Yamuna Expressway Industrial Development Authority Tender

... More
The YEIDA has issued a formal invitation for competitive bids for the Yamuna Expressway Industrial Development Authority project, for Development Of Work Abadi Plots Of Village- Pachokra 7 Percent ( Road,drain And Sewer In Yeida.wc-01 in Gautam Buddha Nagar, Uttar Pradesh, with an estimated contract value of Rs. 3,56,06,537. The bid opening date for this tender is 27-05-2025 and the last date for bid submission is 09-06-2025. Interested bidders for Yamuna Expressway Industrial Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Yamuna Expressway Industrial Development Authority - YEIDA Tender

Works
Civil And Construction
Agriculture or Forestry Works
Eprocure
Opening Date27 May 2025
Closing Soon9 Jun 2025
Tender Amount₹ 3,56,06,537 
Notes
Download

AI Insights

Technical Capacity
... View More
The required prior work experience for the bidder is in similar fields for the last four financial years in organized sectors. The tenderer must have experience of successfully executed work as stated below: 1. Works more than 10.00 Lacs: At least two jobs equal to the bid value. 2. Works more than 15.00 Lacs and up to 100.00 Lacs: At least two jobs equal to the bid value. 3. Works more than 100.00 Lacs and up to 2000.00 Lacs: At least two jobs equal to 75% of the bid value or one work equal to the bid value. 4. Works of 2000.00 Lacs and above: At least three works each equal to 40% of the bid value, or two works each equal to 60% of the bid value, or one work equal to 80% of the bid value. The cumulative financial turn over and current liquid assets should be as under: 1.5 Times bid value, 5% of the bid value, Rs.10.00 Lacs, 40% of the bid value for works more than Rs.10.00 Lacs & upto Rs.15.00 Lacs. 1.5 Times bid value, 10% of the bid value, Rs.15.00 Lacs, 40% of the bid value for works more than Rs.15.00 Lacs & upto Rs.100.00 Lacs. 1.5 Times bid value, 12% of the bid value, Rs.100.00 Lacs, 40% of the bid value for works more than Rs.100.00 Lacs & upto Rs.500.00 Lacs. 2.00 Times bid value, 12% of the bid value, Rs.500.00 Lacs for works of Rs.500.00 Lacs and above. The bidder should have a minimum of five years of experience and submit detailed information about their past experience and financial position, including a list of works satisfactorily completed during the last four financial years, along with an attested copy of the experience certificate. A relaxation of 20% is given to working contractors in terms of turnover and liquid assets.

Costs

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earth lead upto 50metrs. Based on UPPWD/SOR-2020/DAR-18/1.6.1

6049.11

83

-

... More
Supplying and stacking at site. 90 mm to 45 mm size stone aggregate Based on UPPWD SOR-2020/1 6.3.1

755.38

2850

-

... More
63 mm to 45 mm size stone aggregate Based on UPPWD-SOR-2020/1 6.3.2

545.07

2904

-

... More
53 mm to 22.4 mm size stone aggregate Based on UPPWD-SOR-2020/1 6.3.3

530.6

2968

-

... More
Supplying and stacking at site. Moorum. Based on UPPWD-SOR-2020/16.3.10

425.49

2935

-

... More
Laying spreading and compacting stone aggregate of specified sizes to WBM specifications including spreading in uniform thickness, hand picking, rolling with 3 wheeled road! vibratory roller 8-10 tonne in stages to proper grade and camber, applying and brooming requisite type of screening! binding material to fill up interstices of coarse aggregate watering and compacting to the required density. Based on UP PWD SOR-2020/16.4

1831.06

381

-

... More
Providing and applying tack coat on prepared surface heating bitumen in boiler and spraying the bitumen of 80/100 with spray set fitted on bitument boiler including clearing, preparing the existing road surface as per specification . On granular Base such as W.B.M. surface not bitumen primed with 0.25Kg of bitumen for 10sqm. WBM/WMM@0.25kg/sqm UPPWD/SOR-2020

5623.75

14

-

... More
Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 Based on UPPWD/SOR-2020/ DAR -18/16.7.1

2045

139

-

... More
Provinding and laying and rolling of close-graded premix surfacing material of 25mm thickness composed of 11.2mm to 0.09mm (type-b) aggregates using penetration grade bitumen to the required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a smooth wheeled rolled 8-10 tonne capacity, and finishing to required level and grade. 25mm thick compacted thickness with bitumen penrtration of VG-10

5623.75

285

-

... More
Excavation of earth in ordinary soil for laying of sewers including cutting of joints, pits, trimming, dressing, levelling, including removal of surplus earth and other dismantalled materials upto distance of 50m. From centre of trenches.

207.36

72

-

... More
Providing and carting of following dia RCC hume pipe S&S NP-3 class & specials in site of work lowering the same into trenches in depth upto 1.50m below GL true to alignment jointing with 1:2 cement mortar in coarse sand including excavation of earth below invert level of pipe. 250mm dia/UPPWD/SOR-2020

192

707

-

... More
DRAIN WORK: Excavation of earth in ordinary soil for laying of sewers including cutting of joints, pits, trimming, dressing, levelling, including removal of surplus earth and other dismantalled materials upto distance of 50m. from centre of trenches.(YEIDA ) 0.00 to 1.50 mtr

696.29

72

-

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) UPPWD/SOR-2020/281,P-17

193.15

5820

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for: Foundations, footings, bases of columns, etc. for mass concrete. Based on UPPWD/SOR-2020/DAR-18/5.9.1

699.34

181

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for: Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc. Based on UPPWD/SOR-2020/DAR-18/5.9.2

5460.46

335

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for: Suspended Floor, roofs landing, balconies, and access platform UPPWD /SOR-2020/5.9.16.2 For culvert

176.48

386

-

... More
Centering and shuttering including strutting, propping etc. and removal of form for: Edges of slabs and breaks in floors and walls. Above 20cm wide Based on UPPWD /SOR-2020/5.9.16.2

21.45

560

-

... More
Providing and laying in position machine batched and machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying but excluding the cost of centering,shuttering, finishing and reinforcement, including admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/cum.Excess/less cement used as per design mix is payable/recoverable. All work up to plinth level. Based on UPPWD/SOR-2020/DAR-18/5.33.1

858.39

7849

-

... More
Rainforcement for RCC work including straightening, cutting, bending, placing in position and binding all complete. Cold twisted bars UPPWD/SOR-2020/YEIDA/5.22.6

84229.76

92

-

... More
SEWERAGE SYSTEM excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth and dirctedby the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete (YEIDA). UPPWD/SOR-2020/YEIDA Depth from 0.00 - 1.5 m below G.L.

274.88

72

-

... More
Depth from 1.5.- 3.00m below G.L UPPWD/SOR-2020/AR/YEIDA

68.72

87

-

... More
Supply and laying of ISI marked R.C.C. NP-2 pipes of following sizes including carting, loading, unloading, at godown, including all taxes and levies & rubeer rings of following dia 250mm dia Based on UPPWD/SOR-2020/DAR-18/19.6.3

889.06

591

-

... More
Supply and laying of ISI marked R.C.C. NP-3 pipes of following sizes including carting, loading, unloading, at godown, including all taxes and levies & rubeer rings of following dia 250mm dia Based on UPPWD/SOR-2020

34.18

707

-

... More
Providing and laying in position cement concrete : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) in concrete cradle under NP-3 pipe of following diameter including centring shuttering but excluding excavation as per approved. 250mm dia UPPWD/SOR-2020

868.82

369

-

... More
Providing and laying in position cement concrete 1:4:8 (1 cement: 4 coarse sand : 8 graded stone aggregate 40mm nominal sizw) in concrete cradle under NP-3 Pipe of following diameter including centring shuttering but excluding excavation as per approved. 250mm dia UPPWD/SOR-2020

33.26

375

-

... More
Providing and laying non-pressure NP2 class (light duty) R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete : 150mm dia RCC pipe Based on UPPWD/SOR-2020/DAR/18/19.6.2

236

317

-

... More
Provinding and laying in position cement concrete 1:4:8 (1cement:4 coarse sand: 8 graded stone aggregate 40mm nominal size) in concrete cradle under NP-2 pipe of following diameter including centring shuttering but excluding excavation as per approved

208.86

218

-

... More
Construction brick masonary circular type manhole 0.91m internal dia at bottom and 0.56m dia at top with 100 class designation FPS bricks in cement mortar 1:4(1cement: 4coarse sand) inside and outside above ground level cement plaster 12mm thick with cement mortar 1:3(1cement:3coarse sand) finished with a floating coat of neat cement, foundation concrete 1:4:8(1cement:4coarse sand: 8graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete in 1:2:4(1cement:2coarse sand :4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design. 0.91m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal dia meter conforming to IS 12592. total weight of cover and frame not less than 182kg. fixed in cement concrete 1:2:4(1cement:2coarse sand:4 graded stone aggregate 20mm nominal size) including centring shuttering, Supply and fixing Poly propelene foot rest & excluding excavation all complete. UPPWD/SOR-2020/DAR-18/19.9.1.1

46

9672

-

... More
Extra depth for circular type manhole 0.91m internal dia (at bottom) beyond 0.91m to 1.67m with burnt clay brick of class designation 150.UPPWD SOR-2020/19.10.1

8.99

4890

-

... More
Constructing brick masonary circular type manhole 1.22m internal dia at bottom and 0.56m dia at top with 100class designation FPS bricks in cement mortar 1:4 (1 cement : 4 coarse sand) inside and outside above ground level cement plaster 12mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement, foundation concrete 1:3:8 (1 cement : 3 coarse sand : 8 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete in 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design.1.68 m deep with S.F.R.C cover and frame (heavy duty HD-20 grade designation) 560mm internal dia meter conforming to IS 12592. Total weight of cover and frame not less than 182 Kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including centering shuttering, Supply and fixing poly propelene foot rest & Excluding Excavation, all complete. UPPWD SOR-2020 / 19.11.1.1

2

18398

-

... More
Extra depth for circular type manhole 1.22 m internal dia (at bottom) beyond 1.68 m with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal dia meter conforming to IS 12592. Total weight of cover and frame not less than 182 kg. fixed in cement concrete 1:2:4(1cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centring shuttering, Supply and fixing poly propelene foot rest but excluding excavation all complete. UPPWD SOR-2020 / 19.12.1.1

0.46

6306

-

... More
Constructing brick masonry circular manhole 1.52m internal dia at bottom and 0.56m dia at top in cement mortar 1:4 (1 cement :4 coarse sand) inside cement plaster 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with a floating coat of neat cement foundation concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40mm nominal size) and making necessary channel in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished with a floating coat of neat cement all complete as per standard design: 2.30m deep with S.F.R.C Cover and frame (heavy duty HD-20 grade designation) 560mm internal diameter conforming to I.S. 12592, total weight of cover and frame to be not less than 182kg. fixed in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) including centering shuttering all complete. (Excavation, foot rests arid 12 mm thick cement plaster at the external surface shall be paid for separately) UPPWD SOR-2020/19.11.1.1

1

38724

-

... More
Extra Depth of 1.52 dia manhole 1.68m deep with SFRC cover and frame (heavy duty HD-20 grade designation) 560mm internal dia meter conforming to IS 12592. Total weight of cover and frame not less than 182 kg. fixed in cement concrete 1:2:4(1cement:2 coarse sand: 4 graded stone aggregate 20mm nominal size) including centring shuttering, Supply and fixing poly propelene foot rest but excluding excavation all complete. UPPWD/SOR-2020/DAR-18/19.12.1.1

0.23

14933

-

... More
Providing orange colour safety foot rest of minimum 6mm thick plastic encapsulated as per IS:10910 on 12mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mmX25mm and over all minimum length 263mm and width as 165mm with minimum 112mm space between protruded legs having 2mm tread on top surface by ribbing or chequering beside necessary and adequate anchoring projections on tail length on 138mm as per standard drawing and suitable to withstand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15cm cement concrete block 1:3:6(1cement: 3 coarse sand:6 graded stone aggregate 20mm nominal size) complete as per design.UPPWD/SOR-2020/DAR-18/19.16

140

316

-

... More
ConConstructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size ) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard designWith common burnt clay F.P.S.(non modular) bricks of class designation 150

59

6741

-

... More
Providing and fixing S.W. intercepting trap in manholes with stiff mixture of cement mortar 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete 150mm dia Based on UPPWD SOR-2020/DAR-2018/19.34.2

59

379

-

... More
Class-150(Non Modular) brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. As the item 309 above but for walls of full brick thick, add for extra labour to the rate of item no. 309

48.51

4950

-

... More
The routine maintenance of road work including embankment,Patri,road sides etc to the required standards and in the manner as defined in CB condition and keep the entire road surface and structure in defect free condition during the entire maintenance period which begins from the actual completion date and ends after five years including cost of materials T&P labouress etc,but excluding cost of GST For 2nd Year maintenance cost ( Sum of item no 1 to 12 = 15190196.14x0.0025=37975.49).

15190196.14

-

-

... More
The routine maintenance of road work including embankment,Patri,road sides etc to the required standards and in the manner as defined in CB condition and keep the entire road surface and structure in defect free condition during the entire maintenance period which begins from the actual completion date and ends after five years including cost of materials T&P labouress etc,but excluding cost of GST For 3rd Year maintenance cost ( Sum of item no 1 to 12 = 15190196.14x0.0050=75950.98).

15190196.14

-

-

... More
The routine maintenance of road work including embankment,Patri,road sides etc to the required standards and in the manner as defined in CB condition and keep the entire road surface and structure in defect free condition during the entire maintenance period which begins from the actual completion date and ends after five years including cost of materials T&P labouress etc,but excluding cost of GST For 4th Year maintenance cost ( Sum of item no 1 to 12 = 15190196.14x0.0075=113926.47).

15190196.14

-

-

... More
The routine maintenance of road work including embankment,Patri,road sides etc to the required standards and in the manner as defined in CB condition and keep the entire road surface and structure in defect free condition during the entire maintenance period which begins from the actual completion date and ends after five years including cost of materials T&P labouress etc,but excluding cost of GST For 5th Year maintenance cost ( Sum of item no 1 to 12 = 15190196.14x0.010=151901.96).

15190196.14

-

-



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements

Past Bidders
This list is curated from the bidders of the similar tenders in the past

Unlock the Tender details for free
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
  • Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
  • Awarded Ratexx%
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.