Varanasi Development Authority Tender
... More
The Varanasi Development Authority has issued a formal invitation for competitive bids for Construction Work Of Toilets, Septic Tanks, Changing Rooms And Boring Etc. At Ahirana Gali, Laxmi Ghat And Pishach Mochan. in Varanasi, Uttar Pradesh, with an estimated contract value of Rs. 35,90,000. The bid opening date for this tender is 18-03-2025 and the last date for bid submission is 08-04-2025. Interested bidders for Varanasi Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Varanasi Development Authority Tender
Civil And Construction
Building Construction
Eprocure
Opening Date18 Mar 2025
Closing Date8 Apr 2025
Tender Amount₹ 35,90,000
Costs
EMD
₹ 72,000Document Cost
₹ 3,110Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPVDA_1018983_1Bid Award Id
ViewTender No
2044(1)/VDA/NIRMAN/2024-25Tender Authority
Varanasi Development Authority ViewPurchaser Address
-Website
http://https://vdavns.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 In exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand). (DSR-2023 SI No.-6.28.2) above plinth level utpo floor V level
26.34
6593
173686.23
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts & mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overtapping of sheets complete (up to any pitch in horizontal vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cufting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m (DSR 2023 SI NO 12.1.1)
22.8
1071
24419.03
... More
P/F of 65 mm (+/- 2 mm) thick Chaunar sand stone flooring over 20 mm (average) th . Base of cement mortar 1:5 (1Cement:Coarrse sand ) with joints 3mm th side buttered with cement mortar 1:2 (1cement : 2 Stone Dust) adnixed with pigment to match the shade of stone and pointing with same mortar sand stone.(previous approved by vda)
100
1269
126900
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [DSR 2023-13.83.2]
11
104
1149.72
... More
Provinding and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of 100mm dia. (DSR-2023,23.13.`/399)
1
164
164.71
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. (DSR-2023, Sh.No. 18.48A))
500
8
4045
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2023, SI. No. 13.47.1]
13
125
1634.88
... More
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251)
17
130
2210
... More
Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. [Elect. SOR 2018, SI No. 161]
4
156
624
... More
RCC work with cement, coarse sand and 2cm gauge stone grit in the proportion of 1:1.5:3 in T-Beam and slab excluding its fixing and binding the same with 24 BWGGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 288(b)]
1.8
10100
18180
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(DSR- 2023,18.18)
-
-
-
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80]
11
114
1261.7
... More
Development of tube well in accordance with IS:2800 (part-1) and IS:11189, to establised maximum rate of useable water yiel without sand content (beyond permissible limit), with required capacity air compressor for required time till well is fully developed, measuring yiel of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well all complete including hire and labour charges of air compressor, tools and accesories etc. all as per requirement and direction of Engineer-In-charge. (DSR-2023,23.12/399)
8
797
6380.08
... More
Street light
-
-
-
... More
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 In exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand). (DSR-2023 SI No.-6.28.2) above plinth level utpo floor V level
26.34
6593
173686.23
... More
supply and fixing of 90 mm dia pvc pipe for each block (MR)
20
152
3040
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.(DSR-2023,12.22)
-
-
-
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A. [Elect. SOR 2018, SI No. 1002]
2
260
520
... More
CHANGING ROOM
-
-
-
... More
M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]
11
5500
60500
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A. [Elect. SOR 2018, SI No. 1002]
4
260
1040
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.(DSR-2023,12.22)
-
-
-
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. (DSR-2023, Sh.No. 18.48A))
500
8
4045
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2023, SI. No. 13.47.1]
13
125
1634.88
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. (DSR-2023, Sh.No. 18.48A))
500
8
4045
... More
Wiring wire 1.5 sqmm 2 core.
