Kolkata Port Trust Tender
... More
The KOPT has issued a formal invitation for competitive bids for the Kolkata Port Trust project, for Development Of Proposed Food Street At Helen Keller Sarani in Kolkata, West Bengal, with an estimated contract value of Rs. 2,25,28,875. The bid opening date for this tender is 09-01-2025 and the last date for bid submission is 30-01-2025. Interested bidders for Kolkata Port Trust tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Kolkata Port Trust - KOPT Tender
Food Products
Eprocure
Opening Date9 Jan 2025
Closing Date30 Jan 2025
Tender Amount₹ 2,25,28,875
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender to bid having value is between Rs. 5,000/- to Rs. 1,00,000/-. The earnest money deposit required is a fixed amount of Rs. 5,000/- for tenders within this value range. The bid capacity required can be determined by the following conditions and formulas: 1. Completed works: - For two completed works: 2 * 0.5 * Estimated Amount - For one completed work: 1 * 0.8 * Estimated Amount 2. Average Annual Financial Turnover: 0.3 * Estimated Amount Given the estimated cost of the work, the calculated values are:
- For two completed works: ₹2,25,28,874.84
- For one completed work: ₹1,80,23,099.87
- Average Annual Financial Turnover: ₹67,56,86,624.52 These values represent the minimum requirements for the bidder's completed works and average annual financial turnover to be eligible for the tender.
Technical Capacity
... View More
The bidder should have completed either 2 works, each costing not less than 50% of the estimated amount, or 1 work costing not less than 80% of the estimated amount. For two works, each work should be at least 50% of ₹2,25,28,874.84, which is ₹1,12,64,437.42. For one work, the work should be at least 80% of ₹2,25,28,874.84, which is ₹1,80,23,099.87. Additionally, work experience as a sub-contractor is considered as the requisite qualification if the credential is issued by the client.
Costs
EMD
₹ 4,50,580Document Cost
₹ 2,950Tender Fee
Refer Documents
Summary
Development Of Proposed Food Street At Helen Keller Sarani
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_KoPT_843598_1Bid Award Id
ViewTender No
SMPK/KDS/CIV/T/2918/100Tender Authority
Kolkata Port Trust ViewPurchaser Address
-Website
http://http://www.kolkataporttrust.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
(ii) 40 mm
5
848
4240
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With other than hi-gloss of approved quality-
(ii) Two coats (white in shade)
120
70
8400
... More
Supplying, fitting and fixing check valve (vertical) G.M. tested to 21 kg per sq. cm.
-
-
-
... More
Labour for laying single brick flat soling including ramming and dressing bed to proper level and filling joints with powdered earth.
65
40
2600
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. 550 mm X 400 mm size
4
2208
8832
... More
(A) Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick
cement slurry at back side of tiles using cement @ 2.91
Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m.
(b) Area of each tile above 0.09 Sq.m
(i) Coloured decorative
20
920
18400
... More
(a) 32 mm
5
190
950
... More
Supplying,providing and installation of FRP make/other material sitting chair as per details.
45
2750
123750
... More
40 mm dia
200
292
58400
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
15 mm thick plaster(1:4)
In Ground Floor
10
167
1670
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety
2
6876
13752
... More
Providing and fixing exterior quality Aluminium Composite Panel (ACP) wall cladding on existing Al. /MS frame work with GI brackets, ACP fixed on the existing frame work by folding the edges of ACP panel (Engraving the rear surface of ACP sheet) with CP angles, cleats and strainless Steel screws forming groves at the periphery of ACP panel. Such grooves filled with foam and silicon sealant etc. complete with all materials (but including the cost of silicon sealant), labour, scaffolding and all other incidental charges complete in all respect as per specification and direction of Engineer-in-charge. (Mode of payment is on finished surface area of ACP)
(b) 4mm thick (0.50mm Al.+3.0mm LDPE +0.50mm Al. PVDF coating)
2770
2878
7972060
... More
iii) Cleat angle ( Non-annodized).
