Bidhan Chandra Krishi Viswavidyalaya Tender

Cathode Ray Oscilloscope (CRO): Bandwidth : 70MHz or more Sample Rate (Each Channel) : Minimum 1GS/s Real Time on each Channels Channels : 2 Display : Minimum 7 inch, Active TFT Color Display Zoom : Oscilloscope should be able to horizontally and vertically expand or Compress live or stopped Waveforms Frequency Counter : should have built-in dual channel 10 Hz to 70 MHz Frequency Counter FFT : FFT function should be capable of showing both Time domain and Frequency domain signals simultaneously Trend plot: Should be available to plot Measurement values over long period of Time. Limit Test : should be available to provide quick Pass/Fail comparison between an input Signal and user defined Template Data Logger : Oscilloscope should have built-in Data Logging facility to save user Specified triggered waveforms to a USB device Storage memory : must be available for waveform storage in USB Flash drive Input / Output Ports: USB host port on front panel for flash drives and USB device on back Panel for PC connectivity and Printers. Accessories : should be supplied with 2 Nos. 100MHz Oscilloscope Probes, Operating Manual, Software for PC connectivity, USB Cables, Power Cord and any other standard Accessories

iMac Desktop: 21.5 inch, 2.3 GHz Dual core Intel Core i5 (7th Generation), 1TB HDD, 8GB DDR4 RAM (1 Year onsite warranty).

Function Generator: 60 MHz, 2 Channel , Arbitrary Function Generator Built-in waveforms: Must have Sine, Square, Pulse, Ramp, Noise, and other frequently used arbitrary waveforms Frequency range : Minimum 1 µHz to 60 MHz Sine wave, Minimum 1 µHz to 30 MHz Square Wave and Pulse waveforms Amplitude 1mVp-pto 10Vp-pamplitude (≤ 25 MHz Frequency) and 1 mVp-p to 5 Vp-p ( 25 MHz Frequency) Must have 2 Channel independent Output Should have minimum 300 MS/s sampling rate and 14-bit vertical resolution Should have Built-in 200 MHz counter with 6-digit resolution for frequency/period/pulse width/duty cycle measurement Minimum 1Mpoint length of memory for user defined arbitrary waveforms Should be with Built-in Modulation (AM, FM, PM, ASK, FSK, PSK, PWM), Noise Generator, Burst, and Sweep modes Should have minimum 3” color screen displays to display both graphical and numeric waveform information simultaneously