Water Proofing Tenders

Description: Dismantling old and damaged cement concrere including cost of all labour T&P etc. complete in all respects , Dismantling old and damaged Brick Work including cost of all labour T&P etc. complete in all respects , Scraping old white or colour wash including disposal of refuse as directed by the Engineer in charge with in a distance of 60 meters., Supplying & Placing of Murga Jali on roof including cost of all material, labour T&P etc. complete in all respects, Cement Concrete 1 1.5 3 Over murga jali on roof with water proffing compound including cost of all material, labour T&P etc. complete in all respects, Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm. And under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including diposal of rubbish to the dumping ground all complete as per direction of Engineer in charge with cement mortar 1 4 (1 cement 4 coarse sand), Providinding and applying white cement based putty of average thickness 1 mm,of approved brand and manufacture, over the plastered wall surface to preparethe surface even smooth complete., Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work. etc. including cost of materials, labour,T&P complete in all respects, Finshing walls with premium accrylic smooth exterior paint with silicon addetives of required shade old work over existing cement paint surface. etc. including cost of materials, labour,T&P complete in all respects, Providing and laying vitrified floor tiles in size 600mmx 600mm of approved make including joint filled with white cement etc. including cost of materials, labour,T&P complete in all respects , Renewal old putty of glass pans etc. including cost of materials, labour,T&P complete in all respects , Renewing glass pannes, with putty and nails whereever necessary including racking out the old putty. Float glass panns of nominal thickness 4 mm etc. including cost of materials, labour,T&P complete in all respects , Painting and Varnishing on iron works in small area approved suprior quality ready mixed paint of clear synthetic varnish including supply of material, labour and T&P etc for proper completion of work. , Dismantling of W.C pan of all size etc. including cost of materials, labour,T&P complete in all respects , Dismantling of tile work laid down cement mortar including upto 50 meter disposal including cost of all material, labour T&P etc. complete in all respects, Providing and laying ceremic glazed Floor Tiles of size 300x300 mm of Ist quality of approved make in colours laid on 20 mm thick cement mortor 1 4 jonting including the joint filling with white cement. including cost of all material, labour T&P etc. complete in all respects, Providing and fixing White Vitreous China Wall Mouting Water Closet squating pan (European type 780x370x690m pan) with low level white PVC flushig system, including flus pipe manually control device (handle lever) with all fitting and fixture complete, including cutting making wood the wall and floors wherver required.including cost of all material, labour T&P etc. complete in all respects , PVC Wall Panelling hot stamping and lamination,water proof ,temper proof on walls and celling etc including cost of materials, labour,T&P complete in all respects , Providing & Fixing 15mm Dia CPVC Pipes including cost of materials, labour,T&P complete in all respects., Providing & Fixing 15 mm Dia C.P. Brass Bib Cock including cost of materials, labour,T&P complete in all respects., Providing & Fixing 15 mm Dia C.P. Brass Stop Cock including cost of materials, labour,T&P complete in all respects. , Providing & Fixing 15 mm Dia C.P. Brass Angle Valve including cost of materials, labour,T&P complete in all respects., Providing & Fixing Wash Basin including cost of materials, labour,T&P complete in all respects., Providing & Fixing P.V.C. waste Pipe for wash basin including cost of materials, labour,T&P complete in all respects., Wiring point for light with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core cable Earth etc complete in all respects. , Wiring point for fan with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core cable etc complete in all respects. , Wiring point for Plug with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core etc complete in all respects. , Wiring point for call bell with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core etc complete in all respects.

Description: BOQ ITEMS: Toner Cartridge for printer Laser Jet MFP M438 nda (335S), Pencil cell model A, Pencil cell model 23A 12V, Vegitable basket 5 kgs cap with Lid, Vegitable basket 5 kgs cap without Lid, Umbrella large size, Cotton Rope 8 mm for tent , Heat Piller 1500 W, Pedestral Fan, Broom Phool (Jadu), Temperature and Humidity meter, Rain measuring cylinder, Precast concrete pillar for fixing of station point, TBM, RL and Centre line, Tarpaulin HDPE heavy duty 18 feet x 24 feet 2mm thick edges binded , Tarpaulin HDPE heavy duty 24 feet x 24 feet 2mm thick edges binded, Tape metalliic 30 mtr length, Mason thread (Cotton only), Paint synthetic enamel white, Painting brush 4 inch, Writing brush 1 inch, MS wire nails 17 Gauge 2 inch long, Safety Jacket, Dah Iron 10 inch with handle, S K Oil stove 1.5 ltrs (04 burner), Tea container Stainless Steeel 5 ltrs cap, Tiffin carrier 04 container , Lime unslacked, Hand gloves, Computer Window 10 Pro intel (R) Core(TM) i5 CPU 10000 8 GB RAM 1TB HDD 24 Inches Monitor, Colour Printer (HP Office Jet Pro 9720), UPS Champion KVA 150/61500 BAH, Computer chair revolving, Plastic chair with Arms, Plotter paper roll (45 Mtrs long), Photostat paper A4 size, Photostat paper A3 size, Photostat paper legal size, Printer cartridge HP laser Jet P1020 plus, Refill Ink for Epson L3210 colour printer (black, yellow, cyan, Magenta), Deep Freezer, Almirah steel medium size, Food serving counter 6 feet long, Shamiyana water proof size 30 feet x 30 feet with all accessories, Electric press heavy duty, Microwave oven, Sofa Set, CCTV Camera with all accessories, Work Station 06 Cabin (03 cabin each side), Pre Painted CGI Sheets of size 10 feet x 4 feet, Liner Sheets of size 10 feet x 3 feet for wall both side & back side, PGI Sheets of size 10 feet x 4 feet, MS Squire pipe 3 inch x 3 inch vertical post, MS Pipe 50 mm dia x 06 mtr, Paint red Oxide, Welding Rod 3.5 mm dia, Screw, Work Station 04 Cabin for Main Office, Quick Setting Compound, Steel Jerricane 20 Ltrs cap, Water Storage Tank 1000 Ltrs cap, Water Storage Tank 1500 Ltrs cap, Water Storage Tank 2000 Ltrs cap, Water Storage Tank 500 Ltrs cap, Water Storage Tank 200 Ltrs cap, HDPE Barrels 200/210 Ltrs cap, Paint Synthetic Enamel Grey, Paint Synthetic Enamel Olive Green, Paint Synthetic Enamel P O Red, Paint Epoxy Red with Hardener, Base paint Grey, Paint Synthetic Enamel Yellow, Paint Synthetic Enamel Black, Paint Epoxy White with Hardener, Paint Epoxy Red with Hardener, Paint Terracotta Red, Thinner, Paint Synthetic Enamel White, Distemper White, Paint Red Oxide, Thermoplastic Paint White for Road Marking as per IS 164 1981, PVC Switch Board 8 inch x 4 inch, Socket with Switch 16 Amp, Socket with Switch 6 Amp, PVC Copper Wire 2 Sqm 90 mtr Roll, PVC Copper Wire 1.5 Sqm 90 mtr Roll, PVC Copper Wire 1 Sqm 90 mtr Roll, Insulation Tape 20 mm width 25 Mtr length, Led Tube Light 2 feet Long 20 W complete set, Almirah Double door small Size, Dust Bin 20 Ltrs Cap plastic, Besrah Niwar Black Rubber Door Mat, Turkey Cotton Towel White small for wash Room, LT Wire 6 MM 25 Mtr roll, LT Wire 4 MM 25 Mtr roll, LT Wire 2.5 MM 25 Mtr roll, LT Wire 2 MM 25 Mtr roll, LT Wire 1.5 MM 25 Mtr roll, LT Wire 1 MM 25 Mtr roll, LT Wire 0.75 MM 25 Mtr roll, Charpoy Bed with Ply top 6 feet 6 inch x 3 feet 6 inch, Mattress 6 feet 6 inch x 3 feet 6 inch, Dining Table wooden 6 seater for offr, Dining Table wooden 6 seater for JCO, Dining Table wooden normal 6 seater for ORs, Dining Chair wooden, Dining Chair plastic, RO Plant 50 L/Hr Cap, Executive Table for OC big, Executive Table for Offr Normal, Executive Chair for OC, Executive Chair for Offr Normal, Office Table Normal, Office Chair Non revolving, Almirah Steel Large size 78 inch x 36 inch x 19 inch, Visitors Chair, Heat Pillar 1500 W, Sofa Set (05 seater)

Details: Description:- Supply, Installation, Testing, And Commissioning Of Exterior Bis Registered 36w 24v Dc Rgbw linear Led Wall Washer Luminaire For Facade Lighting With Extruded Aluminum Housing, Powder-coated Finish, And clear Toughened Glass. With All Leds On, Minimum System Lumen Efficacy Equal To Or Greater Than 62.9 Lm/w. the Luminaire Shall Be Capable Of Producing Dynamic Color-changing Light With 16 Million Colors As The Light Fixture should Be Programmable Using 8-bit Control Dmx512 Protocol / Ethernet-based Control. The Luminaire Should Be complete With A Dedicated Lens Made Up Of Ul/vde Approved Pc For Each Led, Offering Beam Angle Of Different types Such As Narrow, Medium, Wide, Or Elliptical As Per The Site Requirement. The Fixture Should Be Erected With the Necessary Required Brackets And Should Have Constant Locking Hinges For Simple Position Control From Various angles Without Special Tools. The Fixture Shall Be Suitable To Operate At An Ambient Temperature Range Of -30°c To 50°c And The Complete Luminaire Shall Be Ip66 And Ik07 Rated. Led Life Time Shall Be At Least L70@ 25c @ 50000burninghoursat25°c.ledshouldbeofnichia/osram/seoul/philips/ lumileds/cree/lednium/avago Make. The Product Should Be Bis Approved With R Number Mentioned On product Label. To Be Supported With Product Test Reports - Lm79, Bis Report And Leds Test Reports. Luminaire shall Be Conforming To Bis I.e. Is 10322 (part 5/sec 5) And Shall Be Complete With All Necessary Accessories required For Proper Working Of Fixture Including Weather Proof Connection Cables, Water Proof Connectors Etc. As required. This Includes Crane Charges If Any For Height Work.(warranty Period Of 5 Years). All Test Reports And technical Data Sheets To Be Submitted To The Competent Authority For Approval. After Installation, Assembling And commissioning Contractor Should Ensure That All Parts Of The Light Are Properly Fixed And Put It Into Running condition. The Entire Work Should Be Carried Out As Per The Instructions Of Site Engineer. Testing Of The Fixtures To be Done In The Presence Of Site Engineer For A Minimum Period Of 1 Week.

Details: Description:- Supply, Installation, Testing, And Commissioning Of Exterior Bis Registered 24w 24v Dc Rgbw linear Led Wall Washer Luminaire For Facade Lighting With Extruded Aluminum Housing, Powder-coated Finish, And clear Toughened Glass. With All Leds On, Minimum System Lumen Efficacy Equal To Or Greater Than 62.9 Lm/w.the luminaire Shall Be Capable Of Producing Dynamic Color-changing Light With 16 Million Colors As The Light Fixture should Be Programmable Using 8-bit Control Dmx512 Protocol / Ethernet Based Control. Luminaire Should Be complete With A Dedicated Lens Made Up Of Ul/vde Approved Pc For Each Led, Offering Beam Angle Of Different types Such As Narrow, Medium, Wide Or Elliptical As Per The Site Requirement. The Fixture Should Be Erected With the Necessary Required Brackets And Should Have Constant Locking Hinges For Simple Position Control From Various angles Without Special Tools. Fixture Shall Be Suitable To Operate At An Ambient Temperature Range Of -30°c To 50°c And Complete Luminaire Shall Be Ip66 And Ik07 Rated. Led Life Time Shall Be At Least L70@ 25c @ 50000 burning Hours At 25°c. Led Should Be Of Nichia/osram/seoul/philips/ Lumileds /cree /lednium / avago Make. The Product Should Be Bis Approved With R Number Mentioned On Product Label. To Be Supported with Product Test Reports - Lm79, Bis Report And Leds Test Reports. Luminaire Shall Be Conforming To Bis I.e. is10322 (part 5/sec 5) And Shall Be Complete With All Necessary Accessories Required For Proper Working Of Fixture including Weather Proof Connection Cables, Water Proof Connectors Etc. As Required. This Includes Crane Charges if Any For Height Work. (warranty Period Of 5 Years). All Test Reports And Technical Data Sheets To Be Submitted To the Competent Authority For Approval. After Installation, Assembling And Commissioning Contractor Should Ensure that All Parts Of The Light Are Properly Fixed And Put It Into Running Condition. The Entire Work Should Be Carried Out as Per The Instructions Of Site Engineer. Testing Of The Fixtures To Be Done In The Presence Of Site Engineer For A minimum Period Of 1 Week

Details: All The Extinguishers Shall Be Kept In Healthy Working Condition.check And Inspect The Condition / Operational Readiness Of Fire Extinguishers.check And Inspect Expiry Date On Fire Extinguishers.empty Cylinders And Expired Cylinders Shall Be Segregated And Listed For Refilling.carry Out The Refilling Works Of Co2,mechanical Foam,water Co2 And Abc Fire Extinguishers For Those Cylinders Which Are Empty And Crossed Expiry Date With Approval From Enginer In-charge And All Refilling Works Of Mechanical Foam,water Co2 And Dcp Shall Be Carried Out At Bhadra Generating Station Itself. Refilling Of Co2 And Abc Fire Extinguishers Shall Be Carried Out At Firm Works And Refilled Cylinders Shall Be Brought Back And Installed Within 07 Days.all Defective And Damaged Parts / Spares Of The Fire Extinguishers Shall Be Listed And Submitted. Such Damaged Parts / Spares Shall Be Supplied And Replaced With Approval From Engineer In-charge Within Reasonable Time. Check / Inspect And List Out Defective Fire Extinguishers And Issue Condemnation Certificate.carryout The Pressure Testing Of Water Co2, Mechanical Foam, Dcp, Abc And Co2 Type Fire Extinguishers Once In The Contract Period.carry Out Quarterly Over All Supervision And Maintenance Of The Fire Extinguishers System In A Year And Label The Cylinders For Healthiness And Next Due Date Of Maintenance. Water Proof Labels / Covers Shall Be Used For Outdoor Fire Extinguishers. Refilling / Recharging Shall Be Carried Out Using Quality Materials Only. The Spare For Fire Extinguishers Parts Shall Be Supplied By Kpcl.there Are 06 Fire Hydrant Points At Left Bank Power House And 02 Fire Hydrant Points At Right Bank Power House Of Bhadra Generating Station.carry Out Quarterly Over All Supervision And Maintenance Of The Fire Hydrant Systems In A Year And Report Shall Be Submitted For Healthiness Of The System. Carry Out Checks Of All The Fire Hydrants For Its Operational Readiness.checking Of Pipelines, Valves, Nozzles, Hoses, Hose Reel Drums And Couplings For Healthy Condition. Any Abnormalities In The System Shall Be Rectified With Approval From Engineer In-charge.the Firm Has To Conduct Fire Fighting Training In Theory, Practical And Panic Mock Drill Once In A Year. The Training Program Shall Be Conducted At Bhadra Generating Station. Time And Date Of The Training Program Shall Be Decided And Intimated By Engineer In-charge.

Details: Multi Positioning Portable Maintenance Lamp With Dual Mounting System ( powerful Magnetic + Normal Base For Floor Operation.) Fitted With 36 Watt Led Cob ( make Cree Or Similar) Hsn Code - 8413 Fitted With Battery Low Indicator . Fitted With Bis C ertified Powerful Lithium Battery (lasting Continuous Glowing 7-8 Hrs 24v, 14000 Mah. provided With Electric Charger. Make/brand - Om Energy Savers Or Similar.[ Technical S pecifications :- (1) Light Source :- Smd Led . (2) Light Power :- 36 Watt, 4000 Lumens. (3) Le d Type :- Smd Led Cluster .(4) Light Spectrum Colour :- White : 6000 Digree K Approx. (5) radiation Angle :- > 90 Digree. (6) Heat Dissipation Method :- Aluminium Diecast Fixture back With Fins . (7) Battery Type :- Lithium Ion. Bis Certified . (8) System Voltage :- 24v Sy stem .(9) Battery Certification :- Bis Certified Battery (govt. Of India) . (10)battery Ove r Charge Protection :-.(11)battery Deep Discharge Protection (12) Battery Short Cir cuit Protection (13) Thermal Cut-off Protection (14) Charging Type :- Electric.(15)cha tging Time :- 5-6 Hours Approx. (16) Backup Time /run Time :- High Mode : 7 To 8 Hours Med mode : 15 To 16 Hours . (17) Battery Low Indicator :- Provided + Buzzer Beep Warning. (1 8) Operating Modes :- High Mode, Mid Mode .(19) Rubber / Silicon Gasket :- Provided For water & Dust Resistance.(20)toughened Glass .(21) Sturdy Aluminium Enclosure (22) In gress Protection :- Ip65. (23) Single Switch Operation With One Additional Main Power switch Water Proof Switch .(24) Water Proff Switch 25)power Ful Magnet With Non -m agnetic Isolation Disc Capable Of Complete Weight. (26) Dual Mounting System :- (a) Ma gnetic Surface Mounting Capability (b) Base H Stand Mounting Capability. (27) Carry H andle With Cushioning For Carry Comfort.(28) Powder Coated Ms Base Stand & Carry handle . (29) Warranty :- 1 Year

Details: Ldl Cholestrol With Calibrator,2x30m,2x10ml , Hba1c With Calibrator Set,2x15ml,2x5ml , Xl Multical,4x3ml , Autowash, Ac,al, 5x4ml , Autowash Kit,10x100ml , Erba Norm Kit , Erba Path Kit , Urea 5x22ml,5x 6point8ml , Micro Albumin With Calibrator 1x5ml,2x25ml , Calcium 5x6ml , Creatinine,jaffes,5x44ml,5x11ml , Glucose,10x44ml , Triglycerides ,5x11ml,5x4ml , Cholesterol,5x11ml , Hdl Cholestrol With Calibrator, 4x30ml,4x10ml , Erba Norm 4x5ml , Erba Path 4x5ml , Multical 4x3ml , Erba H3 Control Hematology,qc , Director Ldl R1 2x30,r2 2x10 , Erba 180 Cuveette , Rotar , Erba Wash Solution System Pack 10,100ml , Alkaline Phosphatase R1 2x44,r2 , Sgot R1, 4x35ml,r2 4x18 Point1 Ml , Albumin R1 10x44ml , Direct Hdl R1-4x30ml,r2-4x10ml , Crp R1 1x40ml,rx 1x10ml , Aso 1x22,1.5x5 , Sgpt R1 4x35ml,r2 4x18point1ml , Plate Sealer, 100 Per Pk , Water Proof Temperature And Humidity Data Logger , Anti A,b,c,d Blood Grouping Kit , Anti H Lectin Antisera , Anti A1 Lectin Antisera

Details: Description:- Supply, Installation, Testing, And Commissioning Of Exterior Bis Registered 24w 24v Dc Rgbw linear Led Wall Washer Luminaire For Facade Lighting With Extruded Aluminum Housing, Powder-coated Finish, And clear Toughened Glass. With All Leds On, Minimum System Lumen Efficacy Equal To Or Greater Than 62.9 Lm/w. the Luminaire Shall Be Capable Of Producing Dynamic Color-changing Light With 16 Million Colors As The Light Fixture should Be Programmable Using 8-bit Control Dmx512 Protocol / Ethernet Based Control. Luminaire Should Be complete With A Dedicated Lens Made Up Of Ul/vde Approved Pc For Each Led, Offering Beam Angle Of Different types Such As Narrow, Medium, Wide Or Elliptical As Per The Site Requirement. The Fixture Should Be Erected With the Necessary Required Brackets And Should Have Constant Locking Hinges For Simple Position Control From Various angles Without Special Tools. Fixture Shall Be Suitable To Operate At An Ambient Temperature Range Of -30°c To 50°c And Complete Luminaire Shall Be Ip66 And Ik07 Rated. Led Life Time Shall Be At Least L70@ 25c @ 50000 burning Hours At 25°c. Led Should Be Of Nichia/osram/seoul/philips/ Lumileds/cree/lednium/ Avago make. The Product Should Be Bis Approved With R Number Mentioned On Product Label. To Be Supported With product Test Reports - Lm79, Bis Report And Leds Test Reports. Luminaire Shall Be Conforming To Bis I.e. Is 10322 (part 5/sec 5) And Shall Be Complete With All Necessary Accessories Required For Proper Working Of Fixture including Weather Proof Connection Cables, Water Proof Connectors Etc. As Required. This Includes Crane Charges if Any For Height Work. (warranty Period Of 5 Years). All Test Reports And Technical Data Sheets To Be Submitted To the Competent Authority For Approval. After Installation, Assembling And Commissioning Contractor Should Ensure that All Parts Of The Light Are Properly Fixed And Put It Into Running Condition. The Entire Work Should Be Carried Out as Per The Instructions Of Site Engineer. Testing Of The Fixtures To Be Done In The Presence Of Site Engineer For A minimum Period Of 1 Week.

Details: Description:- Supply, Installation, Testing, And Commissioning Of Exterior Bis Registered 24w 24v Dc Rgbw linear Led Wall Washer Luminaire For Facade Lighting With Extruded Aluminum Housing, Powder-coated Finish, And clear Toughened Glass. With All Leds On, Minimum System Lumen Efficacy Equal To Or Greater Than 62.9 Lm/w. the Luminaire Shall Be Capable Of Producing Dynamic Color-changing Light With 16 Million Colors As The Light Fixture should Be Programmable Using 8-bit Control Dmx512 Protocol / Ethernet Based Control. Luminaire Should Be complete With A Dedicated Lens Made Up Of Ul/vde Approved Pc For Each Led, Offering Beam Angle Of Different types Such As Narrow, Medium, Wide Or Elliptical As Per The Site Requirement. The Fixture Should Be Erected With the Necessary Required Brackets And Should Have Constant Locking Hinges For Simple Position Control From Various angles Without Special Tools. Fixture Shall Be Suitable To Operate At An Ambient Temperature Range Of -30°c To 50°c And Complete Luminaire Shall Be Ip66 And Ik07 Rated. Led Life Time Shall Be At Least L70@ 25c @ 50000 burning Hours At 25°c. Led Should Be Of Nichia/osram/seoul/philips/ Lumileds/cree/lednium/ Avago make. The Product Should Be Bis Approved With R Number Mentioned On Product Label. To Be Supported With product Test Reports - Lm79, Bis Report And Leds Test Reports. Luminaire Shall Be Conforming To Bis I.e. Is 10322 (part 5/sec 5) And Shall Be Complete With All Necessary Accessories Required For Proper Working Of Fixture including Weather Proof Connection Cables, Water Proof Connectors Etc. As Required. This Includes Crane Charges if Any For Height Work. (warranty Period Of 5 Years). All Test Reports And Technical Data Sheets To Be Submitted To the Competent Authority For Approval. After Installation, Assembling And Commissioning Contractor Should Ensure that All Parts Of The Light Are Properly Fixed And Put It Into Running Condition. The Entire Work Should Be Carried Out as Per The Instructions Of Site Engineer. Testing Of The Fixtures To Be Done In The Presence Of Site Engineer For A minimum Period Of 1 Week.

Details: All The Extinguishers Shall Be Kept In Healthy Working Condition.check And Inspect The Condition / Operational Readiness Of Fire Extinguishers.check And Inspect Expiry Date On Fire Extinguishers.empty Cylinders And Expired Cylinders Shall Be Segregated And Listed For Refilling.carry Out The Refilling Works Of Co2,mechanical Foam,water Co2 And Abc Fire Extinguishers For Those Cylinders Which Are Empty And Crossed Expiry Date With Approval From Enginer In-charge And All Refilling Works Of Mechanical Foam,water Co2 And Dcp Shall Be Carried Out At Bhadra Generating Station Itself. Refilling Of Co2 And Abc Fire Extinguishers Shall Be Carried Out At Firm Works And Refilled Cylinders Shall Be Brought Back And Installed Within 07 Days.all Defective And Damaged Parts / Spares Of The Fire Extinguishers Shall Be Listed And Submitted. Such Damaged Parts / Spares Shall Be Supplied And Replaced With Approval From Engineer In-charge Within Reasonable Time. Check / Inspect And List Out Defective Fire Extinguishers And Issue Condemnation Certificate.carryout The Pressure Testing Of Water Co2, Mechanical Foam, Dcp, Abc And Co2 Type Fire Extinguishers Once In The Contract Period.carry Out Quarterly Over All Supervision And Maintenance Of The Fire Extinguishers System In A Year And Label The Cylinders For Healthiness And Next Due Date Of Maintenance. Water Proof Labels / Covers Shall Be Used For Outdoor Fire Extinguishers. Refilling / Recharging Shall Be Carried Out Using Quality Materials Only. The Spare For Fire Extinguishers Parts Shall Be Supplied By Kpcl.there Are 06 Fire Hydrant Points At Left Bank Power House And 02 Fire Hydrant Points At Right Bank Power House Of Bhadra Generating Station.carry Out Quarterly Over All Supervision And Maintenance Of The Fire Hydrant Systems In A Year And Report Shall Be Submitted For Healthiness Of The System. Carry Out Checks Of All The Fire Hydrants For Its Operational Readiness.checking Of Pipelines, Valves, Nozzles, Hoses, Hose Reel Drums And Couplings For Healthy Condition. Any Abnormalities In The System Shall Be Rectified With Approval From Engineer In-charge.the Firm Has To Conduct Fire Fighting Training In Theory, Practical And Panic Mock Drill Once In A Year. The Training Program Shall Be Conducted At Bhadra Generating Station. Time And Date Of The Training Program Shall Be Decided And Intimated By Engineer In-charge.