Vehicle Tenders

Details: Hire of vehicles for collection and transportation of Garbage Mix Debris, Silt, Floating Material, Scrapping Material and Odd article etc. from narrow lanes and hilly area of L Ward.

Details: Providing rounds the clock surveillance, security, gate manning and entry/exit of vehicles through DGR at ERPL, Asansol Pump station for the period of Two (02) years.

Description: In Tiruppur Registration District, Panadam Sub- Registration District, Palladam Taluk In Kodangipalayam Village, In S.f.no: 279 An Extent Of 11.72 Cents In This An Extent Of 6.48 Acres And In This Situated Within The Following Boundaries And Measurements. East Of-50 Cents Land Belong To Jayanthi, West Of- The Property Belong To Chinnasamy And Others In S.f. No. 279, North Of - Venkataraman Lands In S.f.no: 279/1a & 23 Ft North-south Road, South Of -the Property Retained By Palanisamy In S.f.no: 279. in This An Extent Of 50 Cents Or 21800 Sq. Ft With A A.cc Sheet Building, E.b With Deposit Thereon, With All Rights In The 23 Feet North-south Road on The Eastern Side Of The Land In S.f.no.279/1ato Use Lorry And Other Vehicles Door No. 3/742, Chinna Kodagipalayam. the Property Lies In The Present Sub Divided In S.f.no:279/1 Now Sub Divided In S.f.no.279/1c As Per Patta No.1256.

Details: Rmo 500 Kva And 380 Kva Dg Set Installed At Production Wing Rmo 380 Kva And 280 Kva Dg Set Installed At R And T Wing And Rmo 750 Kva Dg Set Installed For Dpt Building At Cri Kasauli For The Year 24-25 Rmo Of Electrical Installation Fans Electric Sub Station Water Supply Pump Street Light Split Hot And Cold Invertor Based Ac Cctv Lift At R And T Wign Production Wing And Rmo Of 2 X 750 Kva Sub Sation At Dpt For Year 2024-25 Sh Pdg Inspection Vehicle On Hire Basis

Details: Work Contract for Repairing works of starter, alternators, battery, electrical wiring for locomotives, Bulldozers, light and heavy vehicles on as & when required basis at CHP Paras TPS.

Description: CATEGORY: Wood Lathe machine 01 nos , Drilling machine , Power Jig Saw , Wood cutting and Planing machine , Grinding machine Qty 3 Nos , Power band saw 01 Nos , Floating dock model , ICCP training jig , Anchor and capstan , Lathe machines Qty 5 Nos , Pipe bending machines Qty 1 Nos , Compressor 500 Ltrs Min Qty 01 , Compressor 420 Ltrs Min Qty 01 , Compressor 200 Ltrs Min Qty 01 , Radial Davit , Bow door and Ramp Door 2 nos , Radial Drilling Machine , Twin arm davit , Single Arm Davit , Accommodation Ladder , Sewage Treatment Plant , Vacuum Toilet System , Hydraulic Davit model , Hydraulic Hangar Door model , Fork Lift , Electrical Lister Vehicle , Deck Washing Machine , Lathe Machine with accessories Manufacturer Parmar Mechanic Works , Barmi Miling Machine , Disc Grinder 3 inch , Double Disc Grinder DDS 18 inch , Pelicon Combined Surface Thickness Model SSPI , Air Compressor with accessories , Drilling Machine Swift Bench Type , Circular saw bench rise and fall , Pelico n Wood and Metal Bend Saw Machine , Facit saw Machine , Pencil Grinder Size 6 inch , Hard field Circular Saw machine , Jig Saw machine with square table pedestal , Bench Lathe Machine , Helo Traversing System HTS Make L and T , Foldable Hanger Door FHD Make L and T

Description: 03132411 0047 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Ofcond. & U/s. 8 Wheeler , Boxnrboxn M1, Boxnha M1. Wagons Available On Rails. 1)ser Boxnr 25079461170, 2) Ser Boxn M1 10079487442,3) Nr Boxnha M1 10039460034, 4) Scr Boxn M1 10099403231 ,5) Scr Boxn M1 10099461354, Location Road No.1at Dump Yard. Rc Items:1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears, 5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb9.yoke Pin Support (1st Plate), 10.safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 .knuck Pin. Ds8 No:0999603047 Dt:01.11.24.note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight: 50.135mt(m.s-45.949 Mt, Ss-4.186 Mt) Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: 03132501 0075 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Of Cond. & U/s. 8 Wheeler , Bcn M1. Wagons Available On Rails. 1)cr Bcn M1 30018933540. 2) Er Bcn M1 30028961441.3) Cr Bcn M1 30018961055 4) Nfr Bcn M1 30058960483 .5) Wr Bcn M1 30088960910 .. . Location Road No.1 At Dump Yard. Rc Items:. 1.coupler Bodies (nt), 2.yokes 3.knuckles, 4.draft Gears,5.striker Castings (nt), 6.centre Pivots, 7. Casnub Bogies With All Fittings,8.wheel Set With Ctrb 9 .yoke Pin Support (1st Plate), 10 .safety Plate With Anchor Plate (2n D Plate), 11.yoke Support Plate(3rdplate),12.yoke Pin 13.draft Gear Follower 14 Knuckle Pin.15. Bcn Swing. Ds8 No:0999603075 Dt:10.01.25 .note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight : Ms: 73.963 Mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos

Description: CATEGORY: Kanni Meduim , Kanni Small , Pathar wali hathori , Shovel Favda , Gurumala , Basuli Entwali , Wrench 14 inch , Wrench 12 inch , Choodi Renchid Singhle Handle Dye half inch Guthka , Choodi Renchid Singhle Handle Dye three fourth inch Guthka , Choodi Renchid Single handle Dye 1inch Duthka , Kauwa Plier Nozzle , Normal Plier Nozzle , Hammer Rotary Drill Machine , Slide Wrench 10 inch , Small Plier 6 inch , Big Plier 8 inch , Screw Driver 14 inch , Screw Driver 12 inch , Allen Key Set , Mini cutter Pruning Shears , Hedge Cutter , Kudal , Water Pipe half inch, 4 kg , Water Pipe Third fourth inch, 4 Kg , Small Darati , Open Jaw Spanner Set , Ring Spanner Set , Hammer , Water Pressure Pump for vehicle waship , Car Washing Nozzle of Different types , Car Washing Nozzle of different types , Car Washing Pipe , Round bit Square hole mortise bit with attachment , Chisel set for wood work , File Set , Pincer , Hot Gun , Circular Saw Blade , Electric Saw Blade Set , Glass Cutter , Measuring Tap 5 Meter with Level , Clamp 12 inch,18 Inch , Mini Electric Saw , E-Digital Measuring Tap 3M , 10 Inch Wet Sharpener machine Long Allowing , Square Chesel Machine , Miter Metal Cutting Saw Machine , Bench Drill Machine Stand With Motor , Grinder machine

Description: 03132501 0073 98110159 (01) (hsn Code: 72044900 - Gst 18% On Fcm Basis), Scrap Of Cond. & U/s. 8 Wheeler , Bcn M1. Wagons Available On Rails. 1)wr Bcn M1 30088961023 . 2) Er Bcn M1 30028967139 . 3) Er Bcn M1 30028962547 .4) Cr Bcn M1 30018961222.5) Ser Bcn M1 30078963181 . . Location Road No. 1 At Dump Yard. Rc Items:. 1. Coupler Bodies (nt), 2. Yokes 3. Knuckles, 4. Draft Gears,5. Striker Castings (nt), 6 .centre Pivots, 7. Casnub Bogies With All Fittings,8. Wheel Set With Ctrb 9 . Yoke Pin Support (1st Plate), 10 . Safety Plate With Anchor Plate (2n D Plate), 11. Yoke Support Plate(3rdplate),12. Yoke Pin 13. Draft Gear Follower 14 Knuckle Pin. 15. Bcn Swing. 16. Bcn Flap Ds8 No :0999603073 Dt:10.01.25 .note To Purchaser: Before Delivery Of Wagon Cut Off Parts, The Declared Rc Items Need To Be Handed Over By The Purchaser To Sse/scrap At Shop Floor By Transporting Through Purchaser¿s Vehicle/labor Approx Weight :ms: 72 .917 Mt Sold On Number Basis Only Delivery In Cut Up Parts. Note:-if Any Non Ferrous Items Found In Cutting/delivery, Purchaser Should Be Handed Over To Railways. 05 Nos