PSR at Rajghat Bridge file
0.2
7125
1425
... More
Provinding and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of 100mm dia. (DSR-2023,23.13.`/399)
1
164
164.71
... More
2.5 cm thick damp proof course with cement, coarse sand and 2 cm gauge stone grit in proportion in 1:1.5:3 with and including water proofing material as directed by E/I including including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 361]
16
330
5280
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A. [Elect. SOR 2018, SI No. 1002]
4
260
1040
... More
M-150 brick work in 1:4 cement and Coarse sand mortar in Super structure including necessary cutting and moulding of bricks required and for one brick thick wall including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR-2020, SI No. 305(b)+309+310]
10
6110
61100
... More
Cement Concrete with 2 cm. gauge apporved stone ballast, apporve coarse sand and cemnet in the proportion of 4:2:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 279(b)]
1.1
7100
7810
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80]
11
114
1261.7
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A. [Elect. SOR 2018, SI No. 1002]
2
260
520
... More
Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrough to required shape as necessary includind bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. [SOR 2020, SI No. 504]
4.5
6350
28575
... More
M-150 brick work in 1:4 cement and Coarse sand mortar in Super structure including necessary cutting and moulding of bricks required and for one brick thick wall including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR-2020, SI No. 305(b)+309+310]
4
6110
24440
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fitting and accesories etc. All complete for all depths, as per direction of Engineer-In-charge. 100mm nominal size dia. (DSR-2023,23.4.1/398)
20
504
10092.2
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(DSR 2023 SI NO 10.25.2)
50
126
6343
... More
providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.(DSR 2023 si no 18.45 )
1
971
971.41
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.(DSR-2023,12.22)
-
-
-
... More
Providing and fixing 250 x 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . [DSR 2023, SI No. 9.96.2]
4
191
766.16
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(DSR- 2023,18.17)
-
-
-
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [DSR 2023-13.83.2]
11
104
1149.72
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(DSR- 2023,18.18)
-
-
-
... More
Earth workin cutting or in embankment in ordinary soil excavation to be the from of regular pits not exceeding 1/2 meter (20'') in depth and earth work in enbankment to be in 20cm (8'') layers , including ramming and dressing the surface to requied levels and slopes and also including 1.5m (5') lift and 30m (100') lead.the earth from cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I and cartage of 8km. including loading and unloading. [SOR 2020, SI No. 253+231(a)]
4
298
1194
... More
Providing and fixing of 125 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete [DSR 2023, SI No. 9.100.1]
4
48
194.76
... More
2.5 cm thick damp proof course with cement, coarse sand and 2 cm gauge stone grit in proportion in 1:1.5:3 with and including water proofing material as directed by E/I including including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 361]
16
330
5280
... More
Concrete with 4 cm.gauge stone ballast, coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 281]
6
5550
33300
... More
M-150 brick work in 1:4 cement and Coarse sand mortar in Super structure including necessary cutting and moulding of bricks required and for one brick thick wall including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR-2020, SI No. 305(b)+309+310]
4
6110
24440
... More
Cement Concrete with 2 cm. gauge apporved stone ballast, apporve coarse sand and cemnet in the proportion of 4:2:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 279(b)]
1.1
7100
7810
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A. [Elect. SOR 2018, SI No. 1002]
4
260
1040
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore(DSR- 2023,18.50.1)
2
603
1206.42
... More
M-150 brick work in 1:4 cement and Coarse sand mortar in Super structure including necessary cutting and moulding of bricks required and for one brick thick wall including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR-2020, SI No. 305(b)+309+310]
10
6110
61100
... More
providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.(DSR 2023 si no 18.45 )
1
971
971.41
... More
20 mm nominal outer dia Pipes18.7.3
10
186
1860
... More
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 In exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand). (DSR-2023 SI No.-6.28.2) above plinth level utpo floor V level
15
6593
98906.4
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fitting and accesories etc. All complete for all depths, as per direction of Engineer-In-charge. 100mm nominal size dia. (DSR-2023,23.4.1/398)
20
504
10092.2
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore(DSR- 2023,18.53.1)
2
422
844.22
... More
S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. Cat-A. [Elect. SOR 2018, SI No. 1022]
4
1240
4960
... More
Providing and fixing of 125 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete [DSR 2023, SI No. 9.100.1]
4
48
194.76
... More
Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. [Elect. SOR 2018, SI No. 161]
2
156
312
... More
2.5 cm thick damp proof course with cement, coarse sand and 2 cm gauge stone grit in proportion in 1:1.5:3 with and including water proofing material as directed by E/I including including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 361]
7
330
2310
... More
Providing and fixing M.S. Clamp of required dia to the top of casing/housing pipe of tube well as per IS:2800 (part 1), including necessary boilt and nuts of requires size complete. 100mm clamp (DSR-2023,23.14.1/399)
1
1404
1404.88
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore(DSR- 2023,18.50.1)
2
