Uttar Pradesh Housing And Development Board Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Uttar Pradesh Housing And Development Board - UPAVP Tender
Building Construction
Eprocure
Opening Date15 Apr 2025
Closing Date8 May 2025
Tender Amount₹ 11,87,07,000
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
Class –A category for Building work.
Technical Capacity
... View More
The required prior work experience for the bidder includes having completed similar works within 5 financial years ending the last day of the month. The specifics are as follows: - A single largest work of at least Rs 949.66 Lacs, which is 80% of the bid amount
- Two works, each of at least Rs 593.54 Lacs, which is 50% of the bid amount
- Three works, each of at least Rs 474.83 Lacs, which is 40% of the bid amount
The estimated cost of the work is Rs. 1187.07 Lacs. Alternatively, the bidder can also have experience of - Three similar completed works costing not less than 40% of the estimated cost, which is not less than Rs. 474.83 Lacs.
- Two similar completed works costing not less than 50% of the estimated cost, which is not less than Rs. 593.74 Lacs.
- One similar completed work costing not less than 80% of the estimated cost, which is not less than Rs. 949.66 Lacs. The evidence of satisfactory execution of work should be produced and certified by the Engineer-in-charge of the work, not below the rank of Executive Engineer or equivalent rank of officers.
Costs
EMD
₹ 23,74,000Document Cost
₹ 8,850Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPHDB_1028423_1Bid Award Id
ViewTender No
524/M-11/55, Dated 07.04.2025, 539/M-11/60, Dated 09.04.2025Tender Authority
Uttar Pradesh Housing And Development Board ViewPurchaser Address
-Website
http://etender.up.nic.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) (DSR- 2023- 13.47.1)
5608.8
124
698744.3
... More
Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x 300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per tandard design: 150 x 100 mm size P type With sewer bricks conforming to IS : 4885 (DSR- 2023 - 19.4.2.2)
21
1974
41463.87
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. all kinds of soil (DSR-2023- 2.8.1)
2682.29
189
508374.42
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2X4.0 sqmm + 1x 4.0 sqmm earth wire (DSR- 2022 E&M - 1.14.3)
3270
253
830383.8
... More
Spray SS body 80 ltrs (MR)
1
12000
12000
... More
Design and construction including supply of all material labour T & Petc. R.C.C. Over Head Tank of 50 K.L.capacity over 16.00 M R.C.C. staging measured from ground level to the top of ring beam supporting tank body complete with R.C.C. stair case with 0.9 M heigh MS. railing on both side with over stair case of 16mm dia supported on 50x50x6 mm angle iron posts placed at suitable intervals supply and fixing at top roof 600x600 mm. M.S manhole cover with locking arrangement supply and fixing of aluminium lightening conductor with earthing water level indicator mosquito proof ventilator red-light arrangement at top including proper wiring, steel gate enclosure at entrance of the stair case Hosting erection and jointing G.I class 'B' pipes of required diameters for inlet, outlet, overflow and washout, pipe as per vetted design provided by Bidder including supply of Gl pipe class B of 1 RM. length of desired size 6mm thick rubber packing bolt & nuts of standard make and size as per approval of Engineer in-charge etc, including supply G.I. pipe clamps etc upto one meter beyond apron 25mm, thick flooring for apron in PCC. 1.2 4 laid in panels over 80mm thick PCC. 1:48 (1 Cement: 4 Corse Sand & Stone Ballast) K&C type drain around the apron construction' of washout, overflow chamber painting the complete structure (IS marked) approved make and shade painting all steel work such as railing ladders, manhole cover and all pipe with two coat of approved quality enamel paints (IS marked) over one oase coat of primer and including Testing of tank for water tightness.
1. Adjustment in the cost to be made for every 0.50 MT/ Sqm deviation in safe Bearing capacity of soil from 7.21 MT/Sqm as provide in Item No. 1 (+/-) Rs 5000.00 MT/Sqm
2. Adjustment in the cost to be made for every 0.50 M or a part of their foundation depth 2.00 M below GL. deviation from as provides in item no. 1 (+/-) Rs. 5000.00 RM
Condition:
1. All work shall be carried out as per detailed specification of UPPWD/CPW.D/ UPAVP/UP Jal Nigam
2. All Material used as per parishad approved brand list.
3. Work shall be done as per direction of Engineer-in-charge.
4. Payment shall be made in stagewise as per enclosure attached.
5. The above rates are inclusive of testing of soil and structural designing of Over Head Tank, including its vetting from reputed Govt. Engineering College.
6. Inlet, outlet & washout pipes and specials as per design will be supplied by Contractor.
7. The contractor has to submit soil testing report and vetted structural design of over head tank in the office of The EXECUTIVE ENGINEER
8. All pipes, specials & sluice valves etc shall be ISI Marked and confirming to relivent IS code
50000
31
1598000
... More
Providing & fixing of pressure switch in M.S. pipe line including connection etc as required.
2
1175
2350.88
... More
Fixing of Door, windows / ventilators chaukhats in position.
(b) Window chaukhats (MR)
69
100
6900
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 25 to 40 mm nominal bore (DSR- 2023 - 18.13.1)
26
663
17263.48
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. (DSR- 2022 E&M - 1.31)
100
362
36267
... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete (DSR-2023-5.9.1)
1067.27
285
304748.28
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. in all kind of soil upto 1.5 m to 3.0m depth
(DSR-2023- 2.6.1+2.26.1)
105.16
221
23300.3
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer in-charge. (DSR- 2023 - 23.6)
7.06
1120
7907.55
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7 kg per square metre on damp proof course after cleaning the surface with brushes and finally with a piece of cloth lightly soaked in kerosene oil. (DSR-2023-4.13)
248.63
106
26459.21
... More
Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.
