Indian Institute Of Science Education And Research Tender

Supply of following size 1.1 KV grade XLPE insulated insulated and PVC sheathed Armoured Aluminium power cable(A2XFY) of following technical Data sheet : 1.1 kV (A.C) & 1.5 kV (D.C ) to Earth AL conductor, XLPE insulated, galvanised steel strip / wire armoured Cables as per IS 7098 Part -1. Conductor : AL stranded compact shaped conductor as per Cl. 2, IS 8130. Insulation : Crosslinked polyethylene (XLPE) Phase Core Color : Red, yellow, blue Neutral Core Color : Black Inner Sheath : PVC / PVC tape as per IS 7098 (P - 1) Armouring : Single armouring of galvanised steel strip / wire Outer Sheath : PVC Type ST - 2 as per IS 5831. ( FRLS Type) Cable Color : Black Bidder should note that sample of the cable should be approved prior to the delivery at site form the same drum and athe cables will be supplied along with Factory Routuinee & type test cerificates for that perticular drum Make: Finolex, Polycab, Havells,KEI

3 X 6 sq. mm

4C x 50 Sqmm

Supplying and making end termination with brass double compression gland for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Size: 3 X 6 sq. Mm Make: Comet, Dowells,Connectwell

Supplying and making aluminum Lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. Size: Aluminium lugs for 3 Cx 6 sq. mm cable (Crimp/ring Type Long Barrel) Make: Comet, Dowells,Connectwell

Supplying and fixing cable route marker with 10 cm X 10 cm X 5 mm thick G.I. plate with inscription there on, bolted /welded to 35 mm X 35 mm X 6 mm angle iron, 60 cm long and fixing the same in ground as required. Make-Reputed

Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc.with charcoal/ coke and salt as required. Make-Reputed

Supply & fixing of IP65 Decorative vintage type decorative Bollard made of Die Casted and extruded Aluminum Body & poly carbonate Diffuser of minimum 0.9-1 Meter height with E-27 /B-22 Holder suitable for fixing RGB LED Fixture (15 Watt) of approved make with integrated Junction Box and having base plate with holes for direct mounting in foundation, connection wire, testing etc. to complete the job as directed by EIC Make: Signify/Bajaj/ Havells/Orient/Crompton//Dwarka India/Homedec Lighting/Bright Solar Technology or equivalent as approved by EIC NOTE: Foundation work for bollard and s&f of RGB LED Lamps will be paid under scope of different item.

1:3:6 (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size) foundation in size of 150 MM X 150 MM X 600 MM (Length X width X Depth), foundation bolts of the bollard light shell be grouted in the foundation with 2 coat painting of each foundation with Exterior plastic emulsion paint including plaster, putti etc. as required for smooth surface as per the direction of EIC. Ordinary Portland Cement Grade 43: Ultratek, Birla, ACC, Ambuja

RGB Remote Controlled 12-16 Watt LED B22 (Pin type)/E27(Screw type) Bulb having lumens output with efficacy >80 lm/W Make: Same as Osram LEDVANCE Smart+ RGBWW NOTE: Rate should inclusive onsite warranty for a period of 2 years from date of installation of LED Luminaries.

Supply, installation testing and commissioning of Outdoor Double Door Kiosk type weather proof feeder pillar with bottom entry for power cables having cable gland cutting of suitable size and made out of 2.0 mm thick for load bearing members & 1.6 mm thick for doors, compartmentalized, IP 65, epoxy powder coated treated in 7 tank process finish with following items, front and back both side open able, duly hinged doors with locking arrangement by providing both sides hold drafts and all hardware for fabrication of box. The Kiosk should be mounted with hardware on angle iron frame long legs duly primered and black painted. Frame be grouted with cement concrete 1:3:6 ratio and providing brick masonry along angle iron frame above ground level complete with connecting strips, Bakelite sheet, earth stud etc. cable entry from bottom suitable for 3.5Cx 240 Sq.mm I/c & O/g respectively. The panel should comprise of as per following (Panel shall be fabricated in CPRI approved panel builder with approval of the Deptt. Drawing of the feeder pillar shall be submitted for approval prior to fabrication) Make: As per approval of Engineer-in-charge of IISER-K This outdoor feeder pillar consist of following feeder i) 400A 4 pole C/O switch having rotary handle -1 no. ii) 400 A Aluminum Busbar (R-Y-B-N) -in busbar chamber iii) 250 A 4 pole 36 KA MCCB with mirco processor based portection release .having rotary handle -1 nos. iv) 63 A MCB- 1 No v) phase indcation lamp(R-Y-B) with all interconnection Make- Panel-Reputed MCCB-L&T/ABB/Siemens/Legrands,

Repairing of outdoor compound light timer Control Unit for flag mast ground assembled with following accessories and wiring with 10 sq.mm Cu wire(For MCCB to Contractor / terminal block),4sq.mm Cu wire (For control wiring). ii)Supply & Installation of Digital 24 hour time switch(Make-GIC)-5 no. iii) Supply & installation of 70 A 4-Pole Power Contractor (Make: L&T/Legrand/ABB)-2nos. iv) Changing of 10 nos. 40A 4 way stud type terminals of connectwell make for respctive out going feeders v) Proper sleevings of Bus Bars as per requirement. vi) Cleaning of inner portion of the panel with proper clening agents vii) Dressing of cables and prepairing three pase connection for all the TP power contractors viii) Repairng of Doors of the panel with gasketing arrangemet for IP66 ix) Painting of feeder pillar after scrubbing the rust from feeder pillar with one coat of red oxide primer (of approved make, and brand) incl. preparation of surface by sand paper/emery paper, cleaning etc. and after that painting with two coats synthetic enamel paint (of approved make, and brand ) inner & outer side part of panel supply of all materials, labour and T&P, matching with existing color feeder pillar etc. as directed by the engineer-in charge complete in all respect.