Pradhan Mantri Gram Sadak Yojana Tender

Excavation in foundation for Structure in all type of soil & rock including all lead lift and disposal of surplusmaterial as directed by Engineer in charge and Mord specification for Rural Road 2014

Construction of R. R. Stone Masonary in Cement Mortor 1:5 including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge and Mord specification for Rural Road 2014 (Bond Stone will be paid Separately)

Construction of R. R. Stone Masonary laid in Dry including bond Stone, supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge and Mord specification for Rural Road 2014

HP Stone filling in back of Structure including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge and Mord specification for Rural Road 2014

Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7

Providing and laying of Concrete for plain concrete in open foundation for structure including supply of all material labour T&P royalty etc required for proper completion of work as directed by Engineer in charge and Mord specification for Rural Road 2014 PCC grade M10

Cement plum masonry with 40% plum & 60% 1:3:6 cement concrete including supply of all material, labour, T&P etc. required for proper completion of the work. (As per PWD Uttarakhand specifications)

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS:280 and IS:4826 in 100 mm x 100 mm mesh (woven diagonally) including 10 per cent extra for laps and joints laid with stone boulders weighing not less than 25 kg each as per drawing and technical specifications Clause 1301

Providing concrete for plain/reinforced concrete in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 Nominal mix (1:2:4)

Construction of hill side drain in accordance with the requirement of specifications true to lines and grades. Dimesions and other particulars as per drawing and Technical Specification Clause 1606.1 Cement plaster 15 mm thick 1:4 on stone masonry

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1916 of MORD Specification for Rural Roads 2014

Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc.(As per PWD Uttarakhand specifications)

Construction of hill side katcha Trapezoidal Drain as per Drawing in accordance with the requirement as directed by Engineer in charge and Mord specification for Rural Road 2014

Construction of reference pillars(totally under ground) of length 200mm, width 200mm and height 300mm) as per Fig. 1600.1 (b) and Technical Specification Clause 1602.1 of MORD specifications for rural roads.

Construction of back pillars , of length 300mm, width 300mm and height 400mm of which 100 mm shall be below ground level as per Fig. 1600.1 (b) and Technical Specification Clause 1602.3 of MORD specifications for rural roads.

Construction of Job pillers of length 400mm, width 400mm and height 600mm of which 100 mm shall be below ground level as per Fig. 1600.1 (d) and Technical Specification Clause 1602.4 of MORD specifications for rural roads.

Providing and laying of Concrete for reinforced concrete for structure including supply of all material labour T&P. shuttering .Centering royalty etc required for proper completion of work as directed by Engineer in charge and Mord specification for Rural Road 2014 RCC grade M20

Supplying, fitting and placing HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202. (The reinforcement steel shall be procured from original (primary) steel producers as per clause no. 2011.3.1 of MORD specifications (First Revision'2014) and IS 1786:2008 clause no. 1.6)

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In 1:4 cement mortar

Stone masonry in cement mortar for substructure complete as per drawing & technical specification Clauses 702, 704, 1202 and 1204 In cement mortar (1:5)

Providing and laying reinforced cement concrete in superstructure as per drawing and technical specifications Clauses 800, 1205.4 and 1205.5 R.C.C grade M 25

Supplying, fitting, and placing MS bar reinforcement in superstructure complete as per drawing and technical specifications Clauses 1002, 1010 and 1202. (The reinforcement steel shall be as per clause no. 2011.3.1 of MORD specifications (First Revision'2014) and IS 1786:2008 clause no. 1.6)

Drainage spouts complete as per drawing and technical specifications Clause 1209

Tubular Steel Railing on Medium Weight Steel Channel (ISMC series) 100 mm x 50 mm Providing, fixing and erecting 50 mm dia steel pipe railing in 3 rows duly painted on medium weight steel channels (ISMC series) 100 mm x 50 mm, 1.2 m high above ground, 2 m centre-to-centre, complete as per approved drawings Clause 1706

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 Ordinary Kilometer Stone (Precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 5th Kilometre Stone (precast)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 200 m stone (precast)

Providing and Fixing 'Logo' of PMGSY Project Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges. The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level. The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1

Providing & fixing of Semi reflective Traffic Sign Boards (cautionary, mandatory & informatory) as per standard drawing duly painted and written as directed by Engineer in charge. as per IRC/ MORD Specification for Rural Roads 2014.

Providing & fixing of PMGSY Logo Board at starting point end point & every 2 Km distance of road length as per standard drawing duly painted and written and as per directed by engineer in charge/as per mord specification for rural road 2014

Providing & fixing of Citizen Information Board with PMGSY Logo at starting or prominent location (where maximum no. of citizens can view the detail of the road) as per standard drawing dully painted and written as directed by Engineer in charge/ as per MORD Specification for Rural Roads 2014.

Providing & fixing of Maintenance Board with PMGSY Logo at starting or prominent location as per attached standard drawing dully painted and written as per the MORD specification and direction of Engineer-in-charge.

Direction and place indentification sign board up to 0.9 sqm size board. Providing and erecting direction and place identifications of semi reflective sign boards as per IRC:67 made of 2 mm thick M.S. Sheet duly stove enameled paint in white colour in front and grey colour on back with red reflective border of 70 mm width and required message, letters, figures with reflective engineering grade tape as per MORD specifications of required shade and colour. Supported and welded on 47 mm x 47mm of 12 SWG Square tube of 3050 mm height duly strengthened by 25 mm x 5 mm M/s flat iron on edges on back firmly fixed to the ground by means of properly designed foundations with M-15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawing and as directed by Engineer in charge/ as per Clause 1701 of MORD Specification for Rural Roads 2014.

Providing and laying of wire crates 3.00x1.50x1.50 in size with a 8 gauge BWG GI wire conforming to IS: 280 & IS:4826 in 150mm x 150mm mesh laid with stone boulders weighing not less than 25 kg each.(As per PWD Uttarakhand Specification)

Emergency Maintenance

Deploying Hydraulic Excavators of 0.90 cum Bucket for clearance of major slip in all type of Soil, Rock and Boulders including its Operator, Fuel, all other charge and taxes required for proper completion of work.

1st year

2nd year

Major Slip clearance in all type of Soil, Rock and Boulders including cast of all material , Machine, T&P and Taxes etc required for proper completion of work as per MoRD specifications, Clause 1611

1st year

2nd year

Coolie walling including supply of all material, labour, T&P , royalty etc. required for proper completion of the work , as directed by Engineer-in-charge and as per PWD specifications 8.90 (For Opening Communication Only)

1st year

2nd year

Providing and laying of boulder apron laid in wire crates with 4 mm dia GI wire conforming to IS: 280 & IS:4826 in 100mm x 100mm mesh (woven diagonally)including 10% extra for laps and joints laid with stone boulders weighing not less than 25 kg each As per drawing and technical Specifications clause 1301

1st year

2nd year

Maintainance Activities:

Maintenance under PBMC for 1] Trimming of grass and weeds from the shoulders/berms and disposing off the same to suitable locations as per technical specifications Clause 1914. 2] Maintenance of road side Drains including minor slip clearence , reshaping ,deepening and ,regrading ,as well as catch water drains as per technical specification Clause 1907. 3]Maintenance of shoulders to the required level by filling/cutting the soil and its compacting including disposal of the surplus material in approved muck disposal points as per specification clause 1903 . 4] Maintenance of scuppers & Culverts by way of clearing, Cleaning, Erosion repair, repairs to cracks, parapet walls and Protection works as per drawing and technical specification Clasue 1908. 5] Maintenance of Causeway by way of minor Surface repairs, replacing Guide Posts, repair of flood gauges, removal of debris, providing boulders and protection work and painting as per technical specification Clause 1909. 6] Maintenance of road signs by way of cleaning and repainting of mandatory / requlatory / cautionary / informatory and place identifications sign board as per drawings and technical specification Clause 1910. 7] Maintenance of 200 metre km stone by way of refiting of tilted stones repairing with cement mortar, cleaning, repairing and lettering on 200 metre km stone and 5th km stone as per drawing and technical specification Clause 1912. 8] Two coat white washing on parapet walls of CD work ,edge stones, tree truncks, and prominent rock patches on hill sides including preparation of surface by cleaning scraping etc. as per technical specifications Clause 191.

Ist Year

Iind Year