Chittaranjan National Cancer Institute Tender

Repair to plaster of thickness 12mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modified self curing mortar, including disposal of rubbish, all complete as per the direction of Engineer-In-Charge. (No scaffolding charges shall be paid extra)

Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. (No scaffolding charges shall be paid extra)

Wall painting with High washable acrylic emulsion paint of approved brand and manufacture to give an even shade : Two coats (Asian/Berger)

P/A crack filling and waterproofing works on the external walls of building which include the following steps: 1) Erecting Scaffolding / use gondola/ spider jhula for covering the entire height of the building as instructed by CNCI representative / EIC. 2) Cleaning the surface with air jet/ water pressure to remove all dust /dirt and remove the peeled off paint layer to make the surface intact. 3) Identify the cracks developed on the walls, widen the major cracks (more than 1mm thick) by cutting in V shape using angle grinder and filling them with polymer based crack filling material of Dr. Fixit/Fosroc/Equivalent as per manufacturer specifications. 4) Spraying using pressure pump Zycosil+ Zycoprime+ Water solution mixed in the ratio 1:2:17 over the surface in required number of coats till saturation as per manufacturer specification /equivalent product as per manufacturer specifications. 5) The contractor has to observe the effectiveness of the work during the course of monsoon and carry out necessary rectification works if seepages are observed from the treated walls. 6) The rate quoted shall include cost of all materials, labour, rent for scaffolding/jhulla, pressure pump etc and contractor profit and overheads.

Providing and layng rectified glazed ceramic floor tiles of size 300X300 mm at dismantled area as per direction of engineer in charge.