State Infrastructure And Industrial Development Corporation Of Uttarakhand Limited Tender
View complete overview of Uttarakhand SIIDCUL Tender
State Infrastructure And Industrial Development Corporation Of Uttarakhand Limited - SIIDCUL Tender
Civil And Construction
Building Construction
Eprocure
Opening Date15 Feb 2025
Closing Soon10 Mar 2025
Tender Amount₹ 2,99,72,738.65
Technical
Technical
Financial
Bid Capacity
... View More
The bid capacity required in the given tender to bid can be calculated using the following formulas: 1. Financial Resources Requirement for Current Contract Commitments: - Monthly Financial Resources Requirement = Outstanding Contract Value / Remaining Contract Period in months - Cumulative Financial Resources Requirement for Current Contract Commitments = Sum of Monthly Financial Resources Requirements for all contracts 2. Financial Resources Requirement for Subject Contract: - This is specified as 10% of the estimated cost of the subject contract. 3. Total Financial Resources Requirement: - This is the sum of the Cumulative Financial Resources Requirement for Current Contract Commitments and the Financial Resources Requirement for the Subject Contract. The formulas are as follows:
- A (Cumulative Financial Resources Requirement for Current Contract Commitments) = Σ (B / A) for all contracts
- B (Financial Resources Requirement for Subject Contract) = 10% of the estimated cost of the subject contract
- Total Financial Resources Requirement = A + B Where:
- A = Cumulative Financial Resources Requirement for Current Contract Commitments
- B = Financial Resources Requirement for Subject Contract
- B / A = Monthly Financial Resources Requirement for each contract
- Σ (B / A) = Sum of Monthly Financial Resources Requirements for all contracts Additionally, the tender requires:
- Average Annual Construction Turnover: Minimum average annual construction turnover of INR (equal to 50% of the estimated cost of the work/time period for completion in years) - Historical Financial Performance and Pending Litigation are also required. Formulas:
- Average Annual Construction Turnover: INR (equal to 50% of the estimated cost of the work/time period for completion in years)
- Enhancement factor for cost of works executed and financial figures is provided for years 2022-2023 and 2021-2022.
- Performance security: 5% of the contract price, with additional performance security for unbalanced bids based on the estimated item rates.
Technical Capacity
... View More
The required prior work experience for the bidder includes specific requirements for different positions: - Assistant Engineer: 3 years of total work experience, with 2 years of experience in similar works.
- Junior Engineer: 5 years of total work experience, with 2 years of experience in similar works.
- Surveyor: 5 years of total work experience, with 2 years of experience in similar works.
- Construction Safety Officer: 2 years of total work experience, with 1 year of experience in similar works.
- Supervisor: 5 years of total work experience, with 2 years of experience in similar works. The bidder should have experience under construction contracts for at least the last 5 years prior to the bid submission deadline. The tenderer must have completed successfully at least one similar nature of work of value not less than Rs. 0.90.00 Lakh, which is 25% of the advertised Estimated Cost, during the last three financial years.
Costs
EMD
₹ 7,00,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Summary
Construction Of Common Facility Center For Jaggery And Khandsari Cluster Haridwar, Uttarakhand
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SIDCU_80357_1Tender No
179/SIIDCUL/2025Tender Authority
State Infrastructure And Industrial Development Corporation Of Uttarakhand Limited ViewPurchaser Address
-Website
http://https://www.siidcul.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor:
781.78
-
205412.7
... More
Excavating, supplying and filling of local earth (including royalty) by mechanical trasport upto a lead of 15km also including ramming and watering of the earth in layers not exceeding 20cm in trenches, plinth, sides of foundation etc. complete.
90.14
-
53510.71
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size)
267.01
-
1541416.69
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size)
89.91
-
31304.86
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setiing of concrete, improve workability without impairing strength and durability as per dirention of Engineer-in-charge. "(Note:- Cement content considered in this item is @ 330kg/cum." excess/ less cement used as per designmix payable/recoverable separatly)All works upto plinth level.
251.53
-
2026041.45
... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setiing of concrete, improve workability without impairing strength and durability as per dirention of Engineer-in-charge. "(Note:- Cement content considered in this item is @ 330kg/cum." excess/ less cement used as per designmix payable/recoverable separatly)All works above plinth level upto floor V level
62.69
-
523854.57
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more.
30833.31
-
2818164.53
... More
Centring and shuttering including strutting,Propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete.
311.9
-
103653.73
... More
Centring and shuttering including strutting,Propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts.
358.73
-
292242.98
... More
Centring and shuttering including strutting,Propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers.
351.81
-
219554.07
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)
13.97
-
84438.59
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in:Cement mortar 1:6 (1 cement : 6 coarse sand)
203.45
-
1570005.34
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level upto floor V level in all shapes and sizes in:Cement mortar 1:4 (1 cement : 4 coarse sand)
31.02
-
29542.52
... More
Extra for providing and placing in position 2 Nos 6mm dia. Bars at every third course of half brick masonry. (with F.P.S. bricks).
31.02
-
2754.89
... More
Providing and fixing fly proof galvanised M.S wire gauze to windows and clerestory windows and doors with M.S. Flat 15 x 3 mm and nuts & bolts complete. stainless steel (grade 304) wire gauze of 0.5mm dia & aperture 1.4 mm in both sides.
71.46
-
68647.33
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D, F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and reveted, including providing & fixing of hinges,pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15X3 mm lugs 10 cm long embedded in cement concrete block 15X10X10 cm of C.C. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)
1071.9
-
119452.54
... More
Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge: Profile C fixing with adjustable lugs with split end tail to each jamb.
270.6
-
140287.16
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
909.36
-
133012.09
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete.
1740.58
-
1557888.72
... More
Proving and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steek grade, 5-7 microns epoxy promer on both side of the sheet and polyester top coat 15-18 microns. sheet should have protective guard film of 25 microns minimum to avoide scratches during transportation and should be supplied in single lenth upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/ self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surface, excluding the cost of purlins, rafters and trusses and including cutting of size and shape wherever required.
3298.76
-
2064924.8
... More
Provinding and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet & polyester top coat 15-18 microns using self drilling/ self tapping screws complete.Ridges Plain (500-600mm)
71.22
-
32130.19
... More
Provinding and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50mm (base metal of minimum 0.45mm thickness with total coating thickness of 0.05mm) with zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet & polyester top coat 15-18 microns using self drilling/ self tapping screws complete.Gutter (600mm overall girth)
142.42
-
158557.61
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 110mm diameter.
116.04
-
37113.07
... More
Providing and fixing on the wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Coupler (110mm)
24
-
2769.12
... More
Providing and fixing on the wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Bend 87.5 degree 110mm bend
12
-
1529.04
... More
Providing and fixing on the wall face unplasticised- PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.Shoe (plain) 110mm shoe
12
-
1340.88
... More
Providing and fixing unplasticised- PVC pipe clips of approved design to unplasticised- PVC rain water pipes by means of 50x50x50mm hard wood lugs, screwed with M.S. screws of required length including.
36
-
11327.76
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works
103870.8
-
15193181.92
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C
127
-
157888.94
... More
Wiring for twin control light point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required.
2
-
2647.46
... More
Wiring for light/power plug with 2x4 sq.mm FR PVC insulated copper conductor single core cable in surface/ recessed steel conduit alongwith 1 No 4 sq. mm FR PVC insulated copper conductor single core cable for loop earthing as required.
200
-
56610
... More
Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 2x2.5 sq. mm + 1x2.5 sq.mm earth wire
400
-
93220
... More
Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4 X 6 sq. mm + 2 X 6 sq. mm earth wire
100
-
63898
... More
Wiring fir curcuit/ submain wiring alongwith earth wire the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required. 4x10 sq. mm + 2x 6 sq.mm earth wire
50
-
42584.5
... More
Supplying and drawing following pair 0.5 mm dia FRLS PVC insulated annealed copper conductor, unarmored telephone cable in the existing surface/ recessed steel/ PVC conduit as required. 2 Pair
40
-
1288
... More
Supplying and fixing of following sizes of PVC conduit along with accessories in surface / recess including painting in case of surface conduit, or cuttting the wall and making good the same in case of recessed conduit as required. 25mm
400
-
49152
... More
Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required. 75 mm X 75 mm X 60 mm deep
10
-
1508.5
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 5/6 amps switch
20
-
1745.8
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 3 pin 5/6 amp socket outlet
20
-
2067.8
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. Telephone socket outlet
2
-
250.84
... More
Supplying and fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.
31
-
9694.01
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings).
10
-
4042.4
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required.
10
-
4966.1
... More
Supplying and fixing 3 pin, 5 amp. ceilling rose on the existing junction box/ wooden block including connection etc. as required
31
-
2285.63
... More
Supplying and flxing brass batten/angle holder including connection etc. as required.
46
-
5106.92
... More
Installation, testing and commissioning of pre-wired, fluorescent fitting/ compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling / wall, including connection with 1.5 sq.mm FR PVC insulated, copper conductor, single core cable and earthing etc. as required.
47
-
8205.26
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq, mm FR PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.
31
-
8905.99
... More
Installation of exhaust fan upto 450 mm sweep in the existingopening, including making the hole to suit the size of the above fan, making good the damage, connection, testing, commissioning etc. as required.
8
-
3050.88
... More
Extra for fixing louvers/shutters complete with frame for a exhaust fan of all sizes.
8
-
1403.36
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 volts, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way (4 + 24), Double door
2
-
10113.56
... More
Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissoning etc. as required.63 amps
4
-
3505.08
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
12
-
2603.4
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc.with charcoal/ coke and salt as required..
2
-
12664.4
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating
with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)
40
-
4881.2
... More
Supply of AC 230/250 volts, 50 HZ energy efficient ceiling fan with standard down rod, blades, 3 nos. caps Model-Captiva 50 (1200 mm Sweep) etc. complete in all aspects as per direction of Engineer in Charge 1200 mm sweep
31
-
70958.38
... More
Supply of AC 230/250 volts, 50 HZ exhaust fans including providing nuts, bolts, mounting frame and other accessories etc. complete . Model- Ventil Air - DS (Make : Finolex) 300 mm sweep 900 rpm ,complete in all aspects as per direction of Engineer in Charge. 300 mm sweep 900 rpm
8
-
15430.48
... More
SUPPLY OF LED Glass Bulb B22, 15 W ,6000k /4000k/3000K ,230/250 Volt,50 HZ ETC, complete in all aspects as per direction of Engineer in Charge.
46
-
10057.44
... More
Supply and fixing of T5 LEDTube Light -Wall mounted LED batten , extruded aluminium Heat sink provided for efficient heat dissipation & integrated electronic driver. (1X20W LED )complete in all aspects as per direction of Engineer in Charge
47
-
36644.02
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%