603
1206.42
... More
Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. [Elect. SOR 2018, SI No. 161]
2
156
312
... More
12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]
110
175
19250
... More
Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. [Elect. SOR 2018, SI No. 161]
4
156
624
... More
M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]
11
5500
60500
... More
25mm nominal outer dia Pipes18.7.4
10
228
2280
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2023, SI. No. 13.47.1]
13
125
1634.88
... More
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box , piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as directed. [Elect. SOR 2018, SI No. 138(C)]
2
610
1220
... More
Providing and fixing of 200 x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. [DSR 2023, SI No. 9.97.3]
4
73
293.12
... More
Providing and laying of Glazed vitrified tiles matt/Antiskid finish of size with including all complete work(DSR2023 SI NO 11.41A.3.1)
20
1076
21533.2
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(DSR 2023 SI NO 10.25.2)
50
126
6343
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. etc, complete in all respect. [Elect. SOR 2018, SI No. 1301(C)]
10
124
1240
... More
S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. Cat-A. [Elect. SOR 2018, SI No. 1022]
4
1240
4960
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (±0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
3.5
2167
7586.43
... More
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251)
36
130
4680
... More
BORING WORK
-
-
-
... More
Earth workin cutting or in embankment in ordinary soil excavation to be the from of regular pits not exceeding 1/2 meter (20'') in depth and earth work in enbankment to be in 20cm (8'') layers , including ramming and dressing the surface to requied levels and slopes and also including 1.5m (5') lift and 30m (100') lead.the earth from cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I and cartage of 8km. including loading and unloading. [SOR 2020, SI No. 253+231(a)]
4
298
1194
... More
Earth workin cutting or in embankment in ordinary soil excavation to be the from of regular pits not exceeding 1/2 meter (20'') in depth and earth work in enbankment to be in 20cm (8'') layers , including ramming and dressing the surface to requied levels and slopes and also including 1.5m (5') lift and 30m (100') lead.the earth from cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I and cartage of 8km. including loading and unloading. [SOR 2020, SI No. 253+231(a)]
4
298
1194
... More
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box , piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as directed. [Elect. SOR 2018, SI No. 138(C)]
2
610
1220
... More
12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]
89
175
15575
... More
M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]
11
5500
60500
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [DSR 2023-13.83.2]
25
104
2613
... More
RCC work with cement, coarse sand and 2 cm gauge stone grit in the proportion of 1:1.5:3 in Lighter beams excluding its fixing and binding the same with 24 BW GGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 285(b)]
2
9550
19100
... More
S&F of 63 Amp. 415 V metal clad T.P. reqireable type switch fuse unit on angle iron bracket complete in all respect
CAB - B
SOR 2018 SI No. 312
1
3840
3840
... More
12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]
110
175
19250
... More
S&F of 6 Amp to 32 Amp. SPMCB (10 KA) C Curve Cat-A. [Elect. SOR 2018, SI No. 1002]
2
260
520
... More
Providing and fixing 250 x 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . [DSR 2023, SI No. 9.96.2]
2
191
383.08
... More
20 mm nominal bore18.18.3
1
341
341.08
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2023, SI. No. 13.47.1]
11
125
1383.36
... More
Gravel packing in tube well construction in accordance with IS:4097, including providing gravel fine/medium/coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineer-In-charge, (DSR-2023,23.8/398)
5.58
1782
9944.62
... More
Boring/drilling bore well of requiured dia. For casing/strainer pipe, by suitable method prescribed in IS:2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer-In-charge, upto 90m depth below ground level. All type of soil. 300mm dia.(DSR-2023,23.1.1.1)
90
520
46817.1
... More
2.5 cm thick damp proof course with cement, coarse sand and 2 cm gauge stone grit in proportion in 1:1.5:3 with and including water proofing material as directed by E/I including including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 361]
7
330
2310
... More
RCC work with cement, coarse sand and 2 cm gauge stone grit in the proportion of 1:1.5:3 in Lighter beams excluding its fixing and binding the same with 24 BW GGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 285(b)]
2
9550
19100
... More
Providing and laying of Glazed vitrified tiles matt/Antiskid finish of size with including all complete work(DSR2023 SI NO 11.41A.3.1)
14
1076
15073.24
... More
Providing and laying of Glazed vitrified tiles matt/Antiskid finish of size with including all complete work(DSR2023 SI NO 11.41A.3.1)
14
1076
15073.24
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2023, SI. No. 13.47.1]
11
125
1383.36
... More
Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrough to required shape as necessary includind bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. [SOR 2020, SI No. 504]
4.5
6350
28575
... More
providing and placing in position hand pump of approved quality for 40 mm diameter G.I. pipe complete with all accessories.(DSR 2023 si no 18.45 )
1
971
971.41
... More
Providing and fixing 250 x 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . [DSR 2023, SI No. 9.96.2]
2
191
383.08
... More
Wiring wire 1.5 sqmm 2 core.
PSR at Rajghat Bridge file
0.2
7125
1425
... More
Providing and laying of Glazed vitrified tiles matt/Antiskid finish of size with including all complete work(DSR2023 SI NO 11.41A.3.1)
20
1076
21533.2
... More
S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.
