District Magistrate Tender
... More
The DM has issued a formal invitation for competitive bids for the District Magistrate project, for Construction Of Community Sanitary Complex Including Installation Of Solar Submersible Tube Well 100 Mm X 100 Mm At Bandar Under Gangatikuri Gram Panchayet Under Ketugram-ii Panchayet Samity Within The Juridiction Of Purba Bardhaman Zilla Parisad in Murshidabad, West Bengal, with an estimated contract value of Rs. 4,99,785. The bid opening date for this tender is 03-04-2025 and the last date for bid submission is 14-04-2025. Interested bidders for District Magistrate tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
District Magistrate - DM Tender
Opening Date3 Apr 2025
Closing Date14 Apr 2025
Tender Amount₹ 4,99,785
Costs
EMD
₹ 10,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Construction Of Community Sanitary Complex Including Installation Of Solar Submersible Tube Well 100 Mm X 100 Mm At Bandar Under Gangatikuri Gram Panchayet Under Ketugram-ii Panchayet Samity Within The Juridiction Of Purba Bardhaman Zilla Parisad
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_DMB_832780_1Bid Award Id
ViewTender No
21(2ND Call)/2024-25/PS.Tender Authority
District Magistrate ViewPurchaser Address
-Website
http://wbtenders.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
20 mm dia
12
129
1548
... More
Providing and fixing factory made door frame (single rebate) made of single piece extruded solid PVC profile with homogenous fine cellular structure having smooth outer integral skin having 62mm width x 32 mm thickness (the door frame is to be made with single piece extruded solid pvc profile whereas no sheet pasted profile shall be applied for door frame fabrication) and shall be fixed to wall as per instructions of Engineer – in – charge using 100 x 8 sheet metal CSK screws
10.2
483
4926.6
... More
Supplying, fitting and fixing including supplying of suitable jointing compound for fixing in position, threading, if necessary etc. all complete.
-
-
-
... More
Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long
1
82
82
... More
(i) With 4:1 cement mortar 10 mm. thick plaster
6.54
123
804.79
... More
Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc.
NOTE:Cement 0.152 cu.m per100 sq.m.
7.88
34
267.75
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
13.25
324
4293
... More
Earthing:Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWGGI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S& F 15 mm dia GI pipe protection (1 Mt. long) to be filled with bitumen partly under the ground level and partly aboveground level driven to an average depth of 3.65 Mts. below the ground level as below: By lSI-Medium GI pipe including excavation of soil for installation of Earth Electrode and filling & ramming and connecting to individual structure to earth electrode including S&F20' mm x 3 mm galvanised(Hot Dip) MS flat on wall/floor with GI saddlesas required and connection to equipments incl. drilling holes,with bolts, nuts, washers etc complete.
1
2661
2661
... More
Drilling of bore hole of suitable diameter upto required depth by water jet system through any type of soil including hire and labour charges for boring pipes, scaffolding, other tools and plants etc. and taking out same all complete and other incidental works in this connection. The bore hole shouid have minimum 65 mm gap in between outside of the tube well pipe and bore .
-
-
-
... More
Supplying, fitting and fixing 10 litre porcelain low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internnal PVC fittings. White
1
1015
1015
... More
Ordinary Cement concrete [ Mix 3 : 1.5 : 1 ] with graded stone chips(20 mm.size) excluding shuttering and reinforcement, if any, in ground floor.as perrelevant IS codes.
