Sashastra Seema Bal Tender

Over current earth fault relay.

Space heater in ht panel 15mm X 3 mm.

End termination kit 3 core 240 sq mm 33 kv.

Tripping, & closing coil 24 M DC.

33 kv, 630 Amp., EDO VCB Moving breaker.

Master trip relay

TNC switch.

80 AH 12-volt battery.

Potential transformer 33 KV/110V.

Operating mechanism.

33 KV insulator

Repairing of the existing Feeder pillars in dilapidated condition by dismantling of all i/c & O/g cables from terminals/ connecting blocks, reconnecting it properly by providing thimbles of various sizes from 4 x 25 to 3½ x 300 sg. mm, polyamid terminal blocks, replacing the burnt bakelite isolator blocks, providing sleeves on the phase leads of broken insulation, welding the broken doors of the feeder pillar by providing the Hinges, Painting the foeder pillar including making it fully functional etc, as regd.

Fabricating, supplying, erection, testing & commissioning of floor mounted compartmentalised cubical out door type IP55, double door feeder pillar, fabricated from 1.6 / 2 mm. thick CRCA sheet, with base frame fabricated from 50mm x 50mm x 5mm angle iron, powder coated after seven tank treatment process complete with 4 strip 400 Amp capacity alu. bus bar suitable for 415 volts, 3 phase, 4 wire, 50 Hz, A.C. Supply including making connections & inter connections, making provision for cable alley, earth terminals, gland plate, earthing, sign writing in letters showing main incoming and outgoing, cable alley, making C.C. (1:3:6) foundation for installation complete etc as reqd. (Depth shall not be less than 350 mm) with following accessories in the existing panel i/c testing and commissioning ete as required (Quarter feeder Pillars). Incoming (i) 320 Amp 4P 36 KA MCCB with thermal magnetic release having OL & SC protection - 01 No. (ii) MCCB Spreader link - 04 Sets (iii) Digital Ammeter & Voltmeter with selector switch - 1 Set (iv) RYB Indicating lamp - 3 Nos. (v) 400/S Amp ratio 15VA CL-ITape wound - 3 Nos. (vi) 6A SP MCB - 03 No. Outgoing (i) 63 Amp 3P MCCB 25 KA with thermal magnetic release having OL & SC protection - 04 Nos. (ii) 100 Amp 3P MCCB 25KA with thermal mangnetic release having OL. & SC protection - 02 Nos. (iii) MCCB Spreader link - 18 Sets

Supplying, installation, testing & commissioning of powder coated factory assembled hut type double door, both side openable floor mounted outdoor feeder piller suitable for 3 phase, 4 wire 415 Volt AC supply and of following sizes, fabricated out of 1.6/2mm thick CRCA sheet tapered, drip proof, including 50mm x 50mm x 5 mm MS angle iron base frame duly welded with 4 Nos. legs for grouting in Cement Concrete 1: 3: 6(1 cement, 3 coarse sand, 6 graded stone agreegate of 40mm nominal size) foundation (450mm above the ground level and 450mm below the ground level) all around, earthing studs and detachable individual gland plates for each cable and with the following mountings /accessoires & having individual compartment for switch gear etc. duly connection and inter connection and painting with epoxy based primer and two coats of epoxy paint of approved shade complete with locking arrangement etc. as required. (Street Light Feeder Pillar). Minimum front surface area not less than 1 sqmtr 350 mm deep Incomer. 100 Amp. 16 KA 3 Pole MCCB with thermal magnetic release with O/L, S/C protection and Extended Rotatory handle - 1 No. 40 Amp Power contactor - 01 No. Digital Multifunction meter of size 96 mm x 96 mm with CTs 1 No. LED Phase indication Lamp for RYB with protection MCBs - 3 Nos.LED Phase indication Lamp for ON/OFF with protection MCBs - 2 Nos.CT 100/5 Amp, Class 1.0 accuracy 5 VA burden for incoming - 1 Set ... BusBars.. 200 Amp TPN busbars of aluminium alloy of high conductivity, DMC / SMC busbar support withstand breaking capacity 16 KA with shortckt current for 1 Sec. The current density of AL. busbar shall be considered 1.0 Amp / Sqmm.Outgoing,,, 40 Amp. 10 KA TP MCCB with thermal magnetic release with O/L, S/C protection - 1 