Municipal Affairs Department Tender

Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work P- 43, I- 36

Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting, guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (IV)For Constructionof Sub Base by compacting river bed materials.

Supplying and laying in the specified pattern of interlocking concrete block pavement(ICBP) with concrete block (with concrete grade as specified as per table 1 of IS 15658:2006) manufactured in steel mould clamped to a vibrating table by hydraulic pressure ( as petr cl no 6.30 of IRC : SP:63 (2018) FROM BIS LINCENSE manufacture with spacer nib (small protuding profile on the vertical face of a paver block use as a device for keeping minimum joint gap in between the paving blocks as per cl no 3.26 of is : 15658 ) as per table 2 of IS 15658 on the prepare base bcourse of specified CBR as per table 1 of IRC sp 63 (2018) or else as mentioned in design and drawing with a cushion of compacted bedding sand of 25-35 mm thick (grading of the bedding sand as per clause 6.5.2 of IRC SP 63 and filling up the gap in between paver blockls with joint filling sand (the grading of the joint filling sand will be as per clause 6.5.2 of IRC SP 63 ) and completing the edges with cut blocks as per cl no 8.7 of IRC SP 63 (2018) with proper confinement of bedding and joint filling sand compacting ,levelling and filling uo of the edge gap. 60 mm thick. Colour Decorative 12th Corrigenda,Page-4 It-4

G.S.T. @ 18.00%

Labour Welfare CESS @ 1.00 %