Metro Railway Tender
... More
The Metro Railway has issued a formal invitation for competitive bids for Modification Work In Signaling At Kkvs & Kskd Along With Shifting Of The Existing Msdac Of Kkvs To Kskd Including Allied Works In View Of The Rehabilitation Of Kkvs Station On The Newly Built Up Pf/old Pf Of Both Up And Dn Lines" in Kolkata, West Bengal, with an estimated contract value of Rs. 25,25,688. The bid opening date for this tender is 24-10-2026 and the last date for bid submission is 16-11-2026. Interested bidders for Metro Railway tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Metro Railway Tender - WB Tender
Opening Date24 Oct 2026
Closing Date16 Nov 2026
Tender Amount₹ 25,25,688.03
Costs
EMD
₹ 50,500Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Modification Work In Signaling At Kkvs & Kskd Along With Shifting Of The Existing Msdac Of Kkvs To Kskd Including Allied Works In View Of The Rehabilitation Of Kkvs Station On The Newly Built Up Pf/old Pf Of Both Up And Dn Lines"
Contact
Tender Id
ST-WORKS-32-2026-METRO-KOL-HQ-S AND T/METRO RAILWAYTender No
ST-WORKS-32-2026Tender Authority
Metro Railway ViewPurchaser Address
-Website
https://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
"Supply of Ethernet Cable for interfacing in between GDI to ACE of MSDAC system- Eldyne make.Inspection:Consignee"
5
27863
139316.4
... More
"Modification/upgradation, validation and alteration of data logger as per site engineer. This includes changes of NMDL software etc. Also data logger to be interfaced with PI/ EI 16 equipment kept at the relay room. This work includes validation, wiring, etc. For this work necessary wire from relay to tag block & from tag block to data logger and tag block, terminal, wiring material etc. required for this work to be supplied by contractor. Note - Wire to be procured from RDSO approved firms and to be inspected by consignee."
1
66600
66600.23
... More
"Installation, wiring, testing and commissioning of Auto Reset Box and it's all 4 accessories at site. All the tools and plants for installation and necessary wires for wiring have to be arranged by the contractor. Auto Reset Box will be supplied by contractor and transportation from KNOA store to site to be done by the contractor.
5
7550
37750
... More
"Protection, adjustments and reinstating of S & T gears by deputation of Helper/Unskilled labour for executing additional Signalling & Telecom portion of the works. The work can involve fixing, releasing, dismantling, replacement, excavation, clearing of vegetation, loading 17 and unloading of material and assisting skilled persons etc. as per instruction of Railway representative at site. The contractor has to carry materials to field and the released materials from site has to be taken back to the concerned SSE/Signal/ store. The contractor has to arrange necessary tools such as bar, sickle, cutter, pickaxe, rake, hoe etc. as per instruction of Railway representative.
100
975
97586
... More
"Installation, wiring, testing and commissioning of Reset panel and it's all accessories 4 at site. All the tools and plants for installation and necessary wires for wiring have to be arranged by the contractor. Reset Panel will be supplied by railways and transportation from KKVS to site, to be done by the contractor.
2
9550
19100
... More
"Supervision of DP installation & Quality commissioning with OEM's certification by Eldyne Engineer of MSDAC System- Eldyne make.(To be arranged by the Contractor).
12
13216
158592
... More
"Writing letter with synthetic enamel paint of any approved colour, make and brand, size of letter 25 mm to 125 mm.( All required materials are to be supplied by the contractor).
1000
14
14000
... More
Supply of Graphics diagnostic interface (GDI) system for diagnosis as well as analysis of failure in MSDAC System -Eldyne make.Inspection:Consignee
2
163027
326055.24
... More
"Laying & Wiring of 1 x 16 (126/0.3) Sq.mm. multi strand copper Power supply cable 6 from IPS module in IPS room to ACE inside AFTC room at KSKD.Note-All the accessories and necessary items required for wiring have to be arranged by the contractor including the wiring of power supply arrangement to the central evaluator (ACE).
450
65
29250
... More
"Protection, adjustments and reinstating of S & T gears by deputation of Fitter/wireman /Painter/welder /Mason/cable jointer i.e., Skilled labour for executing additional Signalling & Telecom portion of the works. The work can involve fixing, releasing, dismantling, 18 replacement, painting or alteration of various signalling assets or parts, termination of cables, minor patch work on damages at location box, Plastering, concreting brick work, wiring alterations, cable jointing etc. as per instruction of Railway representative at site. The contractor has to carry materials to field and the released materials from site has to be taken back to the concerned SSE/Signal store. The contractor has to arrange necessary tools for carrying out the work as per Railway representative instruction. Inspection:Consignee"
50
1189
59472
... More
"Supervision of MSDAC ACE (Eldyne make) installation with Reset Box/Panel & Quality commissioning with OEM's certification by Eldyne Engineer of MSDAC System- Eldyne make. (To be arranged by the Contractor).
2
65372
130744
... More
"Alteration Modification, cable termination, wiring, testing & commissioning of existing Integrated power supply panel as per approved power supply diagram and specification. The contactor has to supply drawings in tracing paper in the format supplied by railways.
1
8329
8329.94
... More
"Carrying out relay alteration to the existing relay wiring including addition of new relay/deletion of existing relay at relay rack/location box as per the approved circuit diagram. These 19 works include the releasing of existing unused wires and wiring the relays using 16/0.2 mm copper wire as per RDSO Spec. Wire to be procured from RDSO's approved source and all required material like wire, soldering material, paint, resistances and condensers etc, to be supplied by the contractor for execution of the work.
30
295
8876.7
... More
"Fixing, Wiring, testing, installation & commissioning of Graphics diagnostic interface (GDI) system for MSDAC System -Eldyne make.Note-All the accessories and necessary items required for wiring have to be arranged by the contractor.
2
13500
27000
... More
"Supply of Tag block 200 way/160 way with PVC covers as per IRS:S-77/2006 (Rev.1) or latest & Drg. No. SA- 24751 & 52. Requirement of each type shall be specified by Engineer-in- charge. NOTE: In case ABB type relays are proposed to be used with 100 way block then Two 100 way Tag Block will be considered as one 200 way Tag Block. Note - Wire to be procured from RDSO approved firms and to be inspected by consignee."
-
-
2
... More
"De-activation of programming & un-wiring of DP's and it's accessories.
-
-
10
... More
"Supply of Carrier Rails for above 35 mm. x 7.5 mm., 1 mm./0.039 in thickness un- slotted type as per site requirement. Inspection: Consignee."
100
137
13756
... More
"Grouting, erecting, fixing, planking, fitting work of Rack for ACE installation alongwith the wiring, testing and commissioning of Axle Counter Evaluator (ACE) at KSKD. This include installation, wiring, testing and commissioning of complete MSDAC ACE of Eldyne make to have compatibility with the existing MSDAC system of Eldyne make. This work also involves all other 6 related accessories like PDCU, Central Evaluator and its accessories/interface device, cards etc. if any. All the tools and plants for installation and necessary wires for wiring work have to be arranged by the contractor. Wiring from cable termination rack to the central evaluator. Other accessories like ACEs, PDCUs, CPU and other cards, relays, PSUs will be supplied by railways and transportation from KNOA store to be done by contractor.Note- All execution/installation materials as required to be supplied by the contractor. Supply of ACE, PDCU, Serial and Parallel card, CPU & PSU will be supplied by railways.
2
23500
47000
... More
"Termination of Outdoor Cables (Main Cables /tail cables) in location boxes, cable 13 termination rack in relay room, station building, etc. The item includes dressing of cables and wires with dressing threads as per standard practice. All material required for this item will be supplied by the contractor (Lugs, eyelets, Power cables should be terminated with suitable lugs/eyelets wherever applicable).
500
6
3225
... More
"Transportation and laying of signaling cables(12/24/30c) / 6-quad cables of different sizes should be drawn through DWC pipe/Cable duct as per cable route plan & meggering of all main and tail cable. Railway will supply Cables and DWC pipe. Transportation of cables from Signal store/KNOA to work site by the firm. Cable duct cover will be properly placed after laying of cables.
4
25000
100000
... More
"Installation of DWC pipe of size minimum outer dia 120mm & minimum inner dia 11 103mm for carrying out track/road crossing or parallel to track of cable as instruction of Railway site Engineer. Note: DWC pipe will be supplied by Railways. This includes transportation of materials from SSE/Sig/Store to work site.
500
108
54165
... More
Programming of MSDAC Axle counter evaluator (ACE) by Eldyne Engineer (To be arranged by the Contractor).
2
325208
650416
... More
"Installation, wiring, testing and commissioning of Manual Reset Box and it's all 3 accessories at site. All the tools and plants for installation and necessary wires for wiring have to be arranged by the contractor. manual Reset Box with panel and LV box will be supplied by railways and transportation from KKVS to site to be done by the contractor.
5
8200
41000
... More
Supply of Auto Reset Box Model No-ERBM03 of Eldyne make MSDAC. Inspection:Consignee
5
29778
148890