8
263
2104
... More
100 mm dia
100
1162
116200
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces bysand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
210
38
7980
... More
Supplying and laying true to line and level vitrified tiles of
approved brand (size not less than 600 mm X 600 mm X 10
mm thick) in floor, skirting etc. set in 20 mm sand cement
mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge. (White cement, synthetic adhesive and grout material to be supplied by the contractor) With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Deep Colour & White
350
1704
596400
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer
-
-
-
... More
Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo- usible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.). Membrane Property: Softening Point 150 deg C, Cold Flexibility -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)
10
407
4070
... More
Supplying & laying 3mm thick pre-fabricated plastomeric water proofing membrane conforming to EN 12311-1 & ASTMD 5147, manufactured with atactic poly propylene (APP) modified premium grade asphalt , specially reinforced with non-woven polyester core with polyester reinforcement @160 gms per sqm & both faces covered with thermo- usible polyethylene film /MineraL on top face over a coat of primer @ 0.40 lit/sqm of manufacturer's specification on smooth,clean dry surface prepared wherever required.Lap joint shall be provided of 75 mm in longitudinal & 100 mm in transverse direction and fused using LPG/ Propane torch employing extra care ensuring full bondage, complete removal of entrapped air and sealing edges into grooves in appropriate manner as per direction of Engineer -in-charge all complete including materials,labour and applicable taxes. (Payment shall be made on the basis of finished surface area.).
Membrane Property: Softening Point 150 deg C, Cold Flexibility -6 deg C, Tensile Strength, N/cm : 600 (longitudinal), 450 (transverse), Tearing Strength, N: 300 (longitudinal), 200 (transverse)
40
407
16280
... More
Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
3
1317
3951.42
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces bysand papering etc.
770
29
22330
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour.
In ground floor.
3 mm. thick topping (High polishing grinding on this item is
not permitted with ordinary cement).
Using grey cement
(ii) 25 mm. thick
6
273
1638
... More
Supplying, fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long
10
82
820
... More
ii) Louvered Section.
8
658
5264
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
6
19
114
... More
Chromium plated Bib Cock short body (Equivalent toCode No. 511& Model - Tropical / Sumthing Special of ESSCO or similar brand).
4
539
2156
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety
9
6876
61884
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
1250
24
30000
... More
Supplying, fitting and fixing C.I. round grating.
100 mm
10
62
620
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete.
-
-
-
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. With 'P' trap
3
1421
4263
... More
Galvanised corrugated iron sheet work (excluding the supporting frame work) fitted and fixed with 10 mm. dia J or L hook-bolts, limpet and bitumen washers and putty complete with 150 mm. end lap and one corrugation minimum side lap. (Payment to be made on area of finished work)(GCI sheet to be supplied by contractor)
(i) In Roof:-
a) With 0.60 mm thick sheet
370
619
229030
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
8
7611
60888
... More
Supplying, fitting and fixing best quality Indian make mirror 5.5 mm thick with silvering as per I.S.I. specifications supported on fibre glass frame of any colour, frame size 550 mm X 400 mm
4
613
2452
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls
and floors to match with the existing work & 4 nos. of key
stones (10mm) fixed with araldite at the back of each tile &
finishing the joints with white cement mixed with colouring
oxide if required to match the colour of tiles including
roughening of concrete surface, if necessary or by synthetic
adhesive & grout materials etc.
(B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick
cement slurry at back side of tiles using cement @ 2.91
Kg/Sq.m & joint filling using white cement slurry @
0.20kg/Sq.m.
(b) Area of each tile above 0.09 Sq.m
(i) Coloured decorative
60
1109
66540
... More
Earth work in filling in foundation trenches or plinth with good earth obtained from excavation of foundation in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. (Payment to be Made on the basis of the Measurement of finish quality of work).
25
77
1938.5
... More
Supplying, Fitting & Fixing Factory made P.V.C. door frame of size 50 mmx47 mm with a wall thickness of 5 mm, made out of extruded 5 mm, PVC sheet miter cut at two corners and joined with two nos of 1.5 mm long brackets of 15 mm x15 mm M.S. square tube. The two vertical door profiles are to be reinforced with 19 mmx 19 mm M.S. quare tube of 19 gauge, weather seal to be provided through out the rame. The door frame shall be fixed with the wall using 65/100 mm long M.S. Screws through the frame by using P.V.C fasteners. A minimum of 4 Nos of screws to be provided for ach vertical member and minimum 2 Nos for horizontal member etc. complete as per anufacturer‟s specification and direction of Engineer-in-Charge.
24
305
7320
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. Polythene Flush Pipe
3
155
465
... More
Earth work in excavation of the foundation tranches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils within a lead of 75Mtr as directed. The Item including necessary trimming the sides of tranches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not exceeding 1500 mm.
90
119
10734.3
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
900
361
324900
... More
Labour for fitting and fixing high density poly-ethylene pipes or P.V.C.pipes for above ground work including cost of jointing materials paints etc. fitting and fixing all necessary specials, cutting pipes, making threads, cutting holes in walls or R.C. floor where necessary and mending good all damages excluding the cost of masonry or concrete work, if necessary, but including the cost and fitting and fixing holder bat clamps(any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineer-in-charge.(Payment will be made on centre line measurement of the total pipeline including specials. ) above ground
-
-
-
... More
1000 litre capacity
2
5128
10256
... More
Supplying, Fitting & Fixing 30 mm thick Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 m for styles, top and bottom rails, M.S. frame shall have cost of steel primers of approved make and manufacture, M.S. frame covered with 5 mm th. heat moulded PVC “C” channel of size 30 mm th, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on either sides forming styles; and 5 mm th. 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm tapered in 45 degree on the inner side to form top & bottom rail and 115 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided either side of the panel with 10 mm (5 mmx2) th.,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 5 mm th. both side PVC sheet to be fitted in the M.S. frame welded/sealed to the styles &rails with 7 mm (5 mm+2 mm) th.x15 mm wide PVC sheet beading on inner side and joined together with solvent cement adhesive. An additional 5 mm th. PVC strip of 20 mm which is to be stuck on the interior side of the “C” channel using PVC solvent adhesive etc. complete excluding all necessary hardwares as per direction of Engineer-in-Charge. In ground floor.
8
1943
15544
... More
Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.).
40 mm
6
1646
9876
... More
(C) Elbow
-
-
-
... More
Brick work with 1st class bricks in cement mortar (1:6)
In superstructure, ground floor
18
5636
101448
... More
Panel shutters of door and window, as per design (each panel consisting of single plank without joint), including fitting and fixing the same in position but excluding the cost of hinge and other fittings.
In ground floor.
35mm thick shutters with 19mm thick panel of size 30 to 45 cm.
Sishu, Gamar, Champ,Badam,Bhola, Mogra, Hallak.
2
2948
5896
... More
100 mm thick interlocking designer concrete paver block M-50 grade for hightraffic zone, bus terminus, industrial complex, mandi houses etc. as per IS: 15658- 2006 (over 20-40 mm medium sand bed on 250mm thk WBM/ WMM base course & 250 mm thk bound gnaular/ granular sub-base course & filling the interstices of blocks with fine sand by brooming & subsequent watering including cost of sand for sand bed but excluding cost of base, sub-base course & subgrade preparation.) complete as per direction of Engineer-in-Charge. [Note: Subgrade CBR shouldnot be less than 5]
Grey
630
2058
1296540
... More
470 mm X280 mm X340 mm
2
945
1890
... More
Brick work with 1st class bricks in cement mortar (1:6)
In foundation and plinth
29
5413
156977
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987.
6mm thick coloured / tinted / smoke glass.
3
661
1983
... More
Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
150
1317
197571
... More
(b) 40 mm
5
238
1190
... More
40 mm
15
42
630
... More
40 mm thick fine dressed stone flooring over 20 mm (agerage) thick base of cement mortar 1:5 (1 cement: 5 coarse sand) with joints finished flush.
Red sand stone
140
1280
179214
... More
Brick work with 1st class bricks in cement mortar (1:6)
In superstructure, ground floor
1
5636
5636
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
3
1015
3045
... More
M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting to requisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof.
80
74900
5992000
... More
Earth work in excavation of the foundation tranches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils within a lead of 75Mtr as directed. The Item including necessary trimming the sides of tranches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not exceeding 1500 mm.
72
119
8587.44
... More
Brick work with 1st class bricks in cement mortar (1:6)
In foundation and plinth
5
5413
27065
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(a) On steel or other metal surface :
With super gloss(hi-gloss).
(ii) Two coats (with any shade except white)
770
79
60830
... More
Filling in foundation or plinth by fine sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity)
37
1317
48734.18
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor
21
736
15456
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(a) For Exposed Work PVC Pipes
-
-
-
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
15
24
360
... More
Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces bysand papering etc.(This item is applicable to new work or old work when the original surface has been exposed by removal of old paint.)
120
38
4560
... More
Supplying, fitting & fixing H.C.I. bend with door conforming to I.S.S. including jointing complete and painting two coats to the exposed surface with approved paint complete. (Payment of Painting will however be paid seperately). With valamoid joints including sealing the top with cement mortar (4:1) 100 mm dia.
10
543
5430
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per 100 sq.m.
6
34
204
... More
Supplying, fitting & fixing Cast iron soil pipe only conforming to I.S. 3989 / 2009 and I.S. 1729/2002 with bobbins, nails etc. including making holes in the wall, floor etc. and cutting trenches etc. in any floor through masonry concrete, if necessary, and mending good damages with necessary jointing materials and painting two coats to the exposed surface with approved paint complete. (Measurement will be made along the center line of the total pipe line in fitted condition including specials,payment for specials & Painting will however be paid seperately).
With valamoid joints including sealing with sand cement morter (4:1) upto quarter depth.100 mm dia. (internal)
150
688
103200
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
15 mm thick plaster(1:4)
In Ground Floor
210
167
35070
... More
Supplying profiles of required section made of Aluminium Alloy Extrusions conforming to IS: 732-1983 and IS: 1285- 1975; Annodized (with required film thickness and specified colour / natural) matt finished conforming to IS: 1868-1983 for fabrication of composit door, sliding & casement windows, partitions, formed of basic sections of any ISI embossed / certified make and brand as per direction of Engineer - In- Charge. (Payment will be made on finished length of the work).
(A) In 10-12 Micron thickness Annodizing film
I) Natural white
h) Louvered window.
-
-
-
... More
Hire and labour charges for the shuttering with centering and necessary staging up to 4Mtr using approved stout props and 25 mm to 30 mm thick hard wood planks of approved thickness with required bracing for concrete slabs ,beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of the works (up to roof of ground floor) as per the direction of Engineer – In – Charge. Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
12
369
4428
... More
Hire and labour charges for the shuttering with centering and necessary staging up to 4Mtr using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs,beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of the works (up to roof of ground floor) as per the direction of Engineer – In – Charge.
Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
64
369
23616
... More
Provide Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m
Tor steel/Mild steel. JSW/JSPL/SHYAM/ SRMB/BMASL /ELECROSTEEL /SSL
0.3
60150
18045
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface]
15 mm thick plaster(1:4)
In Ground Floor
100
167
16700
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary :
(a) On timber or plastered surface :
With other than hi-gloss of approved quality-
(ii) Two coats (white in shade)
210
70
14700
... More
(b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
3
493
1479
... More
40 mm dia
200
37
7400
... More
Supplying, fitting and fixing PVC pipes for underground work of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). withall necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted including cost of all materials ,jointing materials, cutting pipes, making threads ,cutting trenches upto 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. (Payment will be made on the centre line measurement of the total pipe line including all specials No separate payment will be made for accessories, specials.)
-
-
-
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. E.W.C.
. Plastic (hallow type) black
3
302
906
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
3
7611
22833
... More
40 mm
15
69
1035
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur Variety
230
6876
1581480
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). Sal : Local
0.05
77671
3883.55
... More
Provide Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. For works in foundation and upto roof of ground floor/upto 4 m
Tor steel/Mild steel. JSW/JSPL/SHYAM/ SRMB/BMASL /ELECROSTEEL /SSL
20
60150
1203000
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.
Pakur Variety
100
7611
761100
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
19
34
646
... More
(B) Socket
-
-
-
... More
Earth work in excavation of the foundation tranches or drains in all sorts of soil (including mixed soil but excluding laterite or sand stone) including removing spreading or stacking the spoils within a lead of 75Mtr as directed. The Item including necessary trimming the sides of tranches, levelling, dressing and ramming the bottom, bailing out water etc. as required complete. Depth of excavation not exceeding 1500 mm.
15
119
1789.05
... More
i) Top, bottom and side member.
12
183
2196
... More
Hire and labour charges for the shuttering with centering and necessary staging up to 4Mtr using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs beams, columns, lintels curved or straight including fittings, fixing and striking out after completion of the works (up to roof of ground floor) as per the direction of Engineer – In – Charge. Steel shuttering or 9 to 12 mm thick approved quality ply board shuttering in any concrete work
550
369
202950
... More
100 mm
15
479
7185
... More
Earth work in filling in foundation trenches or plinth with good earth obtained from excavation of foundation in layers not exceeding 150mm including watering and ramming etc. layer by layer complete. (Payment to be Made on the basis of the Measurement of finish quality of work).
10
77
775.4
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I).
-
-
-
... More
(b) Supplying fitting and fixing steel rolling grills link type, shutter with 18 B.G .of approved type steel to the section 75mm wide, fitted with coil wire spring to necessiate the fitting of required Nos. of C.I. Pulleys on heavy type solid drawn seamless steel tube complete with locking arrangements both inside and outside specially builtup side guide channels including providing a hood for the steel rolling shutter in the room, painting two coats of approved aluminium paint over a coat of red lead primer complete.
160
2833
453280
... More
Supplying, fitting and fixing Waste fittings complete. C.P. over brass
-
-
-
... More
100 mm
15
242
3630
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
65
361
23465
... More
Brick work with 1st class bricks in cement mortar (1:6)
In superstructure, ground floor
5
5636
28180
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements