Uttar Pradesh State Agricultural Produce Markets Board

Finishing walls with acrylic emulsion paint of approved brand and manufacture and of required shade and undacorated wall surface to give even shade over including curing and cost of all material, labor, T&P etc. required for proper completion of work.for two coat. (Page 41 Item 30 NEW)

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured upto floor to level. SI 504 (Bulandshahar)

12mm Cement plaster in single coat of fair side of single of half brick wall for interior plastering upto floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm. In girth and finished even and smooth No. extra for mixing any additive. (II) 1 cement : 4 Coarse sand SI 584-II

Providing and filling in position bitumen mixfiller of proportion 80kg of hot bitumen, 1kg of cement and 0.025 Cu.M. of coarse sand in expansion joints in width upto 2.5 cm, depth upto 15cm. Including cost of materials but including cost of fuel. (Chapter 11 Item 3 NEW)

Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. SI 305

Supply Installation of nest-in modular toilet unit steel super structure with all accessories 6x4 fet-2 single unit in a row (twin) including overhead tank frame with overhead tank of 200 litre per seat, one washbasin, civil foundation twin leach pit for wast management, electrical and plumbing works, tow orissa ceramic pan with cistern flush and two ceramic urinal complete work as per Direction of E/I (Tata steel co. Or equivalent) As per Cheif Engineer Mandi Parishad Letter No- 720 dated 01.03.2019

Cast Cement concrete door sills, chaukhats, boundry posts, shelves and similar small work with cement, approved coarse sand and 2cm gauge stone grit in proportions of 1:2:4 including its fixing and binding the same with 24 B.W.G.G.I., binding wire, moulds, all materials labour, Tools & Plants etc. required for proper completion of the work. The rate excludes making of drip course which shall be paid extra. SI 282

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m from the foundation trenches. (Rate including Royalty of earth also) SI 251

Providing laying, 7.5cm thick spreading and compactong stone aggregates of specific sizes to water bound uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber applying and brooming, crushable screening to full up the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per technical specification clause 405. (page No 4-14)

Applying Painting & Varnishing priming coat & Two Coat over new steel and other metal surface upto 10cm. In width or girth or small not exceeding 0.10 Sq.M. area after and including preparing the surface by thoroughly clearing oil, grease, dirt and other foreign matter and scoured with wire brushed, fine steel/wood. Scrapper, sand papering and knotting including cost of all materials, labour T&P etc. required for proper completion of work. chapter 641+2A+642)

R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportion 1:1½:3 (One part of Cement, one and half Part of Coarse Sand and three Part of 2cm Stone Grit) in SLAB of doors and windows excluding supply of reinforcement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc and also including supply of all materials labour and tools and plants etc. required to proper completion of the work/strength of the concrete shell not be less than M-15 grade. SI 284 A

Supply and filling of good quality of Earth Carted upto 5.00 Km distance Complete Work. (ANALYSIS)

R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportion 1:1½:3 (One part of Cement, one and half Part of Coarse Sand and Three Part of 2cm Stone Grit) in Column of doors and windows excluding supply of reinforcement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc and also including supply of all materials labour and tools and plants etc. required to proper completion of the work/strength of the concrete shell not be less than M-15 grade. SI 289

R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportion 1:1½:3 (One part of Cement, one and half Part of Coarse Sand and Three Part of 2cm Stone Grit) in Lighter Beem of doors and windows excluding supply of reinforcement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc and also including supply of all materials labour and tools and plants etc. required to proper completion of the work/strength of the concrete shell not be less than M-15 grade. SI 285

Providing and laying cement concrete in 1:2:4 of not less than strength of M-150 Stone ballast (20 mm nominal size) approved coarse sand and cement, curing complete, Including cost of form work. In Foundation and floors. SI 279 A

Class-150 (Non Modular) brick work in 1:6 cement and Coarse sand mortar in foundation and plinth including supply of all material, labour and T&P etc. required for proper completion of the work. SI 303

Finishing wall with sandex matt proof cement paint over a priming coat of water proof cement paint of approved quality such as super snowcem durocem super quality of required shade on Undercorted wall old surface to give an even shade after throughtout brushing the surface to remove all dist and remains fo loose powdered material including curing and cost of all materials labour, T&P etc. complete. (Page 40 Item 21 NEW)

Laying of I shaped precast Interlocking tiles of thickness 80mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. Including VAT (Rubber molded) CHAPTER 20 ITEM NO 15

Class-150 (Non Modular) brick work in 1:4 cement and Coarse sand mortar in Super Structure including supply of all material, labour and T&P etc. required for proper completion of the work. (SI 305+309) One Brick Thick wall

R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportion 1:2:4 (One part of Cement, Two Part of Coarse Sand and Four Part of 2cm Stone Grit) in slab of doors and windows excluding supply of reinforcement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc and also including supply of all materials labour and tools and plants etc. required to proper completion of the work/strength of the concrete shell not be less than M-15 grade. SI 284

Providing and laying cement concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40mm nominal size) and curing complete, including cost of form work. In Foundation and floors. (Fine sand not less than in 1.25 FM) SI 273

R.C.C. work with cement approved coarse sand and 2cm (3/4") gauge approved stone ballast in the proportion 1:1½:3 (One part of Cement, one and half Part of Coarse Sand and Three Part of 2cm Stone Grit) in Raft Foundation of doors and windows excluding supply of reinforcement and its bending and including its fixing and binding the same with 24 BWGI binding wire and including necessary centering and shuttering etc and also including supply of all materials labour and tools and plants etc. required to proper completion of the work/strength of the concrete shell not be less than M-15 grade. SI 287

Providing laying, 7.5cm thick spreading and compactong stone aggregates of specific sizes to water bound macadam specification including speading in uniform thickness, hand packing, rolling with three wheel roller 80-100 KN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 2 as per Technical Specification Clause 405.

Providing and fixing OF SELF SUPPORTED ARC TYPE ROOFING with colour coated impoted galvalume sheet as per ASTM international standards A792, basemrtel thickness 1.00mm and total 1.07mm thick with tolerance +-1.02mm of width coil 914mm with toletance of +-2mm, coating mass AZ150, yield strength 350 MPA excluding GST and all consumable anchors, fasteners, washers, paint and hangers for lighting purpose & including transportation etc. complete in all respect with fixing at site as per requirement of Engineer-in-Charge at various lacation of Mandi Hotpath in district Etah (work will be done by specialised CO PROFLEX or equilvalent Co.at site including all machin T&P etc (Market Rate) As per Cheif Engineer Mandi Parishad Letter No- 720 dated 01.03.2019

Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8 Kms from the side of work and including watering dressing etc. required for proper completion of work (Lead upto 30m & lift 1.5m) SI 255 Meterial 11 (II)

Mild steel or iron work in heavy sizes such as trusses, built up gates record rack, roof work, gates etc. brought to required form including drilling holes revitting or welding where necessary, and also including supply of steel bolts, nuts, wastage etc. and their fixing require for proper completion of the work. SI 503 (Bulandshahar)