As per UPPCL
4
838
3352
... More
20 mm nominal bore18.18.3
1
341
341.08
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts & mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overtapping of sheets complete (up to any pitch in horizontal vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cufting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m (DSR 2023 SI NO 12.1.1)
11
1071
11781.11
... More
Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrough to required shape as necessary includind bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. [SOR 2020, SI No. 504]
2.36
6350
14973.3
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire and labour charges, fitting and accesories etc. All complete for all depths, as per direction of Engineer-In-charge. 100mm nominal size dia. (DSR-2023,23.4.1/398)
20
504
10092.2
... More
Boring/drilling bore well of requiured dia. For casing/strainer pipe, by suitable method prescribed in IS:2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer-In-charge, upto 90m depth below ground level. All type of soil. 300mm dia.(DSR-2023,23.1.1.1)
90
520
46817.1
... More
Providing and fixing of 200 x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. [DSR 2023, SI No. 9.97.3]
4
73
293.12
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore(DSR- 2023,18.53.1)
2
422
844.22
... More
Providing and Installation of 1 H.P. /0.75 K.W. submersible pump including 2.5 Sq.mm three core Cable, 100mm dia Reliance Pipe 100m, starter for motor etc. complete. (CMR)
1
43623
43623.36
... More
RCC work with cement, coarse sand and 2cm gauge stone grit in the proportion of 1:1.5:3 in T-Beam and slab excluding its fixing and binding the same with 24 BWGGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 288(b)]
1.8
10100
18180
... More
Provinding and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/casing pipe, removable as per requirement, all complete for bore well of 100mm dia. (DSR-2023,23.13.`/399)
1
164
164.71
... More
S/F of 7 mtr. GI octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 mtr. Length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect.
SOR 2018 SI No. 641
2
16500
33000
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts & mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overtapping of sheets complete (up to any pitch in horizontal vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cufting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m (DSR 2023 SI NO 12.1.1)
22.8
1071
24419.03
... More
Wiring wire 1.5 sqmm 2 core.
PSR at Rajghat Bridge file
0.2
7125
1425
... More
Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. [Elect. SOR 2018, SI No. 161]
2
156
312
... More
Providing and Installation of 1 H.P. /0.75 K.W. submersible pump including 2.5 Sq.mm three core Cable, 100mm dia Reliance Pipe 100m, starter for motor etc. complete. (CMR)
1
43623
43623.36
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore(DSR- 2023,18.53.1)
2
422
844.22
... More
RCC work with cement, coarse sand and 2 cm gauge stone grit in the proportion of 1:1.5:3 in Lighter beams excluding its fixing and binding the same with 24 BW GGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 285(b)]
2
9550
19100
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. etc, complete in all respect. [Elect. SOR 2018, SI No. 1301(C)]
10
124
1240
... More
Providing corrugated G.S. sheet roofing including vertical/curved surface fixed with polymer coated Jor L hooks, bolts and nuts & mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overtapping of sheets complete (up to any pitch in horizontal vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cufting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m (DSR 2023 SI NO 12.1.1)
11
1071
11781.11
... More
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box , piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as directed. [Elect. SOR 2018, SI No. 138(C)]
4
610
2440
... More
12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]
89
175
15575
... More
Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrough to required shape as necessary includind bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. [SOR 2020, SI No. 504]
2.36
6350
14973.3
... More
S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.
As per UPPCL
4
838
3352
... More
BORING WORK
-
-
-
... More
Providing and fixing M.S. Clamp of required dia to the top of casing/housing pipe of tube well as per IS:2800 (part 1), including necessary boilt and nuts of requires size complete. 100mm clamp (DSR-2023,23.14.1/399)
1
1404
1404.88
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :(DSR- 2023,18.18)
-
-
-
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (±0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
3.5
2167
7586.43
... More
2.5 cm thick damp proof course with cement, coarse sand and 2 cm gauge stone grit in proportion in 1:1.5:3 with and including water proofing material as directed by E/I including including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 361]
7
330
2310
... More
M-150 brick work in 1:4 cement and Coarse sand mortar in Super structure including necessary cutting and moulding of bricks required and for one brick thick wall including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR-2020, SI No. 305(b)+309+310]
10
6110
61100
... More
a) 110mm
2
219
438.42
... More
S/F of 7 mtr. GI octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 mtr. Length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect.
SOR 2018 SI No. 641
2
16500
33000
... More
Street light
-
-
-
... More
RCC work with cement, coarse sand and 2cm gauge stone grit in the proportion of 1:1.5:3 in T-Beam and slab excluding its fixing and binding the same with 24 BWGGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 288(b)]
1.8
10100
18180
... More
25mm nominal outer dia Pipes18.7.4
10
228
2280
... More
Electric work
-
-
-
... More
Providing fixxing water closet squatting pan (indian type WC pan) with 100mm sand cast iron p or s trap. 10 liter low level with PVC flusing cistern including flush pipe with manually controlled device (handle lever) confarming to IS: 7231 with all fitting and fixtures complete inluding cutting and making good the wall and floers wherever requerd . White vitrous china orissa pattern WC pan of size 580*440 mm with intarnal type foot rest .SOR 2020 IT.17.1
2
3160
6320
... More
Providing and fixing M.S. Clamp of required dia to the top of casing/housing pipe of tube well as per IS:2800 (part 1), including necessary boilt and nuts of requires size complete. 100mm clamp (DSR-2023,23.14.1/399)
1
1404
1404.88
... More
20 mm nominal bore18.18.3
1
341
341.08
... More
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 In exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand). (DSR-2023 SI No.-6.28.2) above plinth level utpo floor V level
17.56
6593
115786.43
... More
Changing Room Work
-
-
-
... More
S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. Cat-A. [Elect. SOR 2018, SI No. 1022]
4
1240
4960
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (±0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
6.5
2167
14089.08
... More
S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. Cat-A. [Elect. SOR 2018, SI No. 1022]
2
1240
2480
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80]
60
114
6882
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm). [DSR 2023, SI. No. 13.47.1]
11
125
1383.36
... More
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box , piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as directed. [Elect. SOR 2018, SI No. 138(C)]
4
610
2440
... More
Providing and fixing of 125 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete [DSR 2023, SI No. 9.100.1]
2
48
97.38
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [DSR 2023-13.83.2]
25
104
2613
... More
Concrete with 4 cm.gauge stone ballast, coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 281]
3
5550
16650
... More
Providing and laying of Glazed vitrified tiles matt/Antiskid finish of size with including all complete work(DSR2023 SI NO 11.41A.3.1)
14
1076
15073.24
... More
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box , piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as directed. [Elect. SOR 2018, SI No. 138(C)]
2
610
1220
... More
Gravel packing in tube well construction in accordance with IS:4097, including providing gravel fine/medium/coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineer-In-charge, (DSR-2023,23.8/398)
5.58
1782
9944.62
... More
M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]
14
5500
77000
... More
Pisachmochan - Toilet, Septic Tank, Changing Room and Boring Work.
-
-
-
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc
6sqmm × 3 core
SOR 2018 SI No. 501 (e)
60
284
17040
... More
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 In exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand). (DSR-2023 SI No.-6.28.2) above plinth level utpo floor V level
17.56
6593
115786.43
... More
Providing and fixing of 200 x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. [DSR 2023, SI No. 9.97.3]
4
73
293.12
... More
Electric work
-
-
-
... More
BORING WORK
-
-
-
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. etc, complete in all respect. [Elect. SOR 2018, SI No. 1301(C)]
10
124
1240
... More
RCC work with cement, coarse sand and 2 cm gauge stone grit in the proportion of 1:1.5:3 in Lighter beams excluding its fixing and binding the same with 24 BW GGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 285(b)]
2
9550
19100
... More
20 mm nominal outer dia Pipes18.7.3
10
186
1860
... More
S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. Cat-A. [Elect. SOR 2018, SI No. 1022]
2
1240
2480
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80]
60
114
6882
... More
12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]
89
175
15575
... More
RCC work with cement, coarse sand and 2 cm gauge stone grit in the proportion of 1:1.5:3 in Lighter beams excluding its fixing and binding the same with 24 BW GGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 285(b)]
2
9550
19100
... More
Providing and fixing of 200 x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. [DSR 2023, SI No. 9.97.3]
2
73
146.56
... More
Supply, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings and accesories etc. all complete, for all depths as per direction of Engineer-In-charge. 100mm nominal size dia.(DSR-2023,23.3.1/397)
70
494
34589.8
... More
Wiring point for light with 1.5 sq. mm.FRLSH PVC insulated multistrand single core copper conductor cable in PVC conduit with 1.5 sq. mm.FRLSH PVC insulated multistrand copper conductor cable as earthwire drawn inside the conduit. , GP Box , piano type switch and ceiling rose/angle/ batten holder on 3 mm. thick phenolic laminated backelite-sheet etc. complete in all respect, as directed. [Elect. SOR 2018, SI No. 138(C)]
4
610
2440
... More
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251)
36
130
4680
... More
Concrete with 4 cm.gauge stone ballast, coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 281]
3
5550
16650
... More
25 mm nominal bore18.17.2
1
506
506.85
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore(DSR- 2023,18.52.1)
2
492
985.56
... More
Providing and fixing of 125 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete [DSR 2023, SI No. 9.100.1]
4
48
194.76
... More
Laxmi Ghat -Toilet, Septic Tank, Changing Room and Boring Work.
