Uttar Pradesh Rural Road Development Agency Tender

G-III Provinding , Laying spreading & compacting stone aggregate of specific to water bound macadam specification 75 mm compacted thickness, including spreading in uniform thickness, handpacking, rolling with 3 wheeled steel/vibratory roller of 8-10 tonne in stages to proper grade and camber, applying & brooming, requisite type of screening/binding materials to fill up the intersices of coarse aggregate, watering & compacting to the required density making necessary earthen bunds to protect edges, lighting, guarding, barricading and maitenance of diversion etc. and including all lead for metal as per MORD specification clause 405 sr no 4.7 - (3) - WBM Gr-III (22.4-53 mm size) of stone ballast from Haridwar Quarry. (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Providing & applying primer coat with Bitumen Emulsion SS-1 grade on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 8.5 kg/ 10 sqm area using mechanical means complete as per MORD Specification no 502 [Sr. No. 5.1 (I)] (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Construction of Panel plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M 30 (Grade), coarse and fine aggregate not xeceeding 25 mm, mixed in concrete mixer of not less than 0.2 cum capcaity and appropriate weight batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel paltes including levelling the formwork as per drawing) spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including porovision of contraction and expansion, construction joints applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501.Panel Cement Concrete Pavement Grade M-30 Each Panel(0.50*0.50) thickness 125mm) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Dismantelling cement concrete or brick or granolithic floors including base concrete and including stacking of dismantelled material as directed by Engineer-in-charge with in as distance of 60metre (200feets). (Item no 697, chapter 17, SOR2022) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Excavation in foundaton in ordinary soil (Loam, Clay or sand) including lift upto 1.50m, and lead upto 30m and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by Eingineer-in-charge upto a distance of 30m from the foundation trenches. (where machine can not reach/move) (ch-4 Earth Work Item no 251) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Cement concrete with 4cm gauge approved stone ballast coarse sand cement in proportion of 8:4:1 including supply of all material, labour and T & P etc. required for proper completion of work. (ch-5 Concrete item no 281) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

RCC work with cement approved coarse sand and 2cm gauge approved stone grit in proportion of 1:2:4 excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 BWG GI binding wire and including necessary centering and shuttering etc. and supply of all materials, labour and T&P etc. required for proper completion of work. binding wire to be supplied by the contractor free of cost. Including making of drip coarse.(ch-5 Concrete item no 283) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Mild steel or TMT Bars (Fe-500D grade or higher) or HYSD bars or iron in plain work such as reinforcement concrete brought to required shape as necessary including bending for proper completion of the work and including supply of all steel. Steel Reinforcement (HYSD Bars)@0.80% of RCC work (Ch-10 Mild Steel and Iron Work Item no 504) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Bricks (S.O.B) on edge pavement on patries laid and dry joints filled with local sand including preparation of base to proper slope & its ramming. Spreading layer of 1 cm (3/8") depth of local sand over the subgrade and including cost of material, labour and T&P etc. required for proper completion of the work, as per MORD specification 412 sl no 4.18 At juction to Chak Road. Rate as per PWD SOR 01-07-2022 Sl No 763, chapter-20 page 47 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Renewal (Part 2)

Cleaning jungle including uprooting of rank vegetation grass, bush, wood, trees and sapling girth upto 30cm. Measured at the height of 1m above ground level and removal of rubbish upto a distance of 50m. Outside the periphery of area cleared. (Item no 259A, Chpter 04 SOR 2022) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Providing and applying tack coat with Bitumen (RS-1) at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503. (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Providing and laying bituminous concrete with 100-120TPH batch type producing an average output of 75 Tonnes per hour using crust aggregates of specified grading, premixed with bituminous binder@5.40% of mixand filler, transporting the hot mix to work site, laying with a hydro static paver finisher with sensor control to the required grade, level and alingement, rolling with smooth wheeled, vibratory and tandom rollers to achieve the desired compaction as per MORTH specification ClauseNo.509 complete in all respects (509) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Construction of Subgrade and Earthen Shoulders (Carted) Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. as directed by Engineer in Charge as directed by Engineer in Charge (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Construction of Embankment with Material Obtained from site (ordinary) Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1. as directed by Engineer in Charge as directed by Engineer in Charge (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Kilometre Stone Kilometre Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Hectometer Stone Reinforced cement concrete M15 grade kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Painting of Existing Road furniture(Lump Sum) as directed by Engineer-in-Charge. (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Road marking with Hot applied Thermoplastic Compound with Reflectorising Glass beads on Bituminous surface-Prividing and laying of Hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms per sqm area, thickness of 2.5mm is exclusive of surface to be level, uniform and free from streaks and holes. (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

Supply and fixing moulded shank cat eye's moulded shank raised pavement marker made of polycarbonate moulded body and reflected panels with micro prismatic lens capable of providing total internal reflection of the light entering the lens face confirming to ASTMD 4280 type h and coplying to specification of categories 'a' of MORTH circular no. RW/NH?33023/10-97-DO III dt 11.06.1997. The height width and length shall not exceed 20mm 150mm and 105mm respectively & with minimum reflective area of 13Sqcm and the each side, slope to the base shall be 35/- degree. Fixing will be without nails but using twin polymer shank using bitumen adhesive on bitumen road as er manufacturers recomendation including site clearance etc and comlete as per direction by Engineer in charge.(SOR Lucknow 2020, Ch-26 Traffic Signs work, SI No. 5) (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

PMGSY Hazard Marker Board (Retroreflective) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 3 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

PMGSY Cautionary Board (Retroreflective, 600mm Equilateral side) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

PMGSY Cautionary Board (Retroreflective, 900mm Equilateral side) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)

PMGSY STOP Board (Retroreflective, 900mm Octagonal side) Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 3 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mm x 450 mm x 600 mm, 600 mm below ground level as per drawings and Technical Specification Clause 801 (Including royalty, labour cess and other applicable levies and all taxes complete excluding GST)