4.43
5196
22994.56
... More
Providing & fixing factory made 30 mm thick factory made solid pvc door shutter made out of single piece extruded solid pvc profile . The style & rails shall be of size of 75 x 30 mm having wall thickness of 5 mm. The style and top bottom rail shall have one side a thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power. 15 mm thickness shall be of single piece extruded solid pvc profile whereas it shall be not be made of sheet pasted profile) . The styles and rails shall be reinforced with MS tube of size 18 mm(±) 1mm x 18 mm (±) 1mm x 1mm painted with primer all four corners of reinforcement to be welded or sealed . solid pvc extruded bidding (push fit type) will be set inside the styles and rails with a cavity to receive single piece extruded 5 mm pvc sheet as panel. The styles and rails will be metered cut and join with the help of pvc solvent cement, self tapping screw and braket of size 200 x 75 mm / welded at each corner. Single piece extruded solid pvc lockrail of size 100 x 30 mm with a wall thickness 5 mm & 15 mm integrally extruded in the middle of lockrail & fixed with styles with the help of PVC solvent cement & self driven self tapping screws of size 100mm x 8mm complete as per manufacturers specifications and direction of Engineer-in-Charge. a) Factory made Single piece non decorative extruded PVC profiles door shutter(mat / plain finish)
3.78
2348
8875.44
... More
Supplying,fitting and fixing 32 mm dia. Flush Pipe of approved make with necessary fixing materials and clamps complete. i) Polythene Flush Pipe
1
155
155
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints or rougening of concrete surface, including throating, nosing and drip course where necessary (ground floor)
-
-
-
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
2
19
38
... More
Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 (i) Single Socketed 3 Meter Length (b) 110 mm
1
292
292
... More
Construction of circular soak well 2.5 metre deep in all types of sandy soils with drybrick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brick work, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L.and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) including R.C.C. cover slab of 100 mm thick with cement conc (1:1.5:3) with stone chips with necessary reinforcement and shuttering including one 560 mm dia. R.C.C. manhole cover (heavy type)of approved make supplied, fitted and fixed in the cover slab with necessary fittings, making nacessary arrangements for pipe connections, excavation of well including shoring, dewatering and removing the exess earth from the premises as per direction complete in all respect with all costs of labour and materials. With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and 1.00m inside dia. (SAIL/TATA/RINL)
1
15272
15272
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint. (ii) 550 mm X 400 mm size
1
2208
2208
... More
c) 100 mm dia plug of approved make conforming to IS Specification.
1
150
150.87
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative
34.44
737
25382.28
... More
PVC screen (Ribbed) pipes of nominal dia 100 mm (OD 117 mm ), wall thickness 5.0 mm, conforming to IS: 12818/1997
6
817
4902
... More
Supply of PVC pipes & fittings Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). (A) PVC Pipes 32 mm dia
30
169
5070
... More
Filling in foundation or plinth by silver sand in layers not exceeding 150 mm. as directed and consolidating same by thorough saturation with water ramming complete, including the cost of supply of sand. (Payment to be made on measurement of finished quantity)
3.77
71159
2679.85
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass
3
468
1404
... More
80 mm dia 6 mm thick heavy duty MS Supporting clamp with 2 nos 12 mm dia 65 mm long bolts, nuts and washer on each side for holding column pipe.
1
2185
2185
... More
Add SGST @ 18% (It 1-60)
1
75483
75483.62
... More
125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor
30.93
664
20537.52
... More
Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (a) E.W.C. (ii) Plastic (hallow type) white
1
380
380
... More
Labour charges for lowering of pipe, strainers, blank pipes etc. and fitting, fixing the same including cutting, threading where necessary complete including bucket washing and other incidental works in this connection.
-
-
-
... More
Construction of septic tank of different capacities as per approved drawing with 1stclass brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manholecover(heavy type)of approved make supplied, fitted and fixed in the 100mm thickR.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1)with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificialstone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting andfixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavationearth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removingspoils, filling up the chamber with clear water, removing foreign materials from thechamber and including constructing attachedinspection pit as perapproved drawingand connecting all necessary pipes, joints etc.with internal plaster work and artificialstone flooring is to be donewith admixture of water proofing compound @ 0.5% byweight ofcement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm.Ventilation pipe & Mosquito proof mesh, should be follwed as per IS:2470,Part-I. Payment will be made separetly on the basis of actual height based onrelevant
I.S.Code.(i) For 10 users
1
33598
33598
... More
(i) With 6:1 cement mortar 15 mm. thick plaster
92.15
136
12531.72
... More
Supplying, fitting and fixing bib cock or stop cock. (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent)
5
89
445
... More
Labour for hoisting plastic water storage tank. (ii) Above 1500 litre upto 5000 litre capacity. (a) Upto 1st story from G.L.