20mm (DSR- 2022 E&M - 1.21.1)
15762
97
1533957.84
... More
Providing/Fixing of cubical type floor mounted Fire pump control panel fabricated from 16 G M.S. sheet duly powder coated finish of approved shade and comprising of :a) 40 amp 3 Pole MCCB, 50Hz with breaking capacity 10KW.b)One Volt meter (0-500 V) with selector switch.c) One set including lamps.Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified,ISO 13485:2016 & OHSAS 18001:2007 Approved.
2
42500
85000
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR-2023-11.37)
1220.65
798
974603.58
... More
50mm dia PVC strainer 4mt Long ridded with stander trap & Spaciales
2
500
1000
... More
Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge. (Only weight of grill to be measured for payment). (DSR- 2023-21.17)
526.38
464
244661.42
... More
Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. Complete for all lift. (DSR-2023-2.25(a))
9114.76
510
4649074.49
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation M-150 in superstructure above plinth level up to floorV level. Cement mortar 1:4 (1 cement :4 coarse sand) (DSR- 2023-6.13.2)
0.74
818
605.52
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 150mm diameter S.W. Pipe (DSR- 2023 - 19.2.2)
558.99
859
480218.42
... More
Supply of labour T&P and jointing & lowering of PVC pipe consisting of 110mm & 50 mm dia bore long ribbed PVC Strainer & Cavity complete Beyond 30 metre
34
7
238
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm (DSR-2023- 11.41.2)
667.71
1131
755253.46
... More
Supply of AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required.-Make: Havells-STANDARD -Refresh Air-SPS 300mm sweep. (MR)
23
2025
46575
... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (DSR- 2023-2.10.1.2)
369.89
256
94843.5
... More
Development of tube well in accordance with IS : 2800 (part I) and IS: 11189, to establish maximum rate of useable water yield without sand content (beyond permissible limit), with required capacity air compressor, running the compressor for required time till well is fully developed, measuring yield of well by “V” notch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (DSR- 2023 - 23.12)
90
790
71105.4
... More
Supplying, installation, testing & commissioning of Manual call Boxes of MS constuction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
12
360
4324.68
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023-4.1.3)
6.53
5736
37459.87
... More
Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. (DSR- 2023- 17.71)
25
122
3064.5
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 50 mm diameter pipe (DSR- 2023 - 18.41.6)
220
126
27753
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:6 (1 cement: 6 coarse sand) (DSR-2023- 13.5.2)
5548.66
287
1597292.75
... More
Supply of 63mm dia plain PVC (6 kg/sqcm) Pressure
32
300
9600
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. All types of soil 300mm dia (DSR- 2023 - 23.1.1.1)
40
515
20613.2
... More
Providing and fixing C.I. tee at the inlet and outlet of septic tank. (DSR-2023- Code- 7087)
8
452
3617.36
... More
Supply and erection of 1X10 W mirror light complete in all respects (MR)
19
945
17955
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 510x1040 mm bowl depth 200 mm (DSR- 2023- 17.10.1.3)
1
5212
5212.69
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554. 35 sqmm 3.5 core (MR)
50
378
18945
... More
Supplying and Laying of 6 SWG G.I wire at 0.50 metre below ground level for conductor earth electrode, including connection / terminating with G.I. thimble etc. as required. (DSR- 2022 E&M- 5.7)
455
38
17644.9
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required. 100 mm Dia (DSR- 2022 E&M- 14.13.3)
50
1373
68656
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. (DSR- 2023- 18.48)
5000
8
40050
... More
High pressure fasher 5 HP ( AR Italymade) (MR)
1
72000
72000
... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick (DSR-2023-5.9.21)
3029.1
613
1856989.76
... More
Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality. 1.0 mm thick (DSR-2023-9.127.2)
204.95
653
133904.08
... More
Supply & fixing of CO2 type fire extinguisher, 6.5 kg. capacity(ISI Marked IS:2878 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
16
19900
318400
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 50 mm diameter pipe (DSR- 2023 - 18.38.6)
148.4
37
5510.09
... More
Providing and fixing gun metal non- return valve of approved quality (screwed end) : 65 mm nominal bore Vertical (DSR- 2023 - 18.19.5.2)
30
1668
50056.5
... More
Supply and fixing of anodised /aluminium windows having 2 mm thick aluminium section excluding coating & an average coating of 20 micron fully glazed made of aluminium door tube size 83.5x 44.65 mm as vertical member & 1114.00 x 44.45 mm size tube in bottom and horizontal members door chaukhat should be of aluminium tublar vertical with two openable shutters. The rate will include cost of material fixtures, 5mm glass handles, locks, screw necessary beeding & excluding cost of floor spring if required for proper completion of work as per direction of Engineer I/C.
113.63
4321
491099.77
... More
Supply of submersible pump of make KSB 2.5 HP with control panel, support wire etc. complete. (NS)
2
30000
60000
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 20 mm nominal bore (DSR- 2023 - 18.17.1A)
15
393
5897.25
... More
Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. upto 450 mm sweep. (DSR- 2022 E&M - 1.50.1)
17
342
5816.38
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box(16 SWG) with hinged cover plate & suitable for operation with amplifier i/c line matching trasformer etc. complete as required.
12
423
5081.88
... More
Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.
23
910
20930
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 32mm dia (DSR- 2023- 17.28.1.1)
24
75
1815.6
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 32mm dia nominal bore (DSR- 2023- 18.10.4)
207
485
100531.62
... More
Providing and fixing circular/ Hexagonal cast iron or M.S. sheet box for ceiling fan clamp, of internal dia 140 mm, 73 mm height, top lid of 1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/ M.S. sheet box by means of 3.3 mm dia round headed screws, one lock at the corners. Clamp shall be made of 12 mm dia M.S. bar bent to shape as per standard drawing. (DSR- 2023- 10.18)
119
160
19118.54
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6.00, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS: 374-2019), THD less than 10%, remote or electronic requlator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required. (DSR- 2022 E&M- 19.1)
119
2075
247001.16
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25 mm nominal bore (DSR- 2023 - 18.17.1)
4
453
1812.76
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110 mm diameter (DSR- 2023- 12.41.2)
287
274
78867.6
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Single Pole (DSR- 2022 E&M- 2.10.1
108
194
21021.12
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40mm dia nominal bore (DSR- 2023 - 18.12.5)
48
449
21565.92
... More
Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone cenclosed in a M.S. box(16 SWG)/ABS box with break glass in front etc. complete as required.
12
688
8256.96
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete :200 x 10mm (DSR- 2023- 9.97.3)
296
72
21486.64
... More
Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735. Size 110x110x110 mm
6
265
1590
... More
Thermal Insulation of roofing with Expanded polystyrene fixed with suitable adhesive to the false ceiling as per the directions of the Engineer in-charge: With Type SE - Self Extinguishing type 50 mm thick (DSR-2023-12.36.2)
155.25
257
39910.12
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 65mm diameter pipe (DSR- 2023 - 18.41.7)
100
199
19911
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sqmm. (28mm) (DSR- 2022 E&M- 9.1.33)
4
234
939.76
... More
Providing and fixing Angle iron chaukhats (40x40x5) for doors, windows and ventilators of mild steel Tee-sections, joints mitred and welded, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer. Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size). (DSR-2023- 10.13.1)
2637.56
103
272143.44
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 25mm nominal bore (DSR- 2023 - 18.17.1)
30
453
13595.7
... More
Supplying and drawing co-axial TV cable RG-6 graded, 0.7 mm solid copper conductor PE insulated,shielded with fine tinned copper braid and protected with PVC sheath in the existing surface/ recessed steel/ PVC conduit as required. (DSR- 2022 E&M - 1.19)
342
35
12219.66
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, priming coat of approved steel primer, but excluding the cost of other fittings,glass panes complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) (DSR-10.11.1)
738.72
95
70488.66
... More
Wood Painting:Applying priming coat:
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (DSR-13.62.1)
542.73
164
89409.34
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. All kinds of soil upto 1.5 m depth (DSR-2023- 2.6.1)
109.73
129
14181.51
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. Group C(DSR- 2022 E&M - 1.10.3)
637
1115
710490.69
... More
LED type 50 watt(street light) fittings of all types with all accessories.
20
7107
142155
... More
Suitable number(S) 40mm dia class-B GI Pipes from above control box to upto 0.5 meter below ground level for power cable entry.
20
675
13500
... More
Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm (DSR- 9.100.1)
352
48
16980.48
... More
Supply of steel wire rope
48
30
1440
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. (DSR- 2023-13.80)
9782.83
113
1111525.15
... More
Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 1.00 mm thick with zinc coating not less than 275 gm/m² (DSR- 2023- 12.1.1)
699.2
1061
741851.2
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 10 sqmm. (19mm) (DSR- 2022 E&M- 9.1.2)
131
183
24003.13
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm (DSR- 2022 E&M- 7.1.1)
850
294
250104
... More
Providing necessary boaring T&P including making arrangement of water for boaring 200mm dia bore hole by Rig machine in all type of starta complete item 30 metre B.G.L
60
125
7500
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore (DSR- 2023 - 18.53)
12
418
5018.04
... More
Suitable size control box with 1 no. incoming and 2 nos. outgoing terminals and 2 nos. tap-out terminal with 1 no. 5A hrc fuses complete.-1set
20
1350
27000
... More
Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). Second class teak wood (DSR- 2023- 9.1.1)
4.13
104086
429875.55
... More
Air compressor 10 HP (MR)
1
22500
22500
... More
Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge (Door handle, lock and stopper etc.to be paid separately). (DSR- 2023- 21.18)
12.38
3877
48009.02
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete. 40 mm thick with 20 mm nominal size stone aggregate (DSR-2023-11.3.1)
858.25
447
383826.57
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, Double door (DSR- 2022 E&M- 2.3.3)
127
1760
223535.24
... More
Manufacturing, supplying and fixing retro reflective overhead signage boards made up of 2 mm thick aluminium sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type - III of ASTM-D-4956-01 as approved by Engineer-in-charge, letters, borders etc. as per IRC : 67-2001 in silver white with blue colour back ground and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminium alloys, rivets or bolts & nuts @ 300 mm centre to centre all along the periphery as well as in two vertical rows along with theft resistant measures, including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminium sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete Overhead informatory road signage (DSR- 2023- 16.60.1)
153.4
4281
656757.56
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) (DSR- 2022 E&M- 5.9)
435
109
47623.8
... More
Centering and shuttering including strutting, propping etc. and removal of form for .Columns, Pillars, Piers, Abutments, Posts and Struts (DSR-2023-5.9.6)
2591.51
699
1813927.43
... More
Manufacturing, supplying and fixing retro reflective sign boards madeup of 2 mm thick aluminium sheet, face to be fully covered with highintensity encapsulated type heat activated retro reflective sheetingconforming to type - IV of ASTM-D 4956-01 in blue and silver white orother colour combination including subject matter, message (bilingual), symbols and borders etc. as per IRC ; 67:2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminium alloy rivets @ 20 cm c/c to back support frame of M.S. angle iron of size 25x25x3 mm along with theft resistant measures, mounted and fixed with 2 Nos. M.S. angles of size 35x35x5 mm to a vertical post made up to M.S. Tee section ISMT 50x50x6 mm welded with base plate of size 100x100x5 mm at the bottom end and including making holes in pipes, angles flats, providing & fixing M.S. message plate of required size, steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical MS-Tee support to be painted in black and white colours).Backside of aluminium sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coat including all leads and lifts etc. complete as per drawing , specification and direction of Engineer-in-charge Mandatory/ Regulatory sign boards of 900 mm diametre with support length of 3750 mm (DSR- 2023-16.59.1)
8
5230
41843.36
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. in all kind of soil upto 3.0m to 4.50m depth
(DSR-2023- 2.6.1+2.26.1*2)
61.17
313
19201.26
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design : With 20x20 mm square bar (DSR- 2023 - 19.15.1)
20
396
7932.2
... More
Supply, installation, testing and commissioning of external post top lantern with follong and complete as required. 6m high(5.0m above ground) 65mm dia GI pole as approved, adopting socket at top for fixture mentioned below, base plate 300x300x6mm and provision for mounting junction box etc.-1 set
20
11250
225000
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:1½:3 (1 Cement: 1½ coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023-4.1.2)
1333.64
6073
8099502.46
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia (DSR- 2023 - 23.4.2)
40
587
23517.2
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Mild steel and Medium Tensile steel bars (DSR-2023-5.22.1)
788.82
77
61512.18
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineerin-charge. (DSR- 2023 - 23.8)
(0.785*0.4*0.4*90)-(0.785*0.2*0.2*90)=8.478 CUM
20.96
1474
30897.14
... More
Transportation (MR)
1
27000
27000
... More
Providing necessary boaring T&P including making arrangement of water for boaring 200mm dia bore hole by Rig machine in all type of starta complete item Beyond 30 metre
34
140
4760
... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform (DSR-2023-5.9.3)
7.66
675
5171.73
... More
Oil tank for diesel 200 literes 2 nos. (MR)
2
157500
315000
... More
Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required : Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern (DSR- 2023- 17.5.2)
13
13112
170465.49
... More
Providing and fixing terminal guard : 75 mm Sand cast iron S&S as per IS - 1729 (DSR- 2023- 17.56.2.1)
4
248
992.28
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore (DSR- 2023- 18.18.3)
30
337
10136.7
... More
Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover (DSR- 2023- 10.6.1)
61.74
2660
164229.02
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100mm diameter S.W. Pipe (DSR- 2023 - 19.2.1)
45
702
31610.7
... More
Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required. (DSR- 2022 E&M- 2.11)
82
9
810.16
... More
Supplying, fixing, testing & commission of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets confirming to IS 13095 of following sizes as required: 100 mm dia
2
5068
10137.96
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). (b) Double leaf (DSR- 2023- 9.20.1 + 9.26)
11.22
2607
29251.77
... More
Providing and fixing glass strips in joints of terrazo/ cement concrete floors. 40 mm wide and 4 mm thick. (DSR- 2023- 11.13.1)
1033.75
66
69064.84
... More
Supplying, filling, spreading & leveling coarase sand of size range 1.5 mm to 2mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR- 2023 - 23.7)
7.06
1120
7907.55
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. (DSR- 2023- 17.73.2)
25
516
12905.25
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32mm dia nominal bore (DSR- 2023 - 18.12.4)
230
393
90484.3
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023-5.2.2)
646.21
7902
5106590.52
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding (DSR- 2023-9.48.1)
1219.12
159
194486.21
... More
Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required. (DSR- 2022 E&M- 1.49)
142
43
6154.28
... More
Supply & fixing of 7/9 W LED BULB complete in all respect. (MR)
106
135
14310
... More
Constructing brick masonry INSPECTION chamber 60x60x60 cm with bricks of class designation M-150 in cement mortar 1:4 (1 cement : 4 coarse sand) including CI cover with frame LIGHT WEIGHT complete as per design. With FPS bricks 60x60x60 cm inside
21
6554
137639.46
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation M- 150 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR- 2023- 6.1.2 AR)
711.11
6869
4885034.15
... More
Installation, testing and commissioning of prewired, flourescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube/lamp etc. directly on ceiling / wall, including connection with 1.5 sq. mm. PVC insulated, copper conductor, single core cable etc. as required. (DSR- 2022 E&M- 1.41)
113
156
17698.06
... More
6 mm cement plaster on celling (a) 1:3(1 cement:3 fine sand) (DSR- 2023-13.16.1)
1830.97
218
400561.31
... More
Supplying & fixing 63 mm dia, 15m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. confirming to IS 636(type-A) as required:Gun Metal
4
3955
15820.52
... More
Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735. Size 110 mm
6
205
1230
... More
Supply of medium class GI pipe 32mm B class
54
205
11070
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg /sqm mixed with water proofing cement compound @ 0.253 kg/sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/ sqm mixed with water proofing cement compound @ 0.126 kg/ sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. (DSR- 2023-22.5)
251.47
449
112982.96
... More
Supply of all material labour T & P required for proper completion of work to construct cement concrete (1:2:4) platform of 1.50 mt dia for hand pump as per drawing with P.C.C (1:5:10)
2
7000
14000
... More
Supplying and fixing of Self Glow Exit signage for stairs and exits size 100 x 300. Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified, ISO 13485:2016 & OHSAS 18001:2007 Approved.
12
2750
33000
... More
Supply & fixing ofrecess/Surface/Pendent mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. Cat. AAA (MR)
13
1215
15795
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer-in-charge, upto 90 metre depth below ground level. 400 mm dia (DSR- 2023 - 23.1.1.3)
180
721
129857.4
... More
Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.
1 or 2 module(75mm X 75 mm ) (DSR- 2022 E&M- 1.27)
105
226
23789.85
... More
Supply of labour T &P and jointing & lowering of PVC pipe consisting of 110mm & 50mm dia bore ribbed PVC strainer & cavity complete
2
600
1200
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore (DSR- 2023- 18.51.1)
15
581
8726.1
... More
Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation M- 150 (DSR- 2023- 19.7.1.1)
52
9298
483528.76
... More
Supplying, assembling, lowering and fixing in vertical position in bore well, unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer -in-charge.
200 mm nominal size dia (DSR- 2023 - 23.3.3)
120
810
97279.2
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and for all lift, as directed by Engineer-in-charge. Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. in all kind of soil upto 3.0m to 4.50m depth
(DSR-2023- 2.6.1+2.26.1*3)
31.62
406
12844.68
... More
Providing and fixing precoated galvanised steel sheet roofing accessories of total coated thickness 0.50 mm (base metal of minimum 0.45 mm thickness with total coating thickness of 0.05 mm) with Zinc coating 120 gram per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (600 mm over all girth) (DSR- 2023- 12.51.6)
108
956
103307.4
... More
Extra for depth for manholes : Size 90x80 cm With common burnt clay F.P.S. (non modular) bricks of class designation M-150 (DSR- 2023 - 19.8.1.1)
1
6426
6426.05
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 25 mm diameter pipe (DSR- 2023 - 18.41.3)
100
117
11701
... More
Steel Painting:Applying priming coat:
Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (DSR- 13.62.1)
1102.51
164
181627.5
... More
Providing and fixing mineral fibre false ceiling tiles at all heights of size 595X595 mm of approved texture, design and pattern. The tiles should have Humidity Resistance (RH) of 99%, Light Reflectance ≥ 85%, Thermal Conductivity k = 0.052 - 0.057 w/m K, Fire Performance as per (BS 476 pt - 6 &7)in true horizontal level suspended on interlocking T-Grid of hot dipped all round galvanized iron section of 0.33 mm thick (galvanized @120 gsm) comprising of main T runners of 15x32 mm of length 3000 mm, cross T of size 15x32 mm of length 1200 mm and secondary intermediate cross T of size 15x32 mm of length 600 mm to form grid module of size 600x600 mm suspended from ceiling using galvanized mild steel item (galvanised@80gsm) 50 mm long 8 mm outer diameter M-6 dash fasteners, 6 mm diameter fully threaded hanger rod up to 1000 mm length and L-shape level adjuster of size 85x25x2 mm, spaced at 1200 mm centre to centre along main ‘T’. The system should rest on periphery walls /partitions with the help of GI perimeter wall angle of size24x24X3000 mm made of 0.40 mm thick sheet, to be fixed to the wall with help of plastic rawl plug at 450 mm centre to centre & 40 mm long dry wall S.S. screws. The exposed bottom portion of all T-sections used in false ceiling support system shall be pre-painted with polyester baked paint, for all heights. The work shall be carried out as per specifications, drawings and as per directions of the engineer-in-charge. With 20 mm thick beveled tegular mineral fibre false ceiling tile (NRC 0.7) (DSR- 2023- 26.27.2)
683.08
1944
1328576.94
... More
Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting, M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB’s (Four Pole 36 KA with thermal magnatic release) Switches complete and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA, P.F, KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic aluminium busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB’s shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc. The Job includes the grounting of the board as per directions of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A & B only. The minimum clearances between bus bars shall be as follows : Phase to phase - minimum 20mm Phase to neutral-minimum 15mm CUBICAL PANEL BOARD ( MCCB TYPE ) SUB PANEL-1 (IN SUBSTATION) Incoming : one (1) No.250Amp. MCCB-1No. Metering : One (1) No. (0-500V) 96 x 96 Sqmm voltmeter with control fuse & selector switch. One (1) No. (0-250A) 96 x 96 Sqmm CT operated Ammeter with selector switch, CTs etc. One (1) Set of Phase Indication Lamp. Bus Bar : One (1) No.315 A, TPN aluminimum bus bar of suitable length. Outgoing : Phase indication lamps on each outgoing to be provided. 100 Amp. 4P MCCB- 1 No. 63 Amp. 4P MCB- 1 No. 32 Amp. SP MCB-2 No. 100 Amp. 4P MCCB- 1 No-Spare. 63 Amp. 4P MCB- 1 No-Spare. OR outgoing as per site requirment
5
225000
1125000
... More
Supply and fixing of LED Tube Light with batten suitable for up to 1X20 watt LED tube light complete including tube etc. on surface complete in all respect. (MR)
108
315
34020
... More
Supplying & fixing First-aid hose Reel with MS construction spray painted in post office red,conforming to IS 884 complete with the following as required. 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipments on wall.Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m
6
6595
39574.08
... More
Supply of 100mm dia Johnson screen. (NS)
8
250
2000
... More
Supply and fixing of finolex of copper cable ISI marked submersible cable of size 4 sq mm (NS)
180
175
31500
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. (DSR- 2023- 17.31)
25
1170
29270
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2X1.5 sqmm + 1x1.5 sqmm earth wire (DSR- 2022 E&M - 1.14.1)
4975
177
881321.25
... More
Providing & Laying Trimix vaccum dewateringthe concrete floors using TREMIX or equivalent over item no 5.4 and finishing t(ie top surface to required level/ slope and grade with rough/broom finish using power trowels (froth fan & disc) of standard make inclrirJiisg curing, providing and mixing of IJarJOnitlg corn pound @ 2Kg/Sqm,cutting of VDF floor 100-150nim thick with Diamond Saw System (rlisposai of debris to be included in the quoted rate)as per specification including filling of Co por of Fosroc make etc. complete as per specification and draving. (Maximum thickness of RCC flooring shall be of 150 mm) At all heights/depths and levels
8890.94
300
2667282
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 80 mm nominal bore (DSR- 2023 - 18.17.6)
4
1896
7585.8
... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources).(DSR-2023-5.3)
7.8
8377
65344.58
... More
Providing and fixing M.S. clamp of required dia to the top of casing/ housing pipe of tubewell as per IS: 2800 (part I), including necessary bolts & nuts of required size complete. 200 mm clamp. (DSR- 2023 - 23.14.3)
2
1670
3340.16
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge. Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge (DSR- 2023-16.46.1)
4445.48
6
28006.52
... More
Installation of India Marka-II hand pump over the bore hole as per direction of E/I and Installtion
2
7300
14600
... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.. (DSR-2023-5.30)
1330.39
57
75951.97
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. H.D. -20- Circular shape 560mm internal diameter (DSR- 2023 19.19.3.1)
21
1220
25622.73
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.
Double Pole (DSR- 2022 E&M- 1.10.3)
61
498
30424.36
... More
Supplying & fixing single headed internal yard hydrant valve with instantaneous Gunmetal/Stainless Steel coupling of 63 mm dia with cast iron wheel, ISI marked, confirming to IS 5290(type A) with blank Gunmetal/Stainless Steel cap and chain as required:
Single headed Gunmetal
4
5813
23253.28
... More
Supply of 110 mm dia PVC casing pipe for boring 6 kg/sqmcm (MR)
6
333
1998
... More
Supplying and stacking at site. 53 mm to 45 mm size stone aggregate (DSR- 2023- 16.3.3)
266.73
1341
357802.29
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2X6.0 sqmm + 1x 6.0 sqmm earth wire (DSR- 2022 E&M - 1.14.4)
2910
333
971299.8
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation M-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand) (DSR - 2023- 6.4.2 (AR))
658.1
8306
5466639.27
... More
Supply and fixing of UPVC S.W.R. plain tee confirming to IS-14735. Size 75x75x75 mm
13
172
2236
... More
Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work. 75 mm O.D. (MR)
125
340
42500
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 200 mm nominal size dia
60
914
54858.6
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 25 mm nominal dia Pipes (DSR- 2023- 18.8.3)
225
456
102811.5
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation M- 150 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR- 2023- 6.1.1 AR)
77
7043
542324.09
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. 400 mm dia (DSR- 2023 - 23.2.1.3)
30
901
27053.7
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete. (DSR- 2023- 12.22)
72
217
15636.24
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 20 mm nominal dia Pipes (DSR- 2023- 18.7.2)
600
243
146352
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 80mm dia nominal bore (DSR- 2023 - 18.12.8)
150
758
113773.5
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 50 mm nominal bore (DSR- 2023 - 18.17.4)
16
747
11960.64
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqm (DSR-2023-8.2.2.2)
800.47
3739
2993677.75
... More
Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.
TV antenna socket outlet (DSR- 2022 E&M - 1.24.7)
626
112
70443.78
... More
Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish of size Size of Tile 600 x 600 mm (DSR-2023- 11.41 A 3.1)
661.68
1066
705747.89
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply and all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 25 mm nominal dia Pipes (DSR- 2023- 18.7.3)
350
292
102333
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40mm dia (DSR- 2023- 17.28.1.2)
26
84
2209.22
... More
External work
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25mm dia nominal bore (DSR- 2023 - 18.12.3)
100
340
34058
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 40 mm nominal bore (DSR- 2023 - 18.17.3)
4
601
2406.04
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle confirming to IS:903 suitable for instantaneous connection to interconnect hos pipe coupling as required. Gun etal
4
1836
7347.64
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 15mm nominal bore (DSR- 2023 - 18.46.1)
2
231
463.6
... More
India marks-II hand ISI market with Cylinder & Conection road complete
2
7500
15000
... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : Pipes, cables etc, not exceeding 80 mm dia. (DSR-2023-2.10.1.1)
300
156
47097
... More
Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete : 50 to 80 mm nominal bore (DSR- 2023 - 18.13.2)
14
1299
18199.58
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation M-150 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) (DSR - 2023- 6.4.1 (AR))
312.51
8480
2650175.43
... More
Supplying & fixing air vessel made out of 250 mm dia,8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and painting with synthetic enamel paint of approved shade as required.
2
13871
27742.16
... More
Providing precast cement concrete Jali 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 6 mm nominal size ), reinforced with 1.6 mm dia mild steel wire, including centering and shuttering, roughening cleaning, fixing and finishing in cement mortar 1:3 (1 cement: 3 fine sand) etc. complete, excluding plastering of the jambs, sills and soffits. 40 mm thick (DSR- 2023- 5.18.2)
33
1242
41005.47
... More
Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR- 2023 - 10.2)
30175.19
97
2937554.75
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. (DSR-2022 E&M - 1.26)
73
30
2219.93
... More
Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 25mm nominal bore (DSR- 2023 - 18.46.3)
2
319
639.66
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand). Ordinary cement without any pigment (DSR- 2023- 11.20.4)
141.07
769
108505.4
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. (DSR- 2023- 12.44)
90
39
3584.7
... More
Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before but excluding supply and cost of other fIttlings such as elbow,bend,tee and y-tee including supply of al marerial labour and T&P.Required for proper completion of work. 110 mm O.D. (MR)
65
450
29250
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (DSR-2023-10.30.1)
126.77
775
98272.1
... More
Providing and fixing Bail plug/ Bottom plug of required dia to the bottom of pipe assembly of tubewell as per IS:2800 (part I). 200 mm dia. (DSR- 2023 - 23.15.3)
2
260
520.76
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm (DSR- 2023- 12.43.2)
108
270
29197.8
... More
Fixing of Door, windows / ventilators chaukhats in position.
(c) Ventilator chaukhats(MR)
44
75
3300
... More
Cement plaster skirting up to 30 cm height, with cement mortar 1:3 (1 cement : 3 coarse sand), finished with a floating coat of neat cement. 18 mm thick. (DSR- 2023- 11.6.1)
121.78
482
58705.27
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 32 mm diameter pipe (DSR- 2023 - 18.41.4)
230
120
27616.1
... More
Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres. (DSR- 2023-16.1)
8890.94
159
1417126.93
... More
Supplying & fixing orifice plate made out of 6 mm thick stainless steel(grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required:
2
1004
2008.74
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge. Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineerin- charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test. All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (DSR-2023-22.7.1)
1101.9
1226
1351601.56
... More
Constructing masonry Chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for sluice valve, with C.I. surface box 100 mm top diameter, 160 mm bottom diameter and 180 mm deep ( inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation M-150 (DSR- 2023 - 18.33.1)
58
7909
458736.5
... More
Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) as per standard design with 20x20mm sq bars. (DSR- 2023- 19.15.1)
78
396
30935.58
... More
Providing orange colour safety foot rest of minimum 6 mm thick plastic encapsulated as per IS : 10910, on 12 mm dia steel bar conforming to IS: 1786, having minimum cross section as 23 mmx25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm tread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture’s permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design. (DSR- 2023 - 19.16)
88
403
35478.96
... More
Supplying and fixing brass batten/angle holder including connectionetc. as required. (DSR- 2022 E&M - 1.34)
215
99
21414
... More
Supply and fixing of UPVC S.W.R. plain bend confirming to IS-14735. Size 75 mm
13
150
1950
... More
Providing and fixing soil, waste and vent pipes : 75 mm diameter : Sand cast iron S&S pipe as per IS: 1729 (DSR- 2023- 17.35.2.1)
8
760
6085.68
... More
Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration (DSR-2023-2.35.3.1)
1742.68
225
393427.44
... More
Greece machine (MR)
1
13500
13500
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required: White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (DSR- 2023- 17.1.1)
15
4927
73913.25
... More
Providing and fixing cup board shutters with 25 mm thick veneered particle board IS : 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. With non decorative veneering on both sides (DSR- 2023 - 9.130.2)
198.3
1317
261256.28
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore (DSR- 2023 - 18.17.2)
14
502
7029.68
... More
Extra for fixing the louvers / shutters complete with frame for exhaust fans of all sizes. (DSR- 2022 E&M- 1.51)
17
157
2675.46
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (DSR- 2023- 18.49.1)
33
369
12177.66
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. (DSR- 2022 - E&M - 1.25)
118
280
33104.9
... More
Erection of pole in cement concrete 400x400x1000mm deep 1:3:6 ratio cement concrete foundation including excavation, refilling, secured with holding clamps, bolts, nuts, alighnment of poles casting etc. including 100 mm thick lean concrete shall be provided at the bottom.
20
4950
99000
... More
Providing, laying, testing & Commissioning of 'B' class heavy duty MS pipe confirming to IS 1239 including welding, fittings like elbows,tee, flanges,tapers,nut bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of syntetic enamel paint of required shade complete as required: 100 mm dia
132
1306
172419.72
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 6 sqmm. (19mm) (DSR- 2022 E&M- 9.1.1)
4
182
729.88
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter (DSR- 2023 - 19.19.2.2)
8
853
6830.48
... More
Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing/ casing pipe, removable as per requirement, all complete for borewell of: 200 mm dia (DSR- 2023 - 23.13.3)
2
233
467.68
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 65mm dia nominal bore (DSR- 2023 - 18.12.7)
100
652
65284
... More
Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required. 50 mm Dia (Rate taken From Civil DSR 2023-18.12.6)
1165
579
675082.55
... More
Supply of 110mm dia plain PVC (6 kg/sqcm) Pressure
54
300
16200
... More
Supply of PVC Soket 110m dia
10
70
700
... More
Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, "C" curve including connections, painting etc. as required. (DSR- 2022 E&M- 1.57)
117
552
64670.58
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. (DSR-2023-5.22.6)
2621.71
7852
20588000.24
... More
Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (DSR-2023-10.1)
3218.5
85
275020.83
... More
Painting with silicon & acrylic emulsion based water thinnable sealer of approved brand and manufacture on wet or patchy portion of plastered surfaces : Two coats Internal wall surface) (DSR-2023-13.51.2)
6538.17
117
769804.14
... More
Supplying & laying 25 mm dia MS flexible pipe with PVC coating along with all ancillaries and accessories like coupler etc. as required.
120
40
4836
... More
Providing and fixing ball bearing for rolling shutters. (DSR- 2023- 10.7)
20
358
7170
... More
Providing and fixing C.P. Brass extension nipple (size 15 mm x 50 mm) of approved make and quality as per direction of Engineer-in-charge. (DSR- 2023- 18.53A)
15
54
816.9
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (DSR-2023- 11.46.2)
95.75
1181
113156.39
... More
Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, including providing and fixing phenolic laminated sheet cover on the fan box etc. as required. (DSR- 2022 E&M- 1.45)
119
257
30671.06
... More
Supply & using of PVC cemnt solvent
2
200
400
... More
15 mm cement plaster on the rough side of single or half brick wall of mix : 1:4 (1 cement: 4 coarse sand) (DSR-2023- 13.5.1)
250.75
299
75177.36
... More
Nylon mesh narial rope around stariner
2
300
600
... More
Providing and laying matt finished vitrified tile of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:
15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge. (DSR- 2023- 16.89)
1036.23
1059
1098300.18
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality : 32mm dia nominal bore. (DSR- 2023- 18.40.4)
207
16
3345.12
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge. (DSR- 2023 - 23.5)
7.06
1099
7761.27
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554. 16 sqmm 4 core (MR)
50
309
15480
... More
Centering and shuttering including strutting, propping etc. and removal of form for Edges of slabs and breaks in floors and walls Under 20 cm wide (DSR- 2023- 5.9.16.1)
2244.92
151
340891.1
... More
Vaccum Cleaner 80 ltr. capacity with 3 motors( wet and dry) (MR)
1
20000
20000
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 50mm dia nominal bore (DSR- 2023 - 18.12.6)
528.4
554
293230.3
... More
Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 300 x 10mm (DSR- 2023- 9.97.1)
296
94
28040.08
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554. 10 sqmm 2 core (MR)
280
262
73584
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. (DSR-2023- 2.27)
463.55
1546
716819.81
... More
Providing and laying damp-proof course 40 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5 mm nominal size derived from natural sources) (DSR-2023-4.10)
248.63
299
74377.67
... More
Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Above 35 sq. mm and Upto 95 sq. mm. (DSR- 2022 E&M- 7.1.2)
50
307
15396.5
... More
Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. (DSR- 2022 E&M- 5.4)
171
5681
971456.13
... More
Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required. (DSR- 2022 E&M- 1.32)
91
445
40544.14
... More
Supplying & laying of 2X1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required.
120
272
32754
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) (DSR-2023-5.1.2)
724.49
6586
4771846.14
... More
Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.
2X2.5 sqmm + 1x 2.5 sqmm earth wire (DSR- 2022 E&M - 1.14.2)
4265
209
891768.85
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32mm nominal bore (DSR- 2023 - 18.17.2)
15
502
7531.8
... More
Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 3.5 X 70 sqmm. (38mm) (DSR- 2022 E&M - 9.1.23)
4
355
1423.28
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm nominal dia Pipes (DSR- 2023- 18.8.2)
350
391
137004
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 100mm diameter (DSR- 2023 - 19.1.1)
45
323
14535
... More
Excavating trenches by mechinical / manual means of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia (DSR- 2023- 2.10.1.2)
228.59
256
58612.76
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation M-150 (DSR- 2023 - 19.32.1)
2
19558
39117.96
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings and fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm nominal dia Pipes (DSR- 2023- 18.8.1)
600
362
217476
... More
INTERNAL HYDRANT SYSTEM
Supplying, Installation, Testing & Commissioning of Electric driven terrace pump suitable for automatic operation and consisting of following, complete in all respects, as required:(Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical seal confirming to IS 1520. (b) Suitable HP Squirrel cage indution motor, TEFC type synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, confirming to IS-325.(c) M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. (d) Suitable cement concrete foundation duly plastered with anti vibration pads.450 lpm at 35 m head
2
65540
131081.84
... More
Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density. (DSR- 2023- 16.4)
2044.91
762
1558875.79
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. (DSR-2023-11.5)
23.94
769
18410.34
... More
Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper (DSR- 2023- 9.101.2)
38
52
2001.84
... More
Supplying and stacking at site. 63 mm to 45 mm size stone aggregate (DSR-2023-16.3.2)
889.1
1191
1059149.27
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554. 6 sqmm 2 core (MR)
100
248
24840
... More
Providing and filling sand of grading zone V or coarser grade, allround the G.I. pipes in external work : 80 mm diameter pipe (DSR- 2023 - 18.41.8)
150
205
30778.5
... More
Painting G.I. pipes and fittings with synthetic enamel white paint with two coats over a ready mixed priming coat, both of approved quality for new work : 40 mm diameter pipe (DSR- 2023 - 18.38.5)
40
31
1242
... More
Fire man axe.Make :- Rcube Fire Protection Services Pvt. Ltd. /R.K. Engineers Services. CE Certified,ISO 13485:2016 & OHSAS 18001:2007 Approved.
12
1950
23400
... More
Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connection etc. as required. (DSR- 2022 E&M- 1.33)
494
66
32678.1
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws : 30 mm thick shutters with ISI marked M.S. pressed butt hinges bright finished of required size Second class teak wood (DSR-2023-9.27.2.1.1)
72.03
3150
226929.07
... More
Providing and laying Non Pressure NP-3 class (Medium duty) R.C.C.pipes including collars/spigot jointed with stiff ixture of cementmortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete. 450 MM DIA RCC pipes (DSR- 19.35.1)
26.8
1948
52229.98
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete : 150mm diameter (DSR- 2023 - 19.1.2)
558.99
506
283198.57
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc. Internal work - Exposed on wall 15mm dia nominal bore (DSR- 2023- 18.10.1)
10
266
2667.9
... More
Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : 250x16 mm (DSR-2023-9.96.2)
296
189
56166
... More
Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : W.C. pan with ISI marked white solid plastic seat and lid. (DSR- 2023- 17.2.1)
9
4744
42697.53
... More
12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or rounded angles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. 1:6 (1 cement: 6 coarse sand) (DSR-2023- 13.4.2)
5601.9
250
1401707.42
... More
Supply & fixing of fire extinguisher, ABC Type 6.00 kg. capacity(ISI Marked IS:15683 & TAC approved) comlete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.PWD-2018
16
9100
145600
... More
Development of bore by manual labour till discharge is free from turbity complete item
2
1000
2000
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. (DSR- 2023- 17.7.4)
25
1368
34207.5
... More
Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554.70 sqmm 3.5 core (MR)
20
552
11052
... More
Providing, installation, testing and commission of non-return valve of following sizes confirming to IS: 5312 complete with rubber gaskets GI bolts, nuts, washers etc as required: 100 mm dia
2
8401
16802.84
... More
Providing/Fixing of Fire Hose cabinet box made out of 18 gauge MS sheet including two coats of post office red paint over one coat of primer with 4 mm, thick glass door in front painted “FIRE” in red luminous paint. The size of the box should be 750 mm X 600 mm X 250 mm size capable of accommodating a pair of hose with coupling and nozzle. The box should be floor mounted type with railway coach lock arrangement and lever for opening the door after breaking the glass complete. Make : Standard Make
12
9500
114000
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws (a) Single leaf (DSR- 2023- 9.20.1)
121.18
2529
306515.12
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame of required shape and approved quality. L.D. -2.5- Circular shape 450mm internal diameter (DSR- 2023 - 19.19.1.3)
8
851
6813.28
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (DSR- 2023-4.1.8)
578.02
4960
2866996.54
... More
Providing & fixing fly proof wire gauze to windows, clerestory windows & doors with M.S. Flat 15x3 mm and nuts & bolts complete. Stainless steel (grade 304) wire gauze of 0.5 mm dia wire and 1.4 mm aperture on both sides. (DSR-2023-10.29.2)
149.86
825
123689.95
... More
Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories including connection etc. as required. (DSR- 2022 E&M- 1.35)
122
90
11038.56
... More
Fixing of Door, windows / ventilators chaukhats in position. (a) Door chaukhats (MR)
86
150
12900
... More
Making plinth protection 50 mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75 mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (DSR- 2023-4.17)
268.43
545
146452.72
... More
Supply of labour T&P and jointing & lowering of PVC pipe consisting of 110mm & 50 mm dia bore long ribbed PVC Strainer & Cavity complete 30 metre B.G.L
60
6
360
... More
Providing and fixing 1 mm thick M.S. sheet door with frame of 40x40x6 mm angle iron and 3 mm M.S. gusset plates at the junctions and corners, all necessary fittings complete, including applying a priming coat of approved steel primer. Using M.S. angels 40x40x6 mm for diagonal braces (DSR-10.5.1)
35.7
4226
150879.98
... More
Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standard facilityes as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required. 6 Zone
2
9259
18518.08
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements