UP State Construction And Infrastructure Development Corporation Limited Tender
... More
The UPSCIDC has issued a formal invitation for competitive bids for the UP State Construction And Infrastructure Development Corporation Limited project, for Construction Work Of Community Hall At Vill. Chamari, Block Kadaura Distt. Jalaun in Jalaun, Uttar Pradesh. The bid opening date for this tender is 20-05-2025 and the last date for bid submission is 30-05-2025. Interested bidders for UP State Construction And Infrastructure Development Corporation Limited tender can download the important documents here to check the tender amount, scope of work, eligibility criteria and technical requirements.
UP State Construction And Infrastructure Development Corporation Limited - UPSCIDC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date20 May 2025
Closing DateCancelled
Tender AmountRefer Documents
Costs
EMD
₹ 99,500Document Cost
₹ 1,652Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_SCIDC_1040719_1Tender No
33/SE/Jhansi/ET/2025-26Tender Authority
UP State Construction And Infrastructure Development Corporation Limited ViewPurchaser Address
-Website
http://http://www.upscidc.org/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Earth work Excavation in trenches for foundation. in ordinary soil (loan clay or sand) including lift up to 1.50 m and lead upto 50 m.
12.52
122
1537.21812
... More
Boring with hydraulic piling rigs with power unit ,providing and ininstalling cast in situ single under reamed piles of specified diameter and length below pile cap in M-25 cement concrete ,to carry of safe working load not less than specified .excluding the cost of steel reinforcement bul including the cost of boring with bentonite solution and the length of the pile to be embedded in pile cap etc. all complete (length of pile for payment shall be measured upto to the bottom of pile cap) 300MM DIA
188.5
2120
399723.67500000005
... More
Extra over single under ream for providing additional bulbs in under reamed piles, under specified (only the Nos. of extra bulbs are to be paid)
62
1816
112633.912
... More
Earth filling in plinth under floors including watering ramming, consolidating and dressing etc. complete including lead upto 30 m. and lift upto 1.5 m. including cost of supplied earth.
60.55
484
29339.684149999997
... More
Sand filling in flooring includng watering ramming etc complete.
21.19
1469
31129.14831
... More
Providing and laying in cement concrete 1:4:8 (1cement:4 coarse sand:8 graded stone aggregate 40 mm nominal size and curing complete, including cost of formwork in foundation and floors.
28.83
4712
135847.70958
... More
First class brick work in 1:6 cement and coarse sand mortar in foundation including supply of all plants etc. required for proper completion of the work.
8.26
4933
40751.13126
... More
Centering and shuttering including strutting, propping etc. and removal of form for :column,plinth bend,lintel,sunshade,platform & slab.
180.48
509
91933.98528
... More
R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Foundation
7.71
7507
57880.88979
... More
R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P=DOM!B107
8.55
7507
64186.978950000004
... More
R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P COLUMN
7.71
7507
57880.88979
... More
R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P DOM!B119
1.87
7507
14038.55563
... More
R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&P Slab Band
2.16
7507
16215.65784
... More
R.C.C. works with cement approved coarse sand and 20 mm approved stone aggregate in the proportion 1:1.5:3 (1 cement:1.5 coarse sand : 3 stone aggregate ) excluding supply of reinforcement and its bending & binding.with binding wire including supply of all materials, labours,T&PSlab
7.59
7507
56980.019909999995
... More
Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete.
4702.422
74
350810.086044
... More
First class brick work in 1:4 cement and coarse sand mortar in foundation and plinth including supply of all plants etc. required for proper completion of the work.
1.41
5098
7188.825779999999
... More
First class brick work in 1:6 cement and coarse sand mortar in superstructure including supply of all plants etc. required for proper completion of the work.
26.62
6298
167674.24234
... More
First class brick work in 1:4 cement and coarse sand mortar in superstructure including supply of all plants etc. required for proper completion of the work.
83.52
626
52287.278399999996
... More
12/15 mm wall plaster 1:4 cement :coarse sand including cost of all material labour T&P etc.complete.
455.68
255
116468.16256000001
... More
6-10 mm thick ceiling plaster 1:3 cement :coarse sand including cost of all material labour T&P etc.complete.
54.97
273
15032.81081
... More
Providing, fabriction and fixing of ms angle iron chaukat make of 40*40*6 mm and 35*35*5 mm angle iron including supply of all material Labour T.& P. etc. complete as per direction of Engineer in charge.
128.88
90
11633.997599999999
... More
Providing, fabrication and fixing of Z-section windows, ventilators openable type with 10 mm sq bar grill as per approved drawing and design including supply of all material Labour T.& P. etc. complete as per direction of Engineer in charge.
129.6
135
17499.24
... More
Providing of Pcc with 1:2:4 cement coarse sand and stone aggregate for fixing of hold fast.
0.1
6844
684.475
... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws.
12.92
2191
28312.21616
... More
Providing and fixing ISI marked oxidised M.S sliding door bolts with nute and screws etc. complete=DOM!B245
6
133
803.922
... More
Providing and fixing ISI marked oxidised M.S handles conforming to IS: 4992 with necessary screws etc. complete DOM!B248
12
27
331.608
... More
Providing and fixing ISI marked oxidised M.S tower bolts black finish (Barrel type) with necessary screws etc. complete 200x10mm
6
48
288.036
... More
Providing and fixing ISI marked oxidised M.S tower bolts black finish (Barrel type) with necessary screws etc. complete 150x10 mm
6
41
246.738
... More
40mm. thick in flooring 1:2:4 cement: coarse sand:20 mm. stone aggregate with floating coat of neat cement including cost of all materials Labour and T & P etc. complete
322.7
424
137101.35390000002
... More
Fixing of glass stripsProviding and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick
484.05
63
30720.7173
... More
Providing and fixing ceramic glazed wall tiles as per direction of Engineer-in-Charge,over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointingin white cement mixed with pigment of matching shade complete.
39.21
877
34389.99312
... More
Providing and laying Ceramic glazed floor tiles as per direction of Engineer in charge laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including pointing the joints with white cement and matching pigment etc, complete.
10.17
769
7827.66594
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1:4(1 cement : 4 coarse sand) :
59.55
1347
80252.67659999999
... More
Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound.
69.04
1165
80450.86216
... More
Providing and applying two coat white cement Based wall care putty of approved make over the plastered wall surface to prepared the surface evev and smooth complete.
510.65
107
55121.6036
... More
Finishing walls with two coat acrylic smooth exterior paint of approved shade with in new work applied @ 1.67 litr /10 sqm over and including primimg coat of exterior primer applied @2.20 kg /10 sqm.
199.61
111
22174.87451
... More
Finishing wall with water proofing cement paint of required shade
311.04
80
25151.627520000002
... More
Painting with synthetic enamel paint two coats of approved brand and manufacture of required colour to give an even shade.
344.44
125
43088.75512
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with :4.0 mm thick glass panes
5.85
736
4308.197399999999
... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion,(i) Single socketed pipes.
45
261
11747.565
... More
Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.
8203.115
92
758656.8876599999
... More
Providing and fixing precoated galvanised iron profile sheets size ,shape and pitch of corrugation as approved by Engineer -in-charge)0.50 mm(+0.05%) total coated thickness with zinc coating,120 grams per Sqm. as per IS:277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns epoxy primer on both side of the sheet should have protective goard filmof 25 microns minimum to avoide scratches during tranportation and should be supplide in single length upto 12 meter or as including cutting sheets to size and shape wherever required.
297.49
510
152000.13558
... More
Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete.
18.4
368
6775.597599999999
... More
Making of apron drain.
22
1516
33372.922
... More
Construction of Septic tank 25User.
1
121766
121766.013
... More
Construction of soak pit 2.00 m dia and 2.50 m depth with all respect.
1
18581
18581.029
... More
Construction of manhole 600x600x450 mm with all respect.
3
4747
14242.533000000001
... More
Tube well Boring with submersible (1 HP) and India mark ii hand pump complete.
1
109687
109687.95
... More
Providing and Laying interlocking Paver bricks tile in Flooring 60mm thick
249.377
672
167670.12221200002
... More
Sanatary Work
-
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 20MM DIA
10
189
1897.4
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.25MM DIA
10
245
2458.39
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply,including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the walls etc. 20MM DIA
45
371
16734.195
... More
Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) :20MM DIA
3
373
1120.491
... More
Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete :15 mm nominal bore
3
281
844.284
... More
Providing and fixing uplasticised P.V.C. connection pipe with brass unions 45 cm length and 15 mm nominal bore
10
58
587.97
... More
Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank
1500
7
11413.5
... More
Making plate form for supporting the water storage tank of required size including brick work with 1:4 cement coarse sand and 20 mm thick plaster in 1:3 cement coase sand mortar and neat cement finishing complete
3
1425
4275
... More
Providing and fixing brass bib cock 15 mm of approved quality prayag or equilent make.
10
244
2443.52
... More
Providing and fixing c.p angle valve of approved quality prayag or equilent make.
10
397
3972.57
... More
Cutting holes upto 30x30 cm in walls including making good the same : With F.P.S. bricks.
10
288
2883.1099999999997
... More
Cutting holes upto 15x15 cm in R.C.C. floors and roofs for passing drain pipe etc. and repairing the hole after insertion of drain pipe etc. with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete so as to make it leak proof.
3
312
937.977
... More
Providing and fixing of C.P. soap disc of approved quality.
4
166
665
... More
Making of brick pillars for supply to hold the GI/CI pipe line of 230x230x230mm size including B/w and plaster complete
2
171
342
... More
Making of water tank connection inlet, outlet, overflow, clean outlet each point
3
194
584.25
... More
Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete including cutting and making good the walls and floors wherever required :White Vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests.
4
4681
18724.7
... More
Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required :One urinal basin with 5 litre white P.V.C. automatic flushing cistern
2
4329
8658.658
... More
Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require : White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps.
2
1592
3184.352
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm,including painting of fittings and brackets, cutting and making good the walls wherever required :Kitchen sink without drain board 610x510 mm bowl depth 200 mm
2
3417
6835.342
... More
Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :Rectangular shape 453x357 mm
2
941
1883.98
... More
Providing and fixing P.v.c waste and vent pipes of approved make 110 mm dia.
5
142
712.5
... More
Providing and fixing of Pvc nahani trap 90 mm of approved make
5
332
1662.5
... More
Construction of BOUNDARY WALL & GATE
-
-
-
... More
Construction of Boundary wall having height 1.80 metre,including earth work, concerte work 1:4:8 cement : sand and brick aggregate 40 mm ,brick work in foundation 1: 6 cement coarse sand and 1:4 cement coarse sand in super structure ,R.C.C. band in 1:1.5:3 reinforcement, plaster 1:6 cement coarse sand and wall finishing including supply of all materials labour and T&P etc required for proper completion of work
70
8202
574161
... More
P/F of MS Gate of size 3.60x2.00m from Outer Frame of 50x50mm Hollow square pipe,Vertical member inside Frame is 50x25mm Hollow Rectangular Pipe,Vertical square Bars of 10x10mm & MS sheet of 0.80mm with fabrication and fixing complete.
1
32129
32129
... More
Electrical Work
-
-
-
... More
Wiring for light point/fan point /exhaust fan point /call bell/Sodium point with 1.50 Sq. mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable G I box and earthing the point with 1.50 sq. mm FRLS PVC insulated copper conductor single core etc. as required. Group C
47
1149
54038.767
... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.
8
373
2990.79
... More
Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 2.5 sq. mm + 1 x 2.5 sq. mm earth wire
190
215
40950.9375
... More
Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 4 sq. mm + 1 x 4 sq. mm earth wire
125
261
32721.625000000004
... More
Wiring for Circuit/Submain wiring along with earth wire with the Following size FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit as required. 2 x 6 sq. mm + 1 x 6 sq. mm earth wire
50
344
17203.3
... More
Supplying and Drawing following sizes of FRLS PVC insulated copper conductor single core cable in the existing surface / recessed medium class PVC conduit as required. 3 x 2.5 sq.mm
75
107
8053.049999999999
... More
Supplying and fixing 5 A to 32 A rating, 250 / 415 V, 10 Ka, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. required. Single pole
20
200
4012.7999999999997
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 40 Amp.
2
340
681.8625
... More
Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. required. 63 Amp.
1
413
413.03625
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way , Double door
1
2016
2016.589
... More
Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface / recess, complete with tinned copper bes bar, neutral bus bar, earth bar, din bar,interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 12 way, double door
2
1814
3628.762
... More
Supplying and fixing Cable End Box (Loose Wire Box) suitable for following single pole and neutral, sheet steel, MCB distribution board, 240 Volts, on surface/ recess, omplete nd commissioning etc. as required. For 8 way, Double door SPN MCBDB
3
652
1956.2400000000002
... More
Installation, testing and commissioning of ceiling fan, including wiring of the down rods of standard length (upto 30 cm) with 1.50 sq. mm, FRLS PVC insulated, copper conductor, single core cable including providing and fixing phenolic laminated sheet cover on the fan box etc.. as required.
16
265
4251.056
... More
Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc.. as required. Upto 450 mm sweep.
5
352
1763.4375
... More
Supplying and fixing suitable size G I box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.
5
459
2296.3875
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but modular plate etc. as required.
16
310
4965.84
... More
Electrical Work Market Rate - (Non Scheduled Items) -
-
-
-
... More
S/F of 100 Amp four pole change over switch on 40 mm x 40 mm x 6 mm angle iron frame, including the cost of labour, T&P painting & other material required for proper completion of the work as per direction and satisfaction of Engineer in charge.
1
8312
8312.5
... More
Supply & Laying of 25 mm x 3 mm G.I. Strip from earth electrode directly in the ground as required complete in all respect.
10
85
855
... More
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000 mm, Outer Dia 50 mm, inner Dia 25, terminal Dia 12 mm, outer G.I. pipe of 16 swg and inner G.I. pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25 mm x 3mm G.I. strip upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.
1
9538
9538
... More
S/F of 50 Amp. to 63 Amp. SPMCB (10 KA) Cat-B
3
370
1111.5
... More
Supply and fixing of 16 gauge M S drum with louvers duly painted including making hole in the wall for exhaust fan and finishing properly complete in all respects .
5
769
3847.5
... More
Supply and fixing of hexagonal / round G P fan box of approved make made up 1.0 mm thick ISI Marked G.P. sheet spot welded four to Eight holes of 25.40 mm for pipe entry of the box. Holes should be semi-shuttered type with 0.50 mm G P sheet made upper and lower cover duly screwed fitted with 300 mm round zink coted M S bar x 12 mm and brand name should be embossed, fixing with wiring conduit laid in the R.C.C. roof before concreting along with supply of all material, labour, T&P etc. required for proper completion of work/Fan Hook
16
142
2280
... More
Supply and fixing of 36 watt to 46 watt indoor recess mounting LED Square Fitting for Armstrong Ceiling having Powder coated die cast aluminium housing body with extended heat sink, diffuser of Special Polycarbonate meterial and driver set complete in all respect. Cat-AA
3
3743
11229
... More
Supply and fixing of LED Tube Light with Metal heavy duty box type batten Light fitting 1 x 22 watt suitable for upto 1 x 22 watt LED Polycarbonate tube light complete including tube suitable for both surface & suspended complete in all respect. Cat AA
8
969
7752
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 52 watt to 72 watt. Confirming to IP 66 protection complete in all rescept Cat-AA
2
4446
8892
... More
S/F of Highbay Light 80 watt with bracket, clamp, chain complete in all respect.
8
11875
95000
... More
S/F of Fan Downrod, 1.5 mtr. long.
12
332
3990
... More
Supply & Fixing of Fan Sheet of Backelite
4
36
144.4
... More
S/F of LED Bulb 9 watt ISI
12
142
1710
... More
Supply & Fixing of light duties exhaust fan 12”dia ISI double ball bearing metalic Usha / Crompton/Bajaj make
4
2185
8740
... More
S&F of Fire extinguisher, ABC Type 6.00 Kg. capacity (ISI marked IS: 15683 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
4
8645
34580
... More
S&F of Co2 type Fire extinguisher, 4.5 Kg. capacity (ISI marked IS: 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion of work.
2
11381
22762
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge.
2
465
931
... More
Supply & Fixing of heavy duties exhaust fan 12”dia ISI bearing metalic Usha / Crompton/Bajaj make
1
2660
2660
... More
Supply & Fixing of exhaust fan luvers 12”dia
5
475
2375
... More
S/f of ceiling fan 1200 mm sweep. Single star rated Usha / Crompton/Bajaj mak
4
2042
8170
... More
S/f of ceiling fan 1400 mm sweep. Single star rated Usha / Crompton/Bajaj mak
12
2137
25650
... More
S/F of Kit-Kat fuse 200 Amp 02 nos. with neutrail link ,wooden ply board ,Hole fasner with connection
1
1187
1187.5
... More
S/F of Wall Fan 16" Usha / Crompton/Bajaj make
2
2375
4750
... More
S/L of Service Cable 10 sq.mm x 2 core with G.I. support wire.
30
33
997.5
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements