Animal Resources Development Department Tender
... More
Search from over 10,000+ business opportunities that have been announced from the biggest West Bengal tenders, e tender West Bengal, WB government tenders, and the Online Tender Notices posted on West Bengal e tenders to date. Find opportunities that have come in from multiple corporations, West Bengal government departments, State PSUs, and several Private companies from the state.
Animal Resources Development Department - ARD Tender
Civil And Construction
Building Construction
Agriculture or Forestry Works
Eprocure
Opening Date8 May 2025
Closing Date24 May 2025
Tender Amount₹ 27,01,021
Costs
EMD
₹ 54,020Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Modernization Of Existing Building To Establishment Of Corn Silage Production With Bailing System And Tmr At Salboni, District - Paschim Midnapore, Pin - 721147 Under West Bengal Livestock Development Corporation Limited For The Financial Year 25-26.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_ARD_843912_1Bid Award Id
ViewTender No
WBARD/WBLDC/NIT-886e/2025-26 Dated 07/05/2025Tender Authority
Animal Resources Development Department ViewPurchaser Address
-Website
http://https://www.wbard.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
Modernization of existing building to Establishment of Corn Silage Production with Bailing System and TMR at Salboni, District - Paschim Midnapore, Pin - 721147 under West Bengal Livestock Development Corporation Limited for the Financial Year 2025-2026.
The Contractor is to quote the rate on Percentage BOQ format of the components as specified in the BOQ. The percent rate (less or excess from scheduled rate) will be quoted in the BOQ. Rate quoted shall be including GST, Cess, other taxes / all charges
BOQ Items
... More
Surface Dressing of the ground in any kind of soil including removing vegetation inequalities not exceeding 15 cm depth and disposal of the rubbish within a lead upto 75 m as directed.
570
10
5700
... More
(A) Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation withwater, ramming complete including the ost of supply of sand. (payment to be made on measurement of finished quantity)
9.89
375
3710.8269
... More
Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand.
81.25
344
27950
... More
Supplying and laying Polythene Sheet (150gm / sq.m.) over damp proof course or below flooring or roof terracing or in foundation or in foundation trenches.
81.25
24
1950
... More
Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing or concrete slabs, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto roof of ground floor) (f) 25 mm to 30 mm shuttering without staging in foundation
56.72
203
11514.16
... More
Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal ize) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. Pakur variety
18.62
5299
98668.1248
... More
Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. (i) Pakur Variety
63.05
5794
365328.093
... More
Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting o quisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m (i) Tor steel/Mild Steel ii) JSW/JSPL/SHYAM/SRMB/BMASL etc.
1.05
54375
57094.317
... More
Labour for Chipping of concrete surface before taking up Plastering work.
171.35
21
3598.35
... More
Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour In ground floor. 3 mm. thick topping (High olishing grinding on this item is not permitted with ordinary cement). Using grey cement (iii) 35 mm. thick
68.8
330
22704
... More
Stripping off worn out plaster and raking outjoints of walls, celings etc. upto any height and inany floor including removing rubbish within alead of 75m as directed.
622.29
19
11823.509999999998
... More
Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course,scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](ii) With 1:4 cement mortar (a) 20 mm thick plaster
359
174
62466
... More
(b) 15 mm thick plaster
495
152
75240
... More
(c) 10 mm thick plaster
118.29
123
14549.67
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m. (ii) Other than Coloured decorative including white
13.6
694
9438.4
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (B) Wall
With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (a) Area of each tile upto 0.09 Sq.m (ii) Other than Coloured decorative including white
76.68
699
53599.32000000001
... More
Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. (A) Floor
With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. (b) Area of each tile above 0.09 Sq.m. (i) Coloured decorative
204.84
901
184560.84
... More
Supplying, fitting and fixing Black Stone slab used in Kitchen
slab, alcove, wardrobe etc. laid and jointed with necessary
adhesive Cement mortar (1:2) including grinding or polishing
as per direction of Engineer-in -Charge in Ground Floor.
(a) Slab Thickness 20 to 25 mm
23.5
643
15110.5
... More
Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping nd preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor)(a) One Coat i) Water based interior grade Acrylic Primer
613.29
30
18889.332
... More
Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) i) Standard Quality
613.29
62
38023.979999999996
... More
Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the
EIC. In Ground Floor: (a) One Coat
359
31
11272.6
... More
Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer's specification and as per direction of Engineer-in-Charge to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. In Ground floor (Two Coat)
a) Normal Acrylic Emulsion
359
67
24053
... More
Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
39.44
29
1143.76
... More
Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With other than hi-gloss of approved quality- iv) Two coats (with any shade except white)
39.44
72
2839.68
... More
Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). (d) Sal : Local. In Ground Floor
1.54
72954
112349.16
... More
Supplying, fitting & fixing fibre reinforced polymer (FRP) Composite door shutters as per approved design with glass fibre reinforced plastic moulded skins and a special sandwich core, so as to impart monolitaheic composite structure as per approved technology of Department of Science and Technology (DST) to satisfy IS:4020 door testing performance criteria. In ground floor. (ii) 25 mm thick
6.62
2581
17086.22
... More
(b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc.
41.35
38
1571.3
... More
(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (a) On timber or plastered surface : With other than hi-gloss of approved quality-(iv) Two coats (with any shade except white)
41.35
75
3101.25
... More
Repairing crack in wall by cement grouting (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) and finishing off to match with adjacent surface. (Cement-69 Kg/100 m)
219.2
13
2873.7119999999995
... More
Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, maruti lock, screws etc. including labour charges for fitting & fixing of aluminium 2-track/3 track sliding window with fixing of glass (excluding cost of glass) all complete as per architectural drawings and direction of Engineer-in-charge. 10-12 Micron thickness Annodizing film. Natural white
209.6
448
93900.8
... More
(a) M.S.or W.I. Ornamental grill of approved design joints continuously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. (i) Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr.
3.1
9888
30652.8
... More
Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. ii) 4mm thick coloured / tinted / smoke glass.
27.48
468
12860.64
... More
(b) Applying 2 coats of Non-Toxic Acrylic Polymer modified Paint having adhesive & waterproofing properties by mixing in proportion (1 liquid: 4 cementitious material) or as per manufacturer's specification for water proofing layer in water tank etc. (No Departmental Cement is required)
279.66
257
71872.62000000001
... More
Cleaning the exposed corroded Reinforcement as well as worn out concrete by sand blasting with air compressor including all materials, hire charges of machineries and labour etc. all complete as per technical specification and direction of the Engineer-in-Charge.
88.24
604
53296.96
... More
Guniting concrete surface with cement mortar (25 mm nominal thick) applied with compressor after cleaning surface and spraying with epoxy complete as per Technical specification.
103.55
912
94437.59999999999
... More
Cleaning the exposed reinforcement preferably upto full diameter by wire brush, applying two coats of polymer based rust removing compound left for 24 hours, removing the coating and then applying two (2) coats of polymer modified anti corrosive protective coating formulated to inhibit the corrosion of reinforcement as per manufacturer's specification]
66.22
785
51982.7
... More
(a) Applying epoxy based reactive joining agent for joining the old concrete with fresh concrete to be applied within manufacturer's specified time as per manufacturers specification.
216.9
309
67022.1
... More
Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete.
(i) 250mm x 16mm dia bolt.
16
233
3728
... More
Anodised aluminium butt hinges of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 205/66) and fitted and fixed with cadmium plated screws: (iii) 75 x 45 x 2.5mm.
64
52
3328
... More
Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: (a) With continuous plate base (Hexagonal/ Round rod)
(a) With continuous plate base (Hexagonal/ Round rod). (v) 125 mm grip x 12 mm dia rod.
14
103
1442
... More
Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. (b) 250 mm long
28
67
1876
... More
Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc.
(a) With 'P' trap
5
1421
7105
... More
Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc.
5
1015
5075
... More
Supplying, fitting and fixing Flat back urinal (half stall urinal) in white vitreous chinaware of approved make in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. (i) 635 mm X 395 mm X 420 mm
5
2869
14345
... More
Supplying, fitting and fixing shower of approved brand and make. (f) Hand Shower(Health Faucet) with 1mtr Fexible Tube with Wall Hook(Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar).
5
1251
6255
... More
Supplying, fitting and fixing shower of approved brand and make.
(a) (i) Chromium plated round shower with revolving joint 100 mm dia with rubid cleaning system (Equivalent to Code No. 542(N) & Model - Tropical / Sumthing Special of ESSCO or similar brand).
5
452
2260
... More
Supplying, fitting and fixing bib cock or stop cock. (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand).
10
539
5390
... More
Supplying, fitting and fixing 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand).
5
811
4055
... More
Supplying, fitting and fixing bib cock or stop cock. (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) &
513(B) & Model - Tropical / Sumthing Special of ESSCO or similar
16
493
7888
... More
Supplying, fitting and fixing white vitreous china best quality approved make wash basin with C.I. brackets on 75 mm X 75 mm wooden blocks, C.P. waste fittings of 32 mm dia., one approved quality brass C.P. pillar cock of 15 mm dia., C.P. chain with rubber plug of 30 mm dia., approved quality P.V.C. waste pipe with C.P. nut 32 mm dia., 900 mm long approved quality P.V.C. connection pipe with heavy brass C.P. nut including mending good all damages and painting the brackets with two coats of approved paint.
(ii) 550 mm X 400 mm size
6
2208
13248
... More
Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (a) Sink only (i) 530 mm X 430 mm x 180 mm
5
3285
16425
... More
Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads,fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately). (a) For Exposed Work PVC Pipes - Dia 25mm
45
177
7965
... More
(a) For Exposed Work PVC Pipes - Dia 15mm
108.4
101
10948.400000000001
... More
(a) For Exposed Work PVC Pipes - Dia 20mm
71.7
129
9249.300000000001
... More
Supplying, fitting and fixing towel rail with two brackets. (b) Aluminium (ii) 25 mm dia. and 600 mm long
5
164
820
... More
Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer (b) 1000 litre capacity
3
5128
15384
... More
Labour for hoisting plastic water storage tank.
(i) Upto 1500 litre capacity.
(a) Upto 1st story from G.L.
3
96
288
... More
Labour for punching hole in plastic water storage tank upto 50 mm dia.
6
19
114
... More
Construction of septic tank of different capacities as per approved drawing with 1st class brick work in cement mortar (1:4) including two 560 mm dia. R.C.C. manhole cover(heavy type)of approved make supplied, fitted and fixed in the 100mm thick R.C.C (1:1.5:3) top slab with necessary fittings, 20mm thick cement plaster (4 : 1) with neat cement finish to the internal surfaces and 15 mm thick cement plaster (4 : 1) to outside wall upto 200 mm below G.L floor finished with 25 mm thick grey artificial stone over 100 mm thick R.C.C(1:1.5:3) bottom slab including supplying, fitting and fixing all necessry specials, fittings, S.W. tees, C.I. foot rest etc. including excavation earth in all sorts of soil, shoring, bailing out and pumping out water as necessary, ramming, dressing the bed and fefilling the sides of the tanks with earth, removing spoils, filling up the chamber with clear water, removing foreign materials from the chamber and including constructing attached inspection pit as per approved drawing and connecting all necessary pipes, joints etc. with internal plaster work and artificial stone flooring is to be done with admixture of water proofing compound @ 0.5% by weight of cement with all costs of labour and materials. Note:- (i) Finished level of Septic Tank should be 400 mm. from Ground Level. (ii) Height of 50 mm. Ventilation pipe &Mosquito proof mesh, should be follwed as per IS:2470,Part-I. Payment will be made separetly on the basis of actual height based on relevant I.S.Code. (iv) For 50 users. A) With Pakur variety. (Other than SAIL/TATA/RINL)
1
88728
88728
... More
Construction of Sub Base using Local Materials, spreading in uniform layers with Motor grader on prepared surface, including screening the metal as necessary, mixing by mix in place method with Rotavator at OMC, and compacting with vibratory roller to achieve the desired density, lighting, guarding and barricading including cost and carriage of all materials and making necessary earthen bundh of one metre wide on each side to protect the edges complete as per Clause 401 of Specifications for Road & Bridge Works of MoRT&H (5th Revision). (i) For Construction of Sub Base by compacting 1st class brick aggregates (40 mm down) and sand (in proportion of 60:40).
40.21
1732
69667.04179999999
... More
Supplying, fitting & fixing UPVC pipes A- Type and fittings conforming to IS:13592-1992 with all necessary clamps nails, including making holes in walls, floor etc. cutting trenches in any soil through masonry concrete structures etc if necessary and mending good damages including joining with jointing materails (Spun Yarn, Valamoid/Bitumen/M-Seal etc) complete. A) UPVC Pipes: (ii) 110 mm. Dia.
54.8
251
13754.8
... More
B) UPVC Fittings: a) Plain Tee (ii) 110 mm. Dia.
11
172
1892
... More
B) UPVC Fittings: b) Plain Y (ii) 110 mm. Dia.
10
223
2230
... More
B) UPVC Fittings: c) Bend 87.5 degree (ii) 110 mm. Dia.
8
160
1280
... More
B) UPVC Fittings: d) Shoe (ii) 110 mm. Dia.
8
111
888
... More
Excavation of soil for installation of Earth Electrode and filling & ramming. For Morrum Soil PWD SoR Item - 1.b Page - G1
8
294
2356.64
... More
Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts.
long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia
x 80 mm long GI bolts, double nuts, double washers incl. S &
F 15 mm dia GI pipe protection (1 Mts. long) to be filled with
bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: By TATA-Medium GI pipe PWD SoR Item - 2.a Page - G1
8
1569
12557.76
... More
Extra for providing masonery enclosure on the top of the earth
electrode of overall size 86.36 cm x 86.36 cm x 46 cm deep
(below Ground level) complete with cemented brick work(1:6)
of 25 cm width duly plastered with cement morter (inside) CI
hinged inspection cover of size 36.56 cm x 35.56 cm with
locking arrangement, GI reducer including drilling of 46 nos.
12 mm dia holes on the GI pipe PWD SoR Item - 3.a Page - G-2
8
942
7539.6
... More
Extra for treatment of soil by using salt & charcoal or coke for
plate electrode PWD SoR Item - 3.b Page - G-2
8
546
4375.44
... More
Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat
50 mm x 6 mm on wall having clearance of 6 mm from wall
including providing drilled holes on the busbar complete with
GI bolts, nuts, washers, spacing insulators etc. as required PWD SoR Item - 4.c Page - G-2
8
222
1779.84
... More
Connecting the equipments body to earth busbar incl. S & F
50 mm x 6 mm Galvanized (Hot Dip) MS flat on wall/floor with
GI saddle as required and connection to equipments with incl.
drilling holes, bolts, nuts,washers etc. PWD SoR Item - 5.e Page - G-3
94.25
203
19221.345
... More
Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as required. 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC PWD SoR Item - 1.a Page - E-14
50
122
6128.5
... More
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core
stranded 'FR' PVC insulated & unsheathed copper wire
(Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'
(Precision make), with 1x22/0.3 (1.5 sqmm) single core
stranded 'FR' PVC insulated & unsheathed copper wire for
ECC, to light/fan/call bell points with Piano Key type switch
fixed on MS CRC sheet metal (16 SWG) switch board cum
JB on wall complete with 2 no. suitable size “Ph & N” copper
bar incl. bakelite/Perspex (wall matching color) top cover 3
mm thick and incl. 175mmx100mmx65mm inspection box,
making earthing attachment, painting the MS box and
mending good the damages to original finish Average run 8 mtr PWD SoR Item - 2.c Page - E-14
30
874
26234.100000000002
... More
Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core
stranded 'FR' PVC insulated & unsheathed copper wire
(Brand approved by EIC) in 20mm size PVC rigid conduit 'FR'
(Precision make), with 1x22/0.3 (1.5 sqmm) single core
stranded 'FR' PVC insulated & unsheathed copper wire for
ECC, to light/fan/call bell points with Piano Key type switch
fixed on MS CRC sheet metal (16 SWG) switch board cum
JB on wall complete with 2 no. suitable size “Ph & N” copper
bar incl. bakelite/Perspex (wall matching color) top cover 3
mm thick and incl. 175mmx100mmx65mm inspection box,
making earthing attachment, painting the MS box and
mending good the damages to original finish Average run 9 mtr PWD SoR Item - 2.d Page - E-14
30
955
28675.2
... More
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection. 40 A Legrand FP
6
1884
11309.400000000001
... More
Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection.6-32 A Legrand DP
16
562
8998.08
... More
Supply and fixing of smart bright essential street light (70 Wafl) complete with all accessories to be fixed /projected from the wall of the building or on pole incl. making holes/ providing clamping arrangement & necy. GI reducer as required. S&F 40 mm GI pipe (ISI-Medium) quality 1.5 mts. average length having suitable bend S&F necy. length of 1.5 sqmm PVC insulated single core stranded annealed copper wire and making connections as required and mending good damages to wall incl. painting etc. 70 watt
12
6404
76854.48
... More
TAXES & DUTIES
-
-
-
... More
Add : G.S.T. @ 18% of Rs. 22,66,337=81 i.e. Rs. 4,07,940=81
1
407940
407940.81
... More
Add : CESS @ 1% of Rs. 26,74,278=62 i.e. Rs. 26,742=79
1
26742
26742.79
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements