Water Proofing Tenders

Water Proofing Tenders

Indian Navy Tender

Goods
Furnitures and Fixtures
GEM
South Andaman, Andaman & Nicobar Islands
Description: CATEGORY: Ergonomic Seating arrangement with individual head rest , Solid wood arm chair made of teak wood and applying french polish glossy finish , Aluminium cut hanging light ceiling pendent lamp 6 inch dia with installation , Flooring with non porous material with wooden textured pattern 27 ft x 17 ft , Cupboard with cutlery basket 2 ft x 9 ft x 2.5 ft , Structural type painting on wall 17 ft x 10 ft x 2 nos , Zebra type blinds for UV protection and light control for day and night , Table made with anti termite plywood with 1 mm sunmica pasting over the table , Cladding of walls with designer sticker for good ambience 27 ft x 10 ft x 2 nos , Air crew entertainment screen 60 Hz refresh rate , Wall mounted display cabinet with providing drawer and rack , Contraption unit for leg with bags and 6 foot roller with infrared warming , covection heating machine 360 degree motorized rotisserie capacity 32 ltr , 2 Lane coffee percolator with advanced robust fully automatic , Corner lamp standing brass antique finish gold for placing besides sofa set size 5 ft , Corner mural with water fountain , Moisture proof center table nordic ovl low table , different types of handicraft wall art size 3 x 2ft frame , Temperature control device 18000BTU with installation , LED warm white 800 Lumens
Closing Date3 Oct 2024
Tender AmountRefer Documents 

Indian Army Tender

Goods
Healthcare and Medicine
GEM
Kargil, Ladakh
Description: CATEGORY: Inj Pheneramine Maleate , Iron drops Paediatric containing Ferrous Fumerate 25mg per ml Vit B12 12 point 5mg per ml and Folic Acid 200mg per ml bott of 15ml , IV Cannula Fixater , Ketorolac Tromethamine 0 point 4 percent Eye drops , Labetalol HCl 100 mg Tab , Labetalol HCl 5mg per ml amp of 4ml Inj , Loperamide 2mg Tab , Lotion Sterillium Bott of 500 ml , Lumbo Sacral Belt M or L , Medicated Dressing Band Aid water proof square type , Metformin 500mg Tab , Metoclopramide HCl 5mg per ml 2ml Inj , Metoprolol 50mg Tab , Montelukast 10 mg plus Levocetrizine 5 mg Tab , Multi Vit Inj IV 10 ml with minimum constituents having Thiamine B1 30mg point ml Pyridoxine B6 30mg per ml and B12 Cyanocobalamin0300mcg per ml , Nitrofurontion 100mg Tab , Norfloxacin 0 point 3 percent eye drop , Norfloxacin 400mg Tab , Oint Beclomethazone plus Neomycin , Omeprazole 20mg plus Domperidone 10mg Cap , Ondansetron 2mg per ml 4 ml Inj , Ondansetron 8 mg Tab , Oral Rehydration powder , Permethrin 5 percent Tube of 30 gm , Pheniramine maleate 25mg Tab , Pre and probioticTab , Prednisolone 20 mg Tab , Promethazine HCl 25 mg Tab , Promethazine HCL 2 point 5 percent 25mgm per ml 2 ml Inj , Prochlorperazine 12 point 5mg Inj , Prochlorperazine 5mg Tab , Ramipril 5mg Tab , Ranitidine 150mg Tab , Ranitidine HCl 50 mg 2 ml Inj , Resp Budesonide , Resp Levosalbutamol , Secnidazole 1gm Tab , Syp Amoxycillin 200mg per 5ml plus Clavulanic Acid 28 point 5mg per 5ml in 30 ml bott , Syp Azithromycin200mg bott of 15 ml , Syp Bromhexine Bott of 100 ml , Syp Cetrizine 5mg per 5ml bott of 60 ml , Syp Codien Phosphate 10 mg plus CPM 4mg per 5ml bott of 100 ml , Syp Dicyclomine drops of 15 ml , Syp Disodium Hydrogen Citrate Alkasol , Syp Ibuprofen 100 mg per 5ml Bott of 60 ml , Syp Levo-Salbutamol 1 mg per 5ml bottle of 100 ml , Syp Metronidazole susp 200 mg per 5ml bott of 60 ml , Syp Montelukast 4 mg and Levocetrizine 2 point 5 mg bott of 60 ml , Syp Multivitamin , Syp Norfloxacin 100mg per 5ml bott of 30 ml , Syp Ondansetron 2 mg per 5ml in bott of 30 ml , Syp Paracetamol 125 mg per 5 ml bott of 60 ml , Syp Promethazine 5mg per 5ml bott of 100 ml , Thiocolchicoside 4mg Tab , Tamsulocin 0 point 4mg Tab , Telmisarton 40mg Tab , Terbinafine 1 percent cream Tube of 10 gm , Tranexamic Acid 500 mg per 5ml Inj , Vitamin E 200 mg Cap , Vit D3 60000 U per 1 gm sachet , Zincovit Cap , Green stone for Dental use , MMR Miracle Mix Micron silver for Dental use , Intradental proxaTooth Brush , Self seal sterilization pouch 100 mm X 270 mm for Dental use , Meta pex root canal filling material for Dental use , Dycal Calcium Hydroxide paste , Abgel gelatin sponge size 80x50x10 mm , POP for Dental use , Antiseptic mouth wash bott of 100ml , Cloth Napkin absorbant dental disposable 15x15 cm pack of 500 , Lidocaine or Lignocaine Hcl 2 percent with Adrenaline or epinephrine 1 to 80000 2 ml cart Pack of 50 , Cell Pack of 20 Ltr for Sysmex semi auto hemotology cell counter Model XP 100 , Stromatolyser Bott of 500ml for Sysmex semi auto hemotology cell counter Model XP 100 , Amylase Erba Kit , GGT Kit of 5x6point5ml for semi auto analyser , Glucose Kit of 2x200ml for semi auto analyser , Lipase Kit of R1 1x20ml R2 1x5ml for semi auto analyser , Kits for estimation of SGOT AST 5x20 ml , Kits for estimation of SGPT ALT 5x20 ml , Kits for estimation of Creatinine 4x60 ml , Widal Kit , HCV Rapid , HbSAg Rapid , Uric Acid Kit of 5x20ml for semi auto analyser
Closing Date7 Oct 2024
Tender Amount₹ 3.7 Lac 
This is an estimated amount, exact amount may vary.

Indian Army Tender

Goods
Paints and Enamels
GEM
Bengaluru, Karnataka
Description: CATEGORY: Add Gel Pen Blue , Add Gel Pen Red , Add Gel Pen Black , Refill Add Gel Pen Blue , Refill Add Gel Pen Red , Refill Add Gel Pen Black , Pilot Pen V5 Blue , Pilot Pen V5 Red , Pilot Pen V5 Black , Trimax Acid Free Water Proof Gel Pen Blue , Gel Pen V7 Blue , Gel Pen V7 Red , Gel Pen V7 Black , Gel Pen V5 Blue , Gel Pen V5 Red , Gel Pen V5 Black , Gel Pen V10 Blue , Gel Pen V10 Red , Gel Pen V10 Black , Parker Ink Pen , Ball Pen Blue , Ball Pen Red , Ball Pen Black , Binder Clip 25 mm 12 pieces or pkt , Binder Clip 32 mm 12 pieces or pkt , Binder Clip 41 mm 12 pieces or pkts , Binder Clip 51 mm 12 pieces or pkts , Drawing Pin , Drawing Pin Colour Plastic Coated , U Clip Coloured Plastic 28 mm 100 pieces or pkt , U Clip Gem 35 mm 100 pieces or pkt , Steel Scale 30 cm , Plastic Scale 30 cm , Yellow Dusting Cloth 24 x 24 inch , Eraser , File cover for DO Part II , Writing Pad 100 pages Cloth binded , Writing Pad 80 pages Sprial binded , Paste it pad 2 inch x3 Inch , Stick Not Pad 10inchx7.5 inch , Paper Pin T Shape , Pencil Sharpener , Pencil , Permanent Marker Blue , Permanent Marker Black , Pocker Wooden , Permanent OHP Marker Red , Permanent OHP Marker Black , Permanent OHP Marker Blue , Single Hole Punch Machine , Sketch Pen All Colours , Stamp Pad Small 70 mm x 110 mm , Stamp Pad Big 160 mm x 97 mm , Pad Ink 30 ml , Transparent Tape 0.5inch 60 Mtr , Transparent Tape 1 inch 60 Mtr , Transparent Tape 2 inch 60 Mtr , Tape 2 inch Brown , Tape 3 inch Brown , Tape 2 inch Transparent , Tape stand 1.6 inch x 2.5 inch , Calculator Small , Calculator Big , Dak Folder Red , Dak Folder Black , White Bd Marker Pen Black , White Bd Marker Pen Blue , Whitener Correction Pen , File Binder , Pencil Cell AAA , Pencil Cell AA , Scissor Big 200 mm , Paper cutter small , Paper cutter large , Spiral binding leaf A4 Blue , Spiral binding leaf A4 Transparent , Spiral binding ring 32 mm , Spiral binding ring 50 mm , Glue stick 15 gm , Fevicol Tube 100gm , Fevicol Tube 200gm , Gum Bottle 300gm , Plastic Cover or display cover For File , Stapler Small , Stapler Large , Stapler Pin Small , Stapler Pin Large , Call Bell , Carbon Paper , Photo Paper , Paper Punching Machine , Highlighter Yellow or Blue or Green , Tag Green Big 200 mm , Tag 150 mm , Clip board Omega , Colour flag set of five 76 mm x 25 mm size 120 sheets , Colour Flag plastic four strips , Pen and Pencil Stand Wooden , Adjustable Acrylic Writing Desk 21 inch x 15 inch , Plastic Sutli , Padlock 40mm , Padlock 70mm , Room Freshener , Paper cutter blade large , Paper cutter blade small , Sketch Pen Black , Paper Weight , Register 200 pages , Register 300 pages , Register 400 pages , Note Pad Offrs Champion dairy size 100 pages , Binder Clip 15 mm 12 pieces or pkt , Binder Clip 12 mm 12 pieces or pkt , Lamination sheet A4 Size , Drawing sheet Green , Drawing sheet Pink , Drawing sheet Yellow , Drawing sheet White , Drawing sheet Blue , Talc Sheet 60 Inch Width , Envelope 158 x 355 mm , Envelope 300 x 250 mm , Envelope Brown 110 x 220 mm , Envelope Brown 250 x 325 mm , Envelope Brown 254 x 127 mm , Envelope Brown 280 x 127 mm , Envelope Brown 300 x 100 mm , Envelope White 152 x 107 mm , Envelope DO White 122 x 176 mm , Envelope DO White 228 x 101 mm , Envelope 228 x 101 mm with Cloth , Envelope 250 x 325 mm with Cloth , Envelope 324 x 458 mm with cloth , Envelope Laminated 400 x 300 mm Brown
Closing Date22 Nov 2024
Tender AmountRefer Documents 

Ministry Of Defence - MOD Tender

Goods
Paints and Enamels
GEM
Kanchipuram, Tamil Nadu
Details: Lcm 445 Epoxy Primer 4 00ml , 33 2205 774 Paint Grey 400ml , 33b 2205 775 Paint Oxford Blue 400ml , 33b 2205 777 Paint Po Red 400ml , 33b 2205 779 Paint White 400ml , 33b 2205 780 Paint Golden Yellow 400ml , Paint Red Orange 400ml , Lcm 427 Non Skid Black 400ml , Heat Resisting aluminum Paint 400ml , Rac 7001 Paint Silver Grey 400ml , lcm 416 Paint Black 400ml , Lcm 730 Dye Penetrant Kit Set , Goggles Poly Carbon , Bottle Glass 250ml , Lcm 747 Hand gloves Cotton , Copper Wire Brush Fine , Brush Bristle , Brush hard Nylon , Paint Brush Bristle 1 Inch , Paint Brush Bristle half Inch , Brush Pencil Writing , Polishing Clothes , Masking paper 2 Inch , Paper Sponge Clothlcm 717 , Paper Abrasive water Proof , Scotch Brite Pad , Pd 680 White Spirit 500ml , lcm 203 Mek 500ml Bottle , Lcm 207 Wax Polish Liquid , lcm 216 Trichloroethylene 500ml , Lcm 220 Glycerin 200ml bottle , Lcm 302 Paint Remover 500ml , Lcm 403 Paint remover 500 Ml Hardener And Thinner , Polykote Silicon compound 50 Gm , Lcm 116321 4 Molykote Grease Tube , oks 601 Multi Functional Fluid Spray , Crc 226 Anti corrosion Fluid Spray , Wd 40 Hard Spray , Thinner Universal 500ml Bottle , Rustlic 631 Anti Corrosion Spray 340g , Lcm 510 Dinitrol Or Av25 500ml Can
Closing Date13 Aug 2024
Tender Amount₹ 1.4 Lac 
This is an estimated amount, exact amount may vary.

Irrigation Department Tender

Goods
GEM
Corrigendum : Closing Date Modified
Jhansi, Uttar Pradesh
Description: Ist class brick work in 1 4 with cement sand mortar including all cost of labour ,material T&P, etc complete, R.C.C. 1 1.5 3 in laboratory slab & platform for machine in hall including all cost of labour, material T&P etc .complete, Providing and laying steel reinforcement for R.C.C. including cutting, bending, placing and binding with G.I. wire ,labour etc. complete, Centering and shuttering including all cost of labour.T&P etc., Providing and laying Granite stone in laboratory slab i/c labour etc. complete, 12.5 mm thick plaster on brick work in 1 4 with cement sand mortar in Brick pedestal for slab resting including all cost of labour ,material T&P, etc complete, Sraping old colour or white washing or distemper , Supplying & laying two coat oil bond distemper painting including all cost of material, labour, T&P etc. complete, Supplying & laying enamel paint in two coats including all cost of material, labour, T&P etc. complete., Ceiling (S/Laying of 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm) in Laboratory Room, Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm. And under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including diposal of rubbish to the dumping ground all complete as per direction of Engineer in charge with cement mortar 1 4 (1 cement 4 coarse sand), Factory made single extruded WPC (Wood Polymer Composite) solid door/window, clerestory windows & other Frames/ Chowkhat of frame size 50 x 100 mm, Providing and Fixing of flush door 32 mm thick (ISI marked water proof) , Providinding and applying white cement based putty of average thickness 1 mm,of approved brand and manufacture, over the plastered wall surface to preparethe surface even smooth complete., Supplying & laying oil bond distemper on surface including all cost of material labour T&P etc.complete, Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i c malba, all complete as per the direction of Engineer in charge. Long pattern W.C Pan of size 580x440 mm, Providing and fixing white various china flat back half stall urinal 580x380x350 mm with white PVC automatic flushing cistern with fitting standard size CP brass with pipe spreaders with unions and clamps with waste fitting as IS 2556 CI trap outlet grating and other couplings in CP brass including painting of the fitting and cutting nad making good the wall and floors Single half stall Urinal with 5 Ltr PV automatic flushing cistern., Providing and fixing Wash Basin with CI brackets, 15 mm CP brass pillar taps, 32 mm CP brass waste of standerd pattern including painting of the fitting and cutting and making good the wall. White viteious china wast basin size 630X450 mm with a single 15 mm CP brass pillar Tap., Providing and fixing CP brass Bib Cock of approved quality confirming IS 8931 15 mm nominal bore, Providing and fixing CP brass long nose bib Cock of approved quality confirming IS standerd and weighing not less than 810 gm. 15 mm nominal bore, Providing and fixing CP brass stop Cock (Concealed) of staderd design and of approved make confirming to IS 8931 15 mm nominal bore, Providing and fixing CPVC pipe including all CPVC plain and brass threded fittings I/C complete in all respect 20mm , Providing and fixing CPVC pipe including all CPVC plain and brass threaded fittings I/C complete in all respect 25mm , Providing and laying ceremic glazed Floor Tiles of size 300x300 mm of Ist quality confirming to IS 15622 of approved make in colours laid on 20 mm thick cement mortor 1 4 jonting with gray cement slurry 3.3KG Sqmm including the joint filling with white cement and matching pigments etc. complete, Providing and fixing Ist quality ceremic glazed Wall Tiles of confirming to IS 15622 of approved make in colours laid on 12 mm thick cement mortor 1 3 jonting with gray cement slurry 3.3KG Sqmm including the joint filling with white cement mixed with pigments of matching shade complete., PVC pipe 110mm dia 6kg pressure ISI make, Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing Rectangular shape 453x357 mm, Title28 Title29 Title30 Title31 (As per attached specification)
Closing Date11 Mar 2024
Tender Amount₹ 3.3 Lac 
This is an estimated amount, exact amount may vary.

Southern Railway - SR Tender

Goods
Security and Emergency Services
Ireps
Salem, Tamil Nadu
Details: Door Frame Metal Detector - As Per Specifications : 1.standard External Size: 2200mm(h) X 800mm(w) X 580mm(d) 2.standard Internal Size: 2010mm(h) X700mm(w) X500mm(d) 3.package Size For Door Panels :2260* 650*260mm*1ctn 4.package Size For Control Unit : 780*390*250mm*1 Ctn 5.working Temperature:-20 Degree C -+50 Degree C 6.working Frequency :4khz -8khz 7.gross Weight :70 Kg(maximum) 8.power Supply :ac 100 V -*240v 9.type Of Usage :outdoor 10.detection Zone :multiple Zone 11.material Of Walk -through Arch :fiber 12.provided With Base Wheels For Easy Mobility :yes 13.provided With A Fioor Panel To Attach Both Side Panels To Give Stability & Rigidity To The Structure :yes 14.water Proof :yes 15.weather Proof :yes 16.bar Display To Indicate Metal Location Wrt Height On Person :yes 17.operating Temperature Range (degree C) Minus 20 To Plus 55 Degree C 18.battery :re-chargeable, Maintenance Free , Internal Battery With Charger 19.battery Back -up In Full Function (hours) :6-8 Hours 20.practical Training :1 Day 21.availability Of Spares For A Period Of 7 Years After The Warranty Period :yes 22.ruggedized Polypropylene Shock Proof Container Compliant To Ip 65 Or Better For Safe Transportation Of The Equipment :yes 23.warranty :02 Years 24.availability Test Report From Nabl/ilac Accredited Or Central Government Lab To Prove Conformity Of Products To The Specification :yes
Closing Date27 May 2024
Tender Amount₹ 3.5 Lac 
This is an estimated amount, exact amount may vary.

Indian Air Force - IAF Tender

Goods
Publishing and Printing
GEM
Corrigendum : Tender Amount Updated
West Midnapore, West Bengal
Details: Liquid Ink Pen V5 , Ball Point Pen Red , Ball Point Pen Black , ball Pen 045 , Rollar Ball Pen , Fountain Pen , Gel Pen V7 , uniball Gel Pen Blue , Add Gel Pen Blue , Pilot Gel Pen , Paper cutter , Sharpner , Staplar Pin 10 No , Staplar Pin Big , A4 size Paper , A3 Size Paper , Photo Paper 180 Gsm A4 Size , talk Sheet , Tape Double Sided , Cello Tape 2 Inch , Cello tape 1 Inch , Brown Tape 2 Inch , Lamination Sheet A4 , lamination Sheet A3 , Fevicol 400 Gm , Fevistick 25 Gm , ribbon Yellow , Ribbon Green , Ribbon Red , Aa Battery Long life , Aaa Battery Long Life , Notebook 400 Pages , Duster magnetic , Scale Plastic , Eraser Non Dust Big , Carbon Pencil extra Dark , Correction Pen Big , Correction Tape Big , conference Folder With Brass Zip And Leather Finish , Thermal folder With Water Proof Pockets , Document Folder With mobile Pocket , Document Folder With Mobile Pocket And card Holder , Plastic Sticky Notes , Plastic Paper Note 4x3 , highlighter Magenta Colour , Highlighter Lemon Colour , highlighter Light Green Colour , Register 300 Pages , register 500 Pages , Ohp Marker Blue , Ohp Marker Black , ohp Marker Red , Notepad 33 No. , White Board Marker alchohal Based Blue , White Board Marker Alchohal Based green , White Board Marker Alchohal Based Black , White board Marker Alchohal Based Red , Leather Clip Folder , Lever arch File Leather
Closing Date27 Nov 2024
Tender Amount₹ 12.7 Lac 

Uranium Corporation Of India Limited - UCIL Tender

Goods
Civil And Construction...+1Excavation
GEM
East Singhbhum, Jharkhand
Description: BOQ ITEMS: Earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. Lead including bailing pumping out any water accumulating inside the excavated trench, shoring strutting adequate protection to be taken during excavation drilling blasting transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 Mtrs. in the area as directed by the Engineer all complete as per drawing specification and direction of the Engineer.All types of soil , Earthwork in excavation in the following types of soil and rock up to and including 1.5 mtr. Lead including bailing pumping out any water accumulating inside the excavated trench shoring strutting adequate protection to be taken during excavation drilling blasting transporting the excavated soil for all lead stacking selectively including disposing off the rubbish rock fragments excess spoils etc. lead upto 100 Mtrs. in the area as directed by the Engineer all complete as per drawing, specification and direction of the Engineer. In Ordinary rock, Earth work in back filling with available earth including watering and compaction at all elevations around foundations walls wells tunnels pits culverts trenches road approaches and in plinth filling and area filling as per specifications and drawings and as directed by the Engineer with selected spoil within a lead of 100 mtr., Disposal carriage of rubbish waste rock earth etc.dumped stacked at site by mechanical means including loading unloading and dressing properly lead upto 5 Km. and up to any lift includind cost of all labours and equipments. , Surface dressing of the ground in all kinds of soil including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish lead up to 50 m and lift up to 1.5 m., Supply mix place in position compact cure cement concrete 1 cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size below foundations walls wells pits trenches etc. and in basin lining as per specifications drawings and directions of the Engineer and including cost of centring and shuttering but excluding cost of cement., Supply mix place in position compact and cure including testing of concrete specimens finishing surfaces as per specifications drawings and directions of the Engineer of the following grades of concrete with 20mm and down graded stone aggregate and coarse sand in super structure or any level excluding cost of centring shuttering cement and reinforcement. M20 RCC PCC, Taking delivery from store departmental yard bend bind and place the following types of reinforcement in all types of reinforced concrete work at all elevations including cleaning straightening cutting bending and binding with 18 SWG annealed wire or with welding such as tack lap butt etc with approved electrodes providing concrete cover blocks pins chairs nails supports of reinforcement etc. with all materials and labour complete as per drawings specifications and directions of Engineer excluding cost of reinforcement. , Install dismantle and remove the form work of approved quality including splay recess corners haunch etc. scaffolding necessary rendering of concrete surfaces after exposure including cost of all material and labours at all elevations. , Supply and laying in position brick work with designate 75 bricks in super structure etc in cement coarse sand mortar including mixing mortar laying bricks raking joints curing etc complete with all materials and labour as per drawings and specifications excluding cost of cement. , Providing and fixing 125 into 63 mm M. S. Hinges of approved quality and make., Providing and fixing ISI marked anodised aluminium tower bolt black finish Barrel type with necessary screws etc. complete 300 into 10 mm, Providing and fixing ISI marked anodised aluminium tower bolt black finish Barrel type with necessary screws etc. complete 150 into 10 mm, Providing and fixing bright finished brass hanging type floor door stopper with necessary screws etc. complete., Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer having brand logo with IS 3564 embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm with double speed adjustment with necessary accessories and screws etc. complete., Providing and fixing aluminium handles ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with necessary screws etc. complete 125 mm., Providing and fixing aluminium sliding door bolts ISI marked anodised anodic coating not less than grade AC 10 as per IS 1868 transparent or dyed to required colour or shade with nuts and screws etc. complete 300 into 16 mm, Cement concrete flooring 1 cement 2 coarse sand 4 graded stone aggregate finished with a floating coat of neat cement including cement slurry but excluding the cost of nosing of steps etc. Complete as per direction of Engineer in charge excluding cost of cement. 40 mm thick with 20 mm nominal size stone aggregate, Grading roof for water proofing treatment with Cement concrete 1 cement 2 coarse sand 4 graded stone aggregate 20 mm nominal size excluding cost of cement, 15mm thick minimum plastering with 1cement 6 coarse sand to all faces of walls channels in roof and other structures at various elevations including mixing laying finishing curing and necessary scaffolding work complete as per drawings specifications and instructions of the Engr. with all materials and labours excluding cement Including Making grove if required. Work will be done upto 10 m height., Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer specification., Applying neat cement punning including cost of all materials labours etc. Complete as per direction of Engineer in charge excluding cost of cement, Supplying and applying two or more coats of white wash with lime to walls ceiling etc. At various elevations including preparation of surfaces cleaning etc.complete with all materials labour scaffolding work as per specifications ., Supplying and applying two or more coats of approved water proof cement paint over a coat of primer to exterior surfaces of concrete masonry plastered surfaces etc.at all elevations and including preparation of surface necessary scaffolding work etc.complete with all materials and labour Application of paint should be made as per manufacturer specifications to give an even shade. , Drain cleaning including disposal of rubbish up to 5 km all complete as per direction of EIC, Cleanning of chajja roof RWDC Floor corner drains etc., Painting with synthetic enamel paint of approved brand and manufacturer of required colour to give an even shade two or more coats on new old work over a priming coat complete as per specification and direction of Engineer in charge. , Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators side top centre hung with beading and all members complete of standard rolled steel sections joints mitred and flash butt welded and sash bars tenoned and riveted including providing and fixing of hinges, pivots including priming coat of approved steel primer but excluding the cost of other fittings complete all as per approved design sectional weight of only steel members shall be measured for payment Fixing with 15 into 3 mm lugs 10 cm long embedded in cement concrete block 1 Cement 3 coarse sand 6 graded stone aggregate 20 mm nominal size, Taking delivery from store departmental yard fabrication and erection of Structural steel work riveted bolted or welded in built up sections trusses and framed work including cutting hoisting fixing in position and applying a priming coat of approved steel primer all complete., Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete., Providing and fixing oxidised M.S. casement stays straight peg type with necessary screws etc. complete., Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc 20 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc 25 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc 50 mm dia nominal bore, Providing and fixing following G.I. pipes complete with G.I. fittings including trenching and refilling etc 100 mm dia nominal bore G.I. CPVC.., Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore, Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore, Fixing of old G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore, Providing and fixing C.P. brass bib cock Pillar Cock of approved quality conforming to IS8931. 15 mm nominal bore., Providing and fixing C.P. brass stop cock concealed of standard design and of approved make conforming to IS 8931. 15 mm nominal bore., Making pocket size 0.20 into 0.20 into 1.0m , Demolishing brick work in cement mortar manually by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge., Demolishing R.C.C.PCC work manually by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer in charge., Dismantling G.I. pipes external work including excavation and refilling trenches after taking out the pipes manually by mechanical means including stacking of pipes within 50 metres lead as per direction of Engineer in charge upto 150 mm dia, Cutting holes of required size in brick masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS 12818 and making good the same etc. complete as per direction of Engineer in charge., Providing and fixing Renewing glass panes with putty and nails wherever necessary including racking out the old putty Float glass panes of thickness 5.5 mm, Renewing of old glass putty, Supplying laying in position stone masonary with Hard rock boulder with cement morter 1cement isto 6coarse sand morter finishing the top with PCC 1 isto 2 isto 4 reasonably smooth complete with curing and raking of joints including cost of all material equipments and labour excluding cost of cement. , Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete., Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade Old work one or more coats, Supplying Grouting with Anchor NSG as per manufactureres instruction at any level and any place as per direction of Engineer in charge., Providing and fixing 35 mm thick factory made PVC door shutters with frame 65mm into 55mm with wall thickness 2 mm all complete as per manufacturers specification and direction of Engineer in charge. , Providing and fixing ISI marked flush door shutters conforming IS2202 non decorative type core of block board construction with frame of 1st class hard wood and well matched comercial 3 plyveneering with vertical grains or cross bands and face veneers on both faces of shutters 30 mm thick including ISI marked stainless steel butt hinges with necessary screws., Providing and fixing precoated galvanised iron profile sheets of 0.50 mm total coated thickness with zinc coating 120 grams per sqm in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer in charge. The sheet shall be fixed using self drilling self tapping screws of size 5.5 into 55 mm with EPDM seal complete upto any pitch in horizontal vertical or curved surfaces including ridges barge board etc excluding the cost of purlins rafters and trusses and including cutting to size and shape , Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete Ridges plain 500 to 600mm, Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete. Barge board up to 300mm, Providing and fixing Following precoated galvanised steel sheet roofing accessories 0.50 mm total coated thickness Zinc coating 120 grams per sqm in 240 mpa steel grade 5 microns epoxy primer on both side of the sheet and polyester top coat 15 microns using self drilling self tapping screws complete . Gutter 600 mm over all girth, Providing reinforced by organic fibres or inorganic synthetic fibres cement 6 mm thick corrugated sheets roofing up to any pitch and fixing with polymer coated J or L hooks bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete excluding the cost of purlins rafters and trusses including cutting sheets to size and shape wherever required. , Providing and fixing Following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks bolts and nuts and or G.I. seam bolts and nut G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete. Close fitting adjustable ridges, Providing and fixing Following fibre cement high impact polypropylene reinforced roofing accessories in all colours with polymer coated J or L hooks bolts and nuts and or G.I. seam bolts and nut G.I. plain and bitumen washers or with self drilling fastener and EPDM washer etc. complete. Barge boards , Providing fixing UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch including fixing with polymer coated J or L hooks bolts nuts 8mm dia. G.I plain bitumen washers complete but excluding the cost of purlins rafters trusses etc. The sheets shall be manufactured out of 2400 TEX panel rovigs incorporating minimum ultra-violet stabiliser in resin system under approximately 2400 psi and hot cured. They shall be of uniform pigmentation and thickness without air pockets.The sheets shall be opaque or translucent clear or pigmented textured or smooth as specified. 2 mm thick corrugated as directed by EIC, Repairing and maitenance of Rolling shutter in all respect including greasing repairing replacement of material to repairing of rolling shutter. Supply and fixing 27.5 cm long springs., Repairing and maitenance of Rolling shutter in all respect including greasing repairing replacement of material to repairing of rolling shutter. Supply and fixing ball bearing, Supply and fixing precast slab 0f M20 grade, Repairing of false floor including providing and fixing PVC rigid foam sheet 1 mm thick on existing false floor boards shutters using synthetic rubber based adhesive all complete as per direction of Engineer in charge. , Providing wood work in frames of false ceiling floor partitions etc. sawn and fixed in position Sal wood and 15 mm thick light weight integral densified micro look edged with PVC top matt false floor tiles of size 595 into 595 mm including cost of all materials labours and as per direction of Engineer in charge. , Aluminum work for shutters of doors windows ventilators including providing and fixing hinges pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber neoprene gasket required Fittings shall be paid for separately Polyester powder coated aluminium minimum thickness of polyester powder coating 50 micron, Providing and fixing water closet squatting pan Indian type W.C. pan with 100 mm sand cast Iron P or S trap 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device handle lever with all fittings and fixtures complete including cutting and making good the walls and floors wherever required White Vitreous china Orissa pattern W.C. pan of size 580 into 440 mm with integral type foot rests., Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430 into 260 into 350 mm or 340 into 410 into 265 mm sizes respectively., Providing and fixing wash basin Kitchen Sink with C.I. brackets, 15 mm C.P. Brass pillar taps 32 mm C.P. brass waste of standard pattern including painting of fittings and brackets cutting and making good the walls wherever require White Vitreous China Wash basin size 630 into 450 mm with a single 15 mm C.P. brass pillar tap all complete as per direction of EIC., Providing and fixing white vitreous china water closet squatting pan Indian typeOrissa pattern W.C. pan of size 580 into 440 mm, Supply and fixing PVC connecting pipe 15 mm N B, Supply and fixing PVC flexible waste pipe 32/40 mm N B, Supply and fixing float ball valve 20 mm N B, Providing and fixing G.I. chain link fabric fencing of required width in mesh size 25 into 25 mm made of G.I. wire of dia 3 mm including strengthening with 2 mm dia wire or nuts bolts and washers as required complete as per the direction of Engineer in charge. , Dismantling steel work in built up sections in angles tees flats and channels including all gusset plates bolts nuts cutting rivets welding etc. including dismembering and stacking within 50 metres lead., Dismantling following roofing including ridges hip valleys and gutters etc.and stacking the material within 50 metres lead of G.S. Sheet..., Dismantling following roofing including ridges hips valleys and gutters etc.and stacking the material within 50 metres lead of Asbestos cement sheet, Providing and fixing PTMT grating of approved quality and colour Circular type 125 mm nominal dia with 25 mm waste hole.
Closing Date31 Jul 2024
Tender Amount₹ 79 Lac 

Uranium Corporation Of India Limited - UCIL Tender

Goods
Civil And Construction...+1Excavation
GEM
East Singhbhum, Jharkhand
Description: BOQ ITEMS: Earth work in excavation ( exceeding 30cm in depth 1.5 Mtr. in width or 10 Sq.m. on plan ) by mech/manual means including dressing of sides and ramming of bottoms, lift upto 1.5 mtr including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 mtr. All kinds of soil , Cleaning Jungle including uprooting of rank vegetation, grass, brush wood, trees and sapling of girth upto 30cm. Measured at a height of 1 m above ground level and removal of rubbish upto a distance of 2KM out side the periphery of the area cleared by your own vehicle., Providing and laying in position Plain cement concrete 1- 3 - 6 ( 1 Cement - 3 Coarse - 6 Graded stone aggregates 20 mm nominal size) excluding the cost of centering, shuttering in foundation, footings, and bases of column as per specifications and drawings and direction of Engineer in charge, Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, - All work up to plinth level .Grade-1-2-4 (1 cement - 2 coarse sand - 4 graded stone aggregate 20mm nominal size), Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering,- All work above plinth level .Grade- 1-1.5-3 (1 cement - 1.5 coarse sand - 3 graded stone aggregate 20mm nominal size), Providing and laying Hire and labour rate for fixing centering shuttering for concrete works to anywhere at any level (including staging) including strutting, propping etc. and removal of form or striking out after completion of works as directed and specified by the Engineer-in-charge.(Material for shuttering to supplied by the contractor) - a) Foundations, footings, bases of columns plinth beam etc, b) Suspended floors, roofs, landings, balconies, shelves etc., Providing and laying for Fixing steel reinforcement for reinforced cement Concrete work including transporting , decoiling, straightening, cutting, derusting bending, placing in position at all height and binding with binding wire etc. complete as per drawing, specification and instruction of the Engineer-in-charge. , Brick work with bricks of class designation 75 in foundation and plinth in- Cement mortar 1-6 (1 Cement - 6 Coarse sand) . , Brick work with bricks of class designation 75 in superstructure with cement mortar 1-6 (1 cement - 6 course sand) including all materials, labour, scaffolding, racking out joints, curing as per specification and direction of the Engineer-in-charge. , Providing and fixing factory made solid core, commercial flush door shutters non-decorative type, core of block board construction with well seasoned chemically treated timber of moisture content, not exceeding 12 per cent and side styles, top and bottom rails of main width as per I.S. Code, well seasoned hard wood chemically treated and well matched commercial ply veneering with vertical grains on cross bends on both faces of shutters, hot pressed and banded with phenol formaldehyde synthetic resin conforming to I.S./ 2202 (part - I) / 1930. a) 35mm thick shutter with 100mm oxidized S.S. butt hinges with necessary screws for double or single leaf shutters complete., Providing and fixing aluminum (Heavy type) sliding door bolts with nuts and screws etc. complete. a) 300 x 16mm, Providing and fixing anodized aluminum tower bolt including necessary screws etc. complete.250 X 10mm, Providing and fixing anodized aluminum door handle including necessary screws etc. complete.a) 125mm, Providing and fixing Structural steel work reveted,bolted or welded in built up sections, trusses and framed work ,including cutting hoisting, fixing in position and applying a priming coat of approved steel primer. , Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS - 13592 Type A, including jointing with seal ring conforming to IS - 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.110 mm diameter, 12 mm cement plaster of mix - 1- 6 (1 cement - 6 coarse sand ), White washing with lime to give an even shade - New work (three or more coats)., Finishing walls with Premium Acrylic Smooth exterior paint(Weather Coat) with Silicone additives of required shade- New work (Two or more coats applied at the rate of 1.43 Itr/10 sqm over and including priming coat of exterior primer applied at the rate of 2.20 kg/10 sqm), Supplying and Painting with synthetic enamel paint/ aluminum paint of approved brand and manufacture Two or more coats in new work..Two or more coats in new work., Providing & fixing White vitreous china water closet squatting pan (Indian type) along with S or P trap including dismantling of old WC seat and S or P trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. Orissa pattern W.C Pan of size 580x440 mm, Fencing with angle iron post placed at required distance embedded in cement concrete blocks, provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used- With G.I Barbed wire, Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia 4 mm, Providing and fixing white vitreous china wash basin with C.I./ M.S. brackets, 15mm C.P.brass pillar tap (single) 32mm C.P. brass waste of standard Pattern, including PVC waste pipe and PVC connector pipe including painting of fitting and brackets , cutting and making good the walls wherever required.a)Wash basin size- 550 X 400mm., Providing and fixing low level 10 litres capacity white P.V.C. flushing cistern with manually controlled device conformed to IS - 7231 with all fittings and fixtures complete Make-Hindware, Providing and fixing 32 mm dia. P.V.C. flexible waste pipes for sinks and wash basins., Providing and laying for fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. (Internal work) free of cost. a)15mm dia Nominal bore , a)20mm dia Nominal bore , Providing and fixing heavy duty C.P brass bib cock of 15mm nominal bore as per approved sample (Brand--Jaquar)., Grading of roof for water proofing treatment with cement concrete 1-2-4 (1 cement - 2 coarse sand - 4 graded stone aggregate 12mm nominal size) mix with Sika Top Seal and Sikadur 32 in appropriate proportion
Closing Date7 May 2024
Tender Amount₹ 7.2 Lac 

Irrigation Department Tender

Goods
GEM
Corrigendum : Corrigendum Added
Kanpur Nagar, Uttar Pradesh
Description: Dismantling old and damaged cement concrere including cost of all labour T&P etc. complete in all respects , Dismantling old and damaged Brick Work including cost of all labour T&P etc. complete in all respects , Scraping old white or colour wash including disposal of refuse as directed by the Engineer in charge with in a distance of 60 meters., Supplying & Placing of Murga Jali on roof including cost of all material, labour T&P etc. complete in all respects, Cement Concrete 1 1.5 3 Over murga jali on roof with water proffing compound including cost of all material, labour T&P etc. complete in all respects, Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm. And under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including diposal of rubbish to the dumping ground all complete as per direction of Engineer in charge with cement mortar 1 4 (1 cement 4 coarse sand), Providinding and applying white cement based putty of average thickness 1 mm,of approved brand and manufacture, over the plastered wall surface to preparethe surface even smooth complete., Wall Painting with plastic emulsion paint of approved brand and manufacture to give an even shade one or more coats on old work. etc. including cost of materials, labour,T&P complete in all respects, Finshing walls with premium accrylic smooth exterior paint with silicon addetives of required shade old work over existing cement paint surface. etc. including cost of materials, labour,T&P complete in all respects, Providing and laying vitrified floor tiles in size 600mmx 600mm of approved make including joint filled with white cement etc. including cost of materials, labour,T&P complete in all respects , Renewal old putty of glass pans etc. including cost of materials, labour,T&P complete in all respects , Renewing glass pannes, with putty and nails whereever necessary including racking out the old putty. Float glass panns of nominal thickness 4 mm etc. including cost of materials, labour,T&P complete in all respects , Painting and Varnishing on iron works in small area approved suprior quality ready mixed paint of clear synthetic varnish including supply of material, labour and T&P etc for proper completion of work. , Dismantling of W.C pan of all size etc. including cost of materials, labour,T&P complete in all respects , Dismantling of tile work laid down cement mortar including upto 50 meter disposal including cost of all material, labour T&P etc. complete in all respects, Providing and laying ceremic glazed Floor Tiles of size 300x300 mm of Ist quality of approved make in colours laid on 20 mm thick cement mortor 1 4 jonting including the joint filling with white cement. including cost of all material, labour T&P etc. complete in all respects, Providing and fixing White Vitreous China Wall Mouting Water Closet squating pan (European type 780x370x690m pan) with low level white PVC flushig system, including flus pipe manually control device (handle lever) with all fitting and fixture complete, including cutting making wood the wall and floors wherver required.including cost of all material, labour T&P etc. complete in all respects , PVC Wall Panelling hot stamping and lamination,water proof ,temper proof on walls and celling etc including cost of materials, labour,T&P complete in all respects , Providing & Fixing 15mm Dia CPVC Pipes including cost of materials, labour,T&P complete in all respects., Providing & Fixing 15 mm Dia C.P. Brass Bib Cock including cost of materials, labour,T&P complete in all respects., Providing & Fixing 15 mm Dia C.P. Brass Stop Cock including cost of materials, labour,T&P complete in all respects. , Providing & Fixing 15 mm Dia C.P. Brass Angle Valve including cost of materials, labour,T&P complete in all respects., Providing & Fixing Wash Basin including cost of materials, labour,T&P complete in all respects., Providing & Fixing P.V.C. waste Pipe for wash basin including cost of materials, labour,T&P complete in all respects., Wiring point for light with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core cable Earth etc complete in all respects. , Wiring point for fan with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core cable etc complete in all respects. , Wiring point for Plug with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core etc complete in all respects. , Wiring point for call bell with 1.5 sq.mm P.V.C. insulated and P.V.C Sheathed T.R.S. single core cable with1.5 sq.mmP.V.C. insulatedT.R.S. single core etc complete in all respects.
Closing DateCancelled
Tender AmountRefer Documents 
4171-4180 of 4201 archived Tenders