646

33

88455.78

... More
Bituminous Macadam Providing and laying bituminous macadam using crushed aggregates of specified grading premixed with bituminous binder, transported to site, laid over a previously prepared surface with paver finisher to the required grade, level and alignment and rolled as per clauses 501.6 and 501.7 to achieve the desired compaction (Reference to MORT&H's specification clause 504).ii)for Grading 2 (19 mm nominal size)

132.3001001

16087

2128396.38

... More
Tack Coat Providing and applying tack coat with Cationic bitumen emulsion (RS1) complyingwith IS:8887using emulsion pressure distributor on the prepared bituminous/granular/cement concrete pavement surface cleaned with mechanical broom and high pressure air jet (Reference to MORT&H's specification clause 503).i)On bituminous surface @ 0.20kg-0.3kg /sqm.

2646

30

80888.22

... More
Open - Graded Premix Surfacing Providing, laying and rolling of open-gradedpremix surfacingof 20mmthicknesscomposedof13.2 mmto 5.6mmaggregates either using viscosity grade bitumen of approved grade to required line,gradeandlevel toserveaswearingcourse on a previously prepared base, includingmixinginasuitable plant, laying and rolling with a smoothwheeled tandemor other approved type roller 8-10 tonne capacity, finishedtorequiredlevel andgrade (ReferencetoMORT&H's specification clause 510) 10.(1) Case-I:Mechanicalmethodusing approvedgradeBitumenandHMP of appropriate capacity not less than 75 tonnes/hour .

2646

325

861881.58

... More
Seal Coat (Type B) Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using. Type A and B seal coats (Reference to MORT&H's specification clause 511). 12(ii)Case - II : Type B providing and laying of premixs and seal coat with HMP using approved crushed stone chipping and viscosity grade paving bitumen of suitable approved grade.

2646

117

310640.4

... More
Supplying fitting and fixing R.C. guard post 1.37m long with C.C. 1:2:4 with graded stone chips of 13.2mm down casting , curing complete including cost of providing 4nos.of 12mm dia. rod of length 1.54m as main reinforcement and 6 nos. of round shaped 8mm dia rods used as binders; the placing of the first binder should be at 75mm below the top finished surface and the other 5 nos of binders should be placed at 245mm c/c ; the guard post is of octagonal section with inscribed circle of dia 24cm at the base tapering to corresponding dimensions of 16cm at the top including two coats of painting with best quality synthetic enamel paint of approved make and grade to form 6 nos. horizontal alternate bands in white/tannery yellow and black to 90 cm length standing up above ground after mendinggood damages if any during striking off shuttering, making hole in ground of 47cm depth and 30cm. minimum dia, fixing the guard posts in the same holes and repacking the earth properly so as to keep the guard posts standing properly erect in correct position true to line and length including carriage of R. C. Guard Post with due care to the site including loading into the truck and unloading at site complete in all respect. With Pakur variety stone chips.

50

831

41594

... More
Retro-Reflectorised Traffic Signs: Providing and fixing of retro reflectorised cautionary,mandatory and informatory sign as per IRC:67madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when sign swith maximum side dimensions do not exceed 600mm, o rwith aluminium sheeting 2.0 mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mildsteel angle iron post75mmx 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801).

2

5538

11077.5

... More
Retro-Reflectorised Traffic Signs: Providing and fixing of retro reflectorised cautionary,mandatory and informatory sign as per IRC:67madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when sign swith maximum side dimensions do not exceed 600mm, o rwith aluminium sheeting 2.0 mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mildsteel angle iron post75mmx 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 4(ii) 60 cm equilateral triangle

2

4081

8162.46

... More
Direction and Place Identification Signs with size more than0.9 sqm size Board. Providing and erecting direction and place identification retro reflectorised sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 2mm thick with area exceeding 0.9 sqm supported on a mildsteel angle iron post 75mmx75mmx6mm, 2 Nos. firmly fixed to the ground by means of properly designed foundation with M15grade cement concrete 45cmx 45cmx60cm, 60cm below ground level as per approved drawing (Reference to MORT&H's specification 801).

2.2

23706

52154.54

... More
Road Distance Indicator Reinforced cement concrete M15 grade kilometre stone of standard design as per IRC:8-1980, fixing in position including painting and printingetc(ReferencetoMORT&H's specification 805). 14(ii)Ordinary kilometer stone (precast)

2

2251

4502.62

... More
Retro-Reflectorised Traffic Signs: . Providing and fixing of retro reflectorised cautionary,mandatory and informatory sign as per IRC:67madeof high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick,when sign swith maximum side dimensions do not exceed 600mm, o rwith aluminium sheeting 2.0 mm thick when signs with maximum side dimensions exceeds 600mm, supported on a mildsteel angle iron post75mmx 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45cmx45cmx60cm,60cm below ground level as per approved drawing (Reference to MORT&H's specification 801). 4(v) 60 cm x 45 cm rectangular

2

5389

10778.98

... More
Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area,thickness of 2.5mmis exclusiveof surface applied glass beads as per IRC:35 .The finished surface to be level,uniformandfreefromstreaks and holes (Reference toMORT&H's specification 803).

168

734

123461.52

... More
Road Delineators :- Supplying and installation of delineators (road way indicators, hazardmarkers,objectmarkers),80 100 cm high above ground level, painted black and white in 15 cm widestrips, fitted with 80x100mm rectangular or 75mmdia circular reflectorised panels at the top,buried or pressed into the ground and conforming to IRC-79 and the drawings (Reference to MORT&H's specification 806).

10

1035

10354.1



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.