Uttar Pradesh Rural Road Development Agency Tender

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.Including all taxes, Royalties etc. but excluding GST

Construction of Panel concrete plain Cement concrete pavement, Thickness as per design, over a prepared subbasewith 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade) coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate no exceeding 25mm, mixed in a concrete mixer of not less that 0.2 cum capacity and appropriate weigh batcher uusing approved mix design , laid in approved fixed side formwork ( Steel Channel, Laying and fixing of 125 micron thiock polythene film , wedges, steel plates including levelling th formwork as per Drawing ), Spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and fininshedin continous operation including provision of contraction and expansion, construction joints , applying debonding strips, primer, sealant , dowel bars, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14 days. curing compound ( Where specified ) and water finishing to lines and grade as per drawing and Technical specification Clause 1501. PCc Grade M-30 Each Panesl ( 0.50 X0.50 ) thickness 125mmIncluding all taxes, Royalties etc. but excluding GST

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. 5th Kilometer Stone (Precast) Sr. No. 10.10 (i) MORD 1700 Including all taxes, Royalties etc. but excluding GST

Reinforced cement concrete M15 grade Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703Including all taxes, Royalties etc. but excluding GST

Reinforced cement concrete M15 grade Hecto meter stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703Including all taxes, Royalties etc. but excluding GST

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (Old Km Repair) Including all taxes, Royalties etc. but excluding GST

Providing and fixing of reflective typical PMGSY logo and informatory sign board with a corrosion resitant 3mm and 4mm thick aluminum composite panel face to be fully covered with DM 5600 engineering grade prismatic / equvivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angleIncluding all taxes, Royalties etc. but excluding GST

Providing and fixing of Maintenance information sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Including all taxes, Royalties etc. but excluding GST

Providing and fixing of Logo sign board at starting point & Intermediate distance with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angleIncluding all taxes, Royalties etc. but excluding GST

Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1701.3.9 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1701.2.2 (Size 600 mm equilateral triangle) Octagonal Including all taxes, Royalties etc. but excluding GST

Chavroan Including all taxes, Royalties etc. but excluding GST

Rectangular Including all taxes, Royalties etc. but excluding GST

600 mm Circular Including all taxes, Royalties etc. but excluding GST

600 mm Triangular Including all taxes, Royalties etc. but excluding GST

Providing and fixing of retro- reflectorised cautionary,mandatory and informatory sign as per IRC:67-2012 made of high intensity greade sheeting wide clause 801.3 friced over alluminium sheeting type -4 1.5 mm thick supported on a mild steel angle iron post 75 mm X75 mm X 6mm firmly fixed to the ground by means of properly designed foundation withh M-15 grade cement concrete 45cmX45cmX60cm , 60 cm below ground level as per approoved drawing. The retre reflective sheeting shall be tested for 3 yrear outdoor wethering test in indian condition as per IRC-67-2012 and proof of thre same in form of government report shall be uploaded by quoting tender. Including all taxes, Royalties etc. but excluding GST

CD

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of side (Etawah SOR Ch 4 Item 251) Including all taxes, Royalties etc. but excluding GST

Brick masonry work in 1:3 cement mortar in substructure complete except pointing and plastering, as per drawing and technical specification MORD 602, 603, 604, 900, 1202 & 1204 (Etawah SOR Ch 6 Item 307) Including all taxes, Royalties etc. but excluding GST

Providing concrete for plain/reinforced concrete M10 (1:3:6) in open foundations complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 (Etawah SOR Ch 5 Item 280) Including all taxes, Royalties etc. but excluding GST

Plastering with cement mortar (1:4), 12mm thick on brickwork in substructure as per technical specification(Etawah SOR Ch 13 Item 2) Including all taxes, Royalties etc. but excluding GST

Brick masonry work in cement mortar in foundation complete excluding pointing and plastering as per drawing and technical specifications Clauses 600, 1202 & 1203 (1:4) (Etawah SOR Ch 6 Item 305) Including all taxes, Royalties etc. but excluding GST

Pointing with cement mortar (1:3) on brickwork as per drawing and technical specification Clauses 613.3 and 1204 (SOR Ch. 13 571B ) Including all taxes, Royalties etc. but excluding GST

Providing and fixing of precast RCC Guard Stone in M20 ( 1;2:4 ) Nominal Mix having section 0.25x0.25 M and Length 1.0 M fixed in M10 concrete of section 0.50x0.50 m in thickness 0.40 M as per drawing and technical specifications Including all taxes, Royalties etc. but excluding GST

White washing two coats on parapet walls and tree trunks including preparation of surface by cleaning scraping etc. as per technical specifications Clause 1915 (SOR Ch. 30 Item15.13) Including all taxes, Royalties etc. but excluding GST

Painting writing lettering etc. on number plates on culverts including all materials labour t&p etc. required for proper completion of work.(lump sum) Including all taxes, Royalties etc. but excluding GST

Renewal (Part 3)

Construction of Subgrade and Earthen Shoulder with approved soil with all lifts and leads, laying in layers, breaking clods, dressing to required lines, curves, grade and sections, watering and compaction to meet at least 100 % procter density complete to specification requirements Including all taxes, Royalties etc. but excluding GST

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 Including all taxes, Royalties etc. but excluding GST

Providing and applying tack coat with Bitumen emulsion (RS 1) using emulsion distributor at the rate of 0.25 to 0.30 kg per sqm on the prepared dry and hungry bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. Including all taxes, Royalties etc. but excluding GST

Bituminous concrete using waste plastic Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.40 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORT&H specification clause No. 507 complete in all respects Including all taxes, Royalties etc. but excluding GST

Painting lines, dashes, arrows, etc. on roads with hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads in two coats on new work with ready mixed road marking paint conforming to IS:164 on bituminous/concrete surface, including cleaning the surface of all dirt, dust and other foreign matter, demarcation at site and traffic control as per drawing and Technical Specification Clause 1702 Including all taxes, Royalties etc. but excluding GST