-
-
-
... More
25 mm nominal bore18.17.2
1
506
506.85
... More
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251)
36
130
4680
... More
Providing and fixing 250 x 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . [DSR 2023, SI No. 9.96.2]
4
191
766.16
... More
S&F of 63 Amp. 415 V metal clad T.P. reqireable type switch fuse unit on angle iron bracket complete in all respect
CAB - B
SOR 2018 SI No. 312
1
3840
3840
... More
a) 110mm
2
219
438.42
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (±0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
3.5
2167
7586.43
... More
Providing and fixing 250 x 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . [DSR 2023, SI No. 9.96.2]
2
191
383.08
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. etc, complete in all respect. [Elect. SOR 2018, SI No. 1301(C)]
10
124
1240
... More
Supply, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings and accesories etc. all complete, for all depths as per direction of Engineer-In-charge. 100mm nominal size dia.(DSR-2023,23.3.1/397)
70
494
34589.8
... More
Earth workin cutting or in embankment in ordinary soil excavation to be the from of regular pits not exceeding 1/2 meter (20'') in depth and earth work in enbankment to be in 20cm (8'') layers , including ramming and dressing the surface to requied levels and slopes and also including 1.5m (5') lift and 30m (100') lead.the earth from cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I and cartage of 8km. including loading and unloading. [SOR 2020, SI No. 253+231(a)]
18
298
5373
... More
M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]
14
5500
77000
... More
Providing fixxing water closet squatting pan (indian type WC pan) with 100mm sand cast iron p or s trap. 10 liter low level with PVC flusing cistern including flush pipe with manually controlled device (handle lever) confarming to IS: 7231 with all fitting and fixtures complete inluding cutting and making good the wall and floers wherever requerd . White vitrous china orissa pattern WC pan of size 580*440 mm with intarnal type foot rest .SOR 2020 IT.17.1
2
3160
6320
... More
Electric work
-
-
-
... More
25 mm nominal bore18.17.2
1
506
506.85
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect
CAT - AA
SOR 2018 SI No. 1424
2
5200
10400
... More
15 mm nominal outer dia Pipes18.8.1
15
154
2310
... More
Boring/drilling bore well of requiured dia. For casing/strainer pipe, by suitable method prescribed in IS:2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire and running charges of all equipments, tools, plants and machineries required for the job, all complete as per direction of Engineer-In-charge, upto 90m depth below ground level. All type of soil. 300mm dia.(DSR-2023,23.1.1.1)
90
520
46817.1
... More
a) 110mm
2
219
438.42
... More
Providing and Installation of 1 H.P. /0.75 K.W. submersible pump including 2.5 Sq.mm three core Cable, 100mm dia Reliance Pipe 100m, starter for motor etc. complete. (CMR)
1
43623
43623.36
... More
25mm nominal outer dia Pipes18.7.4
10
228
2280
... More
Gravel packing in tube well construction in accordance with IS:4097, including providing gravel fine/medium/coarse, in required grading and sizes as per actual requirement, all complete as per direction of Engineer-In-charge, (DSR-2023,23.8/398)
5.58
1782
9944.62
... More
Providing and laying of Glazed vitrified tiles matt/Antiskid finish of size with including all complete work(DSR2023 SI NO 11.41A.3.1)
20
1076
21533.2
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (±0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
6.5
2167
14089.08
... More
Providing and fixing 250 x 16 mm size aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete . [DSR 2023, SI No. 9.96.2]
4
191
766.16
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(DSR 2023 SI NO 10.25.2)
70
126
8880.2
... More
Cement Concrete with 2 cm. gauge apporved stone ballast, apporve coarse sand and cemnet in the proportion of 4:2:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 279(b)]
1.1
7100
7810
... More
M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)]
14
5500
77000
... More
Providing and fixing of 125 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete [DSR 2023, SI No. 9.100.1]
2
48
97.38
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [DSR 2023-13.83.2]
25
104
2613
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. (DSR-2023, Sh.No. 18.48A))
500
8
4045
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect
CAT - AA
SOR 2018 SI No. 1424
2
5200
10400
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc
6sqmm × 3 core
SOR 2018 SI No. 501 (e)
60
284
17040
... More
24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (±0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (±0.1 mm) wall thickness. The lock rail made up of 'H' section, a uPVC hollow section of size 100x24 mm and 2 mm (±0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. 'U' cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer's specification and direction of Engineer-in-charge. (For W.C. and bathroom door shutter).
