Uttar Pradesh Rural Road Development Agency Tender

Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5 m transporting to site spreading, grading to required slope and compacting to meet requirement of table 300.1 and 300.2 with a lead upto 30 m as per technical Specification Cluase 301.5 ( Embankbent )(Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Construction of embankment with approved material obtained from borrow pits with a lift up to 1.5 m transporting to site spreading, grading to required slope and compacting to meet requirement of table 300.1 and 300.2 with a lead upto 30 m as per technical Specification Cluase 301.5 ( Shoulder ) (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Construction of embankment with approved materials deposited at site from roadway cutting and excavation from drain and foundation of other structure graded and compacting to meet requirement of table 300.1 and 300.2 as per technical Specification Cluase 301.5 ( Only Consolidation) (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Excavation for Roadway in soil by mechanical means including cutting & pushing the earth to site of embakment up to a distance of 100m including trimming bottom and side slopes accordance with requirements of lines,grades and cross sections. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Construction of granular sub-base of grading-I by providing well graded material, spreading in uniform layers with motor grader on prepared surface,manual mixing by mix in place method with rotavator at OMC, watering and compacting to the required density with smooth wheel roller to achieve the desired.As per Technical Specification Clause 401 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing, laying, spreading and compacting machine crushed stone aggregates of 53-22.4 mm sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel 80-100 kN in stages to proper grade and camber, applying and brooming the stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density for Grading-III and thickness as per Technical Specification Clause 405. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Laying brick soling layer on prepared sub grade with brick on end edging according to lines, graded and cross section show on the drawing filling joints with sand and earth, spreading 25 mm thick layer of earth over brick soling, watering and rolling the same with three wheeled road roller 80-100 kn as per Technical Spcification Clause 412. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70-1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and applying tack coat with Bitumen Emulsion RS 1 using Bitumen distributor at the rate of 0.25 kg to 0.30 kg per sqm on the prepared granular surfaces treated with primer & cleaned with Hydraulic broom as per Technical Specification Clause 503. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C as per Technical Specification Clause 508 including 8% waste plastic. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510. By Mechanical Means. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Construction of un-reinforcedc,plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregate not xeceeding 25 mm, mixed in concrete mixer of not less than 0.2 cum capcaity and appropriate weight batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel paltes including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including porovision of contraction and expansion, construction joints applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

HUME PIPE CULVERTS, RCC CULVERTS & DRAINS Earthwork in excavation for foundation of structures up to 1.5 m depth as per drawing and technical specification clause 1104 including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and back filling with approved material. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and laying M-20 PCC (1:2:4 nominal mix) in open foundation 1.5m below ground level and 1.5m above ground level including all material, labour, T&P etc. required for proper completion of work.as per Techincal specification clause 802, 803, 1202 & 1203. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Plain Cement Concrete M-10 (1:3:6 nominal mix) in foundation upto a depth of 1.5 m below ground level, including cost of all materials, labour and T&P etc as per drawings & Technical Specification Clause 1109 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Sand filling in foundation trenches as per drawing & Technical Specification Clause 305-3.9 on the sides of Hume Pipe as per direction of E/I. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

M-150 Brick Masonry Work in 1:3 cement mortar upto a depth of 1.5 m below ground level and 1.5 m above from bed /ground level, including cost of all materials, labour and T&P etc, as per drawing and Technical Specification Clause 1109 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing, laying and fixing RCC pipe NP3 for culverts on first class bedding of granular material including fixing collar with cement mortar 1:2, as per drawing and Technical Specification Clause 1106 & 1107. (a) 450 mm dia NP-3 Pipe (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Struck Pointing with Cement Mortar (1:3) on brickwork, including cost of all materials, labour and T&P etc, as per drawing and Technical Specification Clause 613.3 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Plastering with Cement Mortar (1:4), 15 mm thick on brickwork, including cost of all materials, labour and T&P etc, as per Technical Specification Clause 613.4 and 1204. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. 5th Kilometre Stone (precast) (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. Ordinory Kilometer Stone (precast) (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703. 200 m. Hectometre Stone (precast) (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of reflective Citizen information sign board with a corrosion resitant 4mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of reflective typical PMGSY logo and informatory sign board with a corrosion resitant 3mm and 4mm thick aluminum composite panel face to be fully covered with DM 5600 engineering grade prismatic / equvivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Mandatory / Regulatory sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Cheveron single 500 x 600 mm (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Logo sign board at starting point & Intermediate distance with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Maintenance information sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Mandatory / Regulatory sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle 600 mm Triangle (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Mandatory / Regulatory sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Circle 600 mm (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Mandatory / Regulatory sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle.600 mm x 450 mm rectangular (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and fixing of Mandatory / Regulatory sign board with a corrosion resitant 3mm thick aluminum composite panel (ACP) face to be fully covered with DM 5600 engineering grade prismatic/equivalent sheeting Type I as per IRC67:2012 with post of MS structure of square hollow section MS 75X75X6 mm and MS frame of 35X35X5 mm angle Octogonal 750 mm (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Supplying and installation of delineators (road way indicators, hazard markers, object markers), 80-100 cm high above ground level, painted black and white in 15 cm wide strips, fitted with 80 x 100 mm rectangular or 75 mm dia circular reflectorised panels at the top, buried or pressed into the ground and conforming toIRC-79 and the drawings. (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Painting two coats including primer coat after filling the surface with synthetic enamel paint in all shades on new, plastered / concrete surfaces as per drawing and Technical Specification Clause 1701 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Colour washing two coats on parapet walls including preparation of surface as per Technical Specification Clause 1915 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)

Printing new letter and figures of any shade with synthetic enamel paint black or any other approved colour to give an even shade as per drawings and Technical Specification Clause 1701 (Including Labour cess, other levies, duties, royalties, cess, toll, taxes of local bodies and authorities etc. and excluding GST)