New Town Kolkata Development Authority Tender

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety

Brick work with 1st class bricks in cement moriar (1:4) (a) in foundation & plinth

Supplying& laying as per IRC-SP:063-2004 paver unit of any shade of approvedquality as per relevant IS code, laid in pattern as directed in pavement, footpath, driveway (paver block only), etc including necessary under lay complete in all respect with all labour and material. 50mm thick interlocking designer concrete paver block M 30 grade for non-traffic zone, buiding premises, garden, parks, domestic drive as per IS: 15658 2006 (over 20-30 mm medium sand bed on 200 mm thk bound gnaular/granular base course including cost of sand for sand bed but excluding cost of base course & sub grade preparation Coloured Decorative

Supply of UPVC pipe (B type ) & fitting conforming to IS-13592-1992. Single socketed 3 meter length, 160mm

Labour for fitting and fixing U.P.V.C. pipes for above ground work including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer in-charge. (Payment will be made on centre line measurement of the total pipeline including specials Under ground 160mm dia

Supplying, fitting and fixing 10 litre PVC low down cistern conforming to I.S. Specification with P.V.C. Fittings complete, CI brackets including two coats of paint to bucket etc.

Supply fiting and fixing bib cock or stop cock PTMT (Polytetra Bib Cock / Stop Cock (Prayag or equivalent, 15 mm

Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) For exposed work PVC Pipe 25 mm dia

Piming one coat on steel or other metal surface with synthetic oil bound primer of approved quality incuding smoothening| surfaces by sand papering etc.

Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc includ1ng using of approved puty elc. on the surface, if necessary On steel or other metal surface |With super gloss (hi-gloss) l(v) Two coats (with any shade except white)

Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with water in propotion (1 bonding agent 4 water, 6 cement) as per manufacturers specification [ Cement to be supplied by the Department]

Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. in Ground Floor (b) Two Coats (with any shade except white)

Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of EIC to be applied over acrylic primer as required The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. in Ground floor (Two Coat) c) Super Protective 100% Acrylic Emulsion

M.S.or WI. Ornamental grill of approved design joints Continuously welded with M.S, WI. Flats and bars of windows railing etc. fitted and fixed with necessary screws and lugs in ground floor. ii) Grill weighing above 16 Kg./sq.mtr and above

Supplying 1.5 mm thick M.S. Sheet fittedf and fixed on one or both faces of M.S / W.I. Gate etc. With point welding at not more than 150 mm apart complete in all respect as per design including cost of all labour and materials.

Supplying and laying true to line and level vitrifed tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick)in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 291Kg. /sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 175 Kg of cement per sqM below mortar only. joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax Coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials. labour and all other incidental charges complete truUe to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic| adhesive and grout material to be supplied by the contrrje). With application slurry @1.75 ka/ Sa.m, 20 mm sand cement mortar (14) & 2 mm thick cement slurry at back side of tiles, 0.2 ka Sq.m white cement for joint flling with pigment. Deap colour & white

Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer Charge. (Payment will be made on finished length of the work). (B) 15 Micron colour annodizing. h) Louvered window

Movable door shutter

Door Frame (Top & side)

Shutter

Top rail

Bottom rail

Lock rail

Door vertical

Glaxing cleap

Labour charge for fabrication and installation of composite door, window, partitions made from annodized extruded alloy aluminium sections for the following units: Partly glazed partly panelled or fully glazed single leaf alunminium swing door made of extruded and annodized alloy aluminium sections,fabrication including cutting to proper shape and size, drilling and aligning, fitted with heavy duty hydraulic action floor sping placed in the floor with mending damages, witht op pin assembly of approve make and brand, fitted with in built locking arrangement, flushbolt, glazingclips and all other necessary fittings, fixtures, adhesives and joineries, cutting glass of approved make to requisite shape and size fitting with dry set neoprene or EPDM gasketing, cutting to requisite shape and size panel board (prelaminated particle block) fixing them with glazing clips as per drawing, specification and direction of Engineer in charge.

Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987 5 mm thick coloured / tinted/ smoke glass

Providing and Displaying Helianthus different colour with full bloom (3 in one) fresh & healthy in 25 cm Earthen Pot/Plastic Pot well developed as per direction of the officer-in-charge.

Chromium plated Bib Cock (angular shape with wall flange) (Equivalent to code no. 5037 & Model - Florentine or Jaguar or similar brand)

Chromium plated angular Stop Cock with wall flange (Equivalent to Code no. 5053 & Model-Florentine or Jaguar or similar brand)

Repairing, renovation & replacement of existing damaged locking arrangement system for m.s. Rolling shuter at NKDA Market opposite Unitech Gate No.2 Action Area-I New Town, Kolkata with cleaning, oiling, grezing etc. Including all necessary accessories complete, materials, labour, scaffolding & all other charges complete.

Supplying fitting & fixing heavy type chain with pully, gear box, spring, bracket plate, m.s. Angle. Flate etc. Fixing at m.s. Rolling shutter at community centre-i building, Action Area-I, New Town, Kolkata including all necessary accessories complete, rate is inclusive materials, labour, carriage, loading & unloading, sacffolding & all other charges

Repairing, renovation & replacement both side chanel, top box locking box system etc of existing m.s. Rolling shutter at Community Centre-I Building, Action Area - I, New Town, Kolkata with cleaning oiling, grezing etc. Including all necessary acessories complete materials, labour, scaffolding, and all other charges complete.

Supply & Installation of Table size-1200 mm X 600 mmX 750 mm height, made with top ply wood pasing sunmica of approved colour & brand legs with mild steel including priming & painting at Community Centre -I building, Action Area-I, New Town, Kolkata including all necesary accessories complete, materials labour Scaffolding & all charged complete

Repairing & re installtion of Street Signage at various locations of Action Area-I, New Town, Kolkata including cement concrete foundation work firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 X 450X 600 mm 600 mm below ground level, including all necessary accessories complete, rate is inclusive of materials, labour, scaffolding & all other charges complete

Repairing & re installation of Electrical Box at street no. 208 of Action Area -I, New Town, Kolkata including cement concrete foundation work, firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 750X 750 X 600 mm, 600 mm below ground level, including all necessary accessories complete, rate is inclusive materials, labour, scaffolding & all other charges complete

Supply of PVC table sixe 1125 mm X 750 mm X 750 mm height & approved colour and brand at CB Community Market, action Area-I, New Town, Kolkata , rate is inclusive materials, charrige, loading & unloading and all taxes complete

Supplying, fitting & fixing of Flag, various colour & approved make and brand, fixing over the street of Street for People near New Town Plaza at Action Area-I, New Town, Kolkata made with approved quality cloth with striching, size 575 mm X 450 mm , rate is inclusive fabric, labour, carriage, loading & unloading & all taxes complete

Supplying fitting & fixing of Conves Mirror, 900 mm dia, fixing of exing frame work near steel building at Action Area-I, New Town, Kolkata rate is inclusive labour, carriage, loading & unloading & all taes complete

Engagement of Mazdoor for cleaning / sweeping of various NKDA Market, New Town, Kolkata uncluding other works etc all complete & as per direction of EIC

Add G.S.T @ 18 %` from Serial 1 To 33

Add Labour Welfare Cess @ 1% from Serial 1 To 33