1
154
154
... More
Cable and Accessories: Supplying, fitting and fixings of UV rated Copper Cable laid in side HDPE conduit and other accessories as per followings with necessary connection with theSolar PV Module, MPPT etc. i. 4.0 Sqmm single core multi studs-5m (for1HP/2HP/3HP) & 20m (for 5/10/15/17.5/20 HP) ii. Lugs, HDPE Pipe, Flexible Pipe, Saddle, Cable tie etc a) For 1 HP/2 HP/3HP per structure
2
1134
2268
... More
Making arrangement and showing verticality test including cost/hire charges of necessary tools and plants, scaffolding, labour etc. all complete as per direction of Engineer-in-Charge.
1
858
858.08
... More
PVC pipes of nominal dia 100 mm, wall thickness 5.0 mm, conforming to IS: 12818/1997 (medium casing)
57
510
29070
... More
Collapsible gate with 40 mm x 40 mm x 6 mm Tee as top and bottom guide rail, 20 mm x 10 mm x 2 mm vertical channels 100 mm apart in fully stretched position 20 mm x 5 mm M.S flats as collapsible bracings properly riveted and washered including 38 mm steel rollers including locking arrangements, fitted and fixed in position with lugs set in cement concrete and including cutting necessary holes, chasing etc in walls, floors etc and making good damages complete in Ground floor
2.52
3402
8573.04
... More
Supply and instalation of 80 mm bore well 1 HP Submesible pump 1 HP as per direction of EIC
1
12000
12000
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (d) 2000 litre capacity
1
10434
10434
... More
Collecting sample of water for bacteriological and chemical test from any depth at any time during execution of work including hire and labour charges for tools and plants and sterilising the equipments, paying all charges and fees, testing etc. complete in all respect as per direction.
1
1231
1231
... More
a) 100 mm dia CI/Steel cutter piece upto 450 mm long with socket.
1
330
330.03
... More
I) For lowering 100 mm. dia GI/PVC pipe.
66
262
17301.24
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m (i) Coloured decorative
6.25
894
5587.5
... More
Hire and labour charges for shuttering with centreing and necessary staging upto 4 m. using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams, columns, lintels curved or straight including fitting, fixing and striking out after completion of works. (upto roof of ground floor) 25 mm to 30 mm shuttering without staging in foundation
38.39
328
12593.23
... More
Supplying and filling up of the annular space between the Well Pipe and the bore hole by coarse sand including watering as necessary as per direction of the Engineer-in-Charge.
3
743
2229.78
... More
Lightning protection (Polemounted): Lightning protection with 1.5" G.I pipe of 4 mts +0.75 mts height with base flange in proper RCC foundation and S&F Lightning Conductor Air Terminal made of 20 mm dia 1000 mm long GI pipe (ISI Medium) having five discharge prongs of 4SWG GI (HotDip) wire at top duly soldered with 7/16 stranded GI (HotDip) wire and 85 mm dia 6 mm thick GI base plate at bottom incl. necessary holes etc. Earthing with 65 mm dia GI pipe (Medium) 3.0 Mts .long and 1x19/10 stranded GI (HotDip) wire (4Mts.long), 20 mm dia x125 mm long galvanized bolt, double nuts, double washers including socketing at both ends of stranded GI (HotDip) wire by crimping sockets /thimbles and S&F 65 mm dia GI pipe (ISI-Medium) protection (3 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level to an average depth of 3.65 Mts.(Provision of one lightning protection for each structure)
1
6725
6725
... More
Power conditioning unit with enclosure :Supply,transport,installation and commissioning of Solar Power conditioning Unit consisting of following components and features: 1)Variable frequency Drive within built MPPT ,voltage range suitable for operating pump-motor set of 1HP to 20HP, detail mentioned in 2) Power input : DC source for 1HP, 2HP and 3HP.3) Power input : AC / DC source or hybrid for 5HP and above. 4) Incomer: DC MCB 2 Pole 16 amp upto 7.5HP, 25 amp for 7.5HP and 10HP, 40 amp for 15 to 20HP as per IS/IEC60947-2 5) Incomer: AC MCB 4 pole16 amp for 5.0HP, 25 amp for 7.5HP and 10HP, 40 amp for15 to 20HP as per IS/IEC60947-2 6) Type II DC SPD of 40 KA. 7) Type II AC SPD of 40 KA for AC/ DC or Hybrid input. 8) Dualinput (solar/Grid) 25 amp changeover switch for 5HP and 7.5 HP, 40 amp for 10 HP, 63 amp for 15 to 20 HP 9) Reverse protection diode 1600 VDC with heat sink.10) Data Logger.11) Remote monitoring system.12) Should have built –in EMC filters .13)IP 65 glands for cable in and out.14) Min. IP 54 enclosure. a) For 1 HP capacity Pump-motor set with DC input.
1
19056
19056
... More
(B) Socket 32 mm dia
10
33
330
... More
Brick work with 1st class bricks in cement mortar (1:6) (b) In Super Structure
0.26
5035
1324.21
... More
Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.
4.87
11927
580.37
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (ii) 470 mm X 280 mm X 340 mm
1
945
945
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups,binders etc. including supply of rods, initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape,placing in proper position and binding with 16 gauge black annealed wire at every inter-section, complete as per drawing and direction. (a) For works in foundation, basement and upto roof of ground floor / upto 4m. (i) Tor steel/Mild steel
0.38
55254
21107.38
... More
i)100 mm dia UPVC Pipe with bottom cutter, Screen (Ribbed) pipes, blank pipe.
63
70
4455.99
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)
(a) For Exposed Work
PVC Pipes
15 mm (Dia)
18
101
1818
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion
90.81
84
7628.29
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement, if any, in ground floor as per relevant IS codes.
1.01
4690
4732.47
... More
Supply,transport,installation and commissioning of ISI marked Solar Modules as per following specification: 1.Cell:Indigenous monocrystalline silicon SPV cells 2.Solar Module: Monocrystalline cell with PERC technology/ module with bifacial cell. 3. Standards: ISI marked as per IS14286 and having certification of IEC61853(1), 61730(1&2),617104.ModulesmustqualifytoIS170210(Part1) 5.Min.Efficiency:19.5%. 6.Fill factor: Morethan 75%. 7.Module wattage mismatch in the SPV array: within ±3% 8.Wattage output warranty: Should not be less than 90% at the end of 10 years and 80% attheend of 25years. 9.The power output of individual PV modules used in the PV array, under STC: minimum 300Wp. Necessary test certificates also to be supplied. For detail information please see Cl.no. 2.1 of technical specification For 1HP Off-grid Solar Water Pumping System with Monocrystalline /Monocrystalline PERC/ bifacial SPV modules - 900 - 1200 Wp.
1200
32
38748
... More
Display Board
1
758
758
... More
Module Mounting Structure (For 1HP, 2HP, 3HP, 5HP and 10HP Solar Water Pumping System): Supply, transportation & installation of G.I manualtracking/ Fixed structure made of MS hollow sections,pipes,plates,anglesetcasperIS:4923,IS:1161/1239, IS:1079/2062, to hold min 300 Wp SPV Module as per drawing and technical specification. The steel structure is to be protected with minimum 80 micron galvanisation (hotdip) and provided with fixed arrangement or dual axis manual tracking arrangement for three times in a day and seasonal tilting to face the sun optimally.
150
157
23550
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Murshidabad, West Bengal