6.5
2167
14089.08
... More
P/F of 65 mm (+/- 2 mm) thick Chaunar sand stone flooring over 20 mm (average) th . Base of cement mortar 1:5 (1Cement:Coarrse sand ) with joints 3mm th side buttered with cement mortar 1:2 (1cement : 2 Stone Dust) adnixed with pigment to match the shade of stone and pointing with same mortar sand stone.(previous approved by vda)
100
1269
126900
... More
Providing and fixing Bail plug/Bottom plug of reqired dia to the bottom of pipe assembly of tubewell as per IS:2800 (part 1) (DSR-2023,23.15.1/399)
1
194
194.85
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore(DSR- 2023,18.52.1)
2
492
985.56
... More
Street light
-
-
-
... More
20 mm nominal outer dia Pipes18.7.3
10
186
1860
... More
Wall painting two coats with premium acrylic emulsion paint of interior grade,having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. [DSR 2023-13.83.2]
11
104
1149.72
... More
Development of tube well in accordance with IS:2800 (part-1) and IS:11189, to establised maximum rate of useable water yiel without sand content (beyond permissible limit), with required capacity air compressor for required time till well is fully developed, measuring yiel of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well all complete including hire and labour charges of air compressor, tools and accesories etc. all as per requirement and direction of Engineer-In-charge. (DSR-2023,23.12/399)
8
797
6380.08
... More
Concrete with 4 cm.gauge stone ballast, coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 281]
6
5550
33300
... More
M-150 brick work in 1:4 cement and Coarse sand mortar in Super structure including necessary cutting and moulding of bricks required and for one brick thick wall including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR-2020, SI No. 305(b)+309+310]
4
6110
24440
... More
Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.(DSR 2023 SI NO 10.25.2)
70
126
8880.2
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80]
60
114
6882
... More
Electric work
-
-
-
... More
Earth workin cutting or in embankment in ordinary soil excavation to be the from of regular pits not exceeding 1/2 meter (20'') in depth and earth work in enbankment to be in 20cm (8'') layers , including ramming and dressing the surface to requied levels and slopes and also including 1.5m (5') lift and 30m (100') lead.the earth from cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I and cartage of 8km. including loading and unloading. [SOR 2020, SI No. 253+231(a)]
18
298
5373
... More
Electric work
-
-
-
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(DSR- 2023,18.17)
-
-
-
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 15 mm nominal bore(DSR- 2023,18.52.1)
2
492
985.56
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc
6sqmm × 3 core
SOR 2018 SI No. 501 (e)
60
284
17040
... More
supply and fixing of 90 mm dia pvc pipe for each block (MR)
20
152
3040
... More
Supply, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS:12818, including required hire and labour charges, fittings and accesories etc. all complete, for all depths as per direction of Engineer-In-charge. 100mm nominal size dia.(DSR-2023,23.3.1/397)
70
494
34589.8
... More
2.5 cm thick damp proof course with cement, coarse sand and 2 cm gauge stone grit in proportion in 1:1.5:3 with and including water proofing material as directed by E/I including including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 361]
16
330
5280
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(DSR- 2023,18.7
-
-
-
... More
RCC work with cement, coarse sand and 2 cm gauge stone grit in the proportion of 1:1.5:3 in Lighter beams excluding its fixing and binding the same with 24 BW GGl binding wire and including necessary centering and shuttering etc and also including supply of all materials required for proper completion of the work. Binding wire tobe supplied by the contractor free of cost. [SOR 2020, SI No. 285(b)]
2
9550
19100
... More
S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.
As per UPPCL
4
838
3352
... More
Earth workin cutting or in embankment in ordinary soil excavation to be the from of regular pits not exceeding 1/2 meter (20'') in depth and earth work in enbankment to be in 20cm (8'') layers , including ramming and dressing the surface to requied levels and slopes and also including 1.5m (5') lift and 30m (100') lead.the earth from cutting to be used in making embankent or to be deposited as spoil banks within 30m (100') distance as directed by the E/I and cartage of 8km. including loading and unloading. [SOR 2020, SI No. 253+231(a)]
18
298
5373
... More
Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrough to required shape as necessary includind bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. [SOR 2020, SI No. 504]
4.5
6350
28575
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. (DSR-2023, Sh.No. 18.48A))
500
8
4045
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respect
CAT - AA
SOR 2018 SI No. 1424
2
5200
10400
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80]
11
114
1261.7
... More
Electric work
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(DSR- 2023,18.7
-
-
-
... More
Providing and fixing of 200 x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. [DSR 2023, SI No. 9.97.3]
2
73
146.56
... More
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251)
17
130
2210
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. etc, complete in all respect. [Elect. SOR 2018, SI No. 1301(C)]
10
124
1240
... More
Brick work with common burnt clay machine moulded modular bricks of class designation 12.5 In exposed brick work including making horizontal and vertical grooves 10 mm wide 12 mm deep complete in cement mortar 1:6 (1 cement: 6 coarse sand). (DSR-2023 SI No.-6.28.2) above plinth level utpo floor V level
10
6593
65937.6
... More
Ahirana Gali- Toilet, Septic Tank, Changing Room and Boring Work.
-
-
-
... More
S/F of 7 mtr. GI octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 mtr. Length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect.
SOR 2018 SI No. 641
2
16500
33000
... More
Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.
15 mm nominal bore(DSR- 2023,18.50.1)
2
603
1206.42
... More
Mild steel or iron in plain work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrough to required shape as necessary includind bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. [SOR 2020, SI No. 504]
4
6350
25400
... More
15 mm nominal outer dia Pipes18.8.1
15
154
2310
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.Internal work - Exposed on wall(DSR- 2023,18.7
-
-
-
... More
Providing and fixing Bail plug/Bottom plug of reqired dia to the bottom of pipe assembly of tubewell as per IS:2800 (part 1) (DSR-2023,23.15.1/399)
1
194
194.85
... More
S&F surface/flush mounting 4 ways SPN distribution board without MCB complete in all respect,as directed at site by Engineer in charge. Cat-A. [Elect. SOR 2018, SI No. 1022]
2
1240
2480
... More
supply and fixing of 90 mm dia pvc pipe for each block (MR)
20
152
3040
... More
Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI: 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support Including fittings & fixtures for tank shall be paid separately. (DSR-2023, Sh.No. 18.48A))
500
8
4045
... More
Concrete with 4 cm.gauge stone ballast, coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 281]
3
5550
16650
... More
Changing Room Work
-
-
-
... More
P/F of 65 mm (+/- 2 mm) thick Chaunar sand stone flooring over 20 mm (average) th . Base of cement mortar 1:5 (1Cement:Coarrse sand ) with joints 3mm th side buttered with cement mortar 1:2 (1cement : 2 Stone Dust) adnixed with pigment to match the shade of stone and pointing with same mortar sand stone.(previous approved by vda)
100
1269
126900
... More
Providing and fixing of 200 x10 mm size aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete. [DSR 2023, SI No. 9.97.3]
2
73
146.56
... More
Providing fixxing water closet squatting pan (indian type WC pan) with 100mm sand cast iron p or s trap. 10 liter low level with PVC flusing cistern including flush pipe with manually controlled device (handle lever) confarming to IS: 7231 with all fitting and fixtures complete inluding cutting and making good the wall and floers wherever requerd . White vitrous china orissa pattern WC pan of size 580*440 mm with intarnal type foot rest .SOR 2020 IT.17.1
2
3160
6320
... More
Supply and wiring of submain with two number 2.5 sq.mm. FRLSH PVC insulated 1100 V grade multistrand single core copper conductor cable t in 20mm dia. heavy duty (2mm thick) PVC conduit with one number 1.5 sq. mm FRLSH PVC insulated 1100 V grade multistrand copper conductor cable as earth continuity wire drawn inside the conduit. etc, complete in all respect. [Elect. SOR 2018, SI No. 1301(C)]
10
124
1240
... More
S&F of 63 Amp. 415 V metal clad T.P. reqireable type switch fuse unit on angle iron bracket complete in all respect
CAB - B
SOR 2018 SI No. 312
1
3840
3840
... More
15 mm nominal outer dia Pipes18.8.1
15
154
2310
... More
Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251)
17
130
2210
... More
Development of tube well in accordance with IS:2800 (part-1) and IS:11189, to establised maximum rate of useable water yiel without sand content (beyond permissible limit), with required capacity air compressor for required time till well is fully developed, measuring yiel of well by "V" notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, i/c disinfection of tube well all complete including hire and labour charges of air compressor, tools and accesories etc. all as per requirement and direction of Engineer-In-charge. (DSR-2023,23.12/399)
8
797
6380.08
... More
12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584]
110
175
19250
... More
Providing and fixing of 125 mm size aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete [DSR 2023, SI No. 9.100.1]
2
48
97.38
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :(DSR- 2023,18.17)
-
-
-
... More
Supply and fixing of switch box 175 x 100 x 50 mm size of approved make made up of 1.0 mm thick ISI Marked G.P.sheet All 4 corners folded & spot welded for screw and holes plugged with PVC Nylon Caps . Two or more holes for pipe entry of 25.4 mm on upper and lower sides of the box. Holes shuld be semi-shuttered type and fitted with heavy brass Earth Piller duly screwed & brand name should be embossed. Box flushed in wall including cutting of brick work, fixing it to the level with cement sand mortar, including matching colour wash with supply of all materials, labour and T&P required for proper completion of work as directed at site by the Engineer in charge. [Elect. SOR 2018, SI No. 161]
4
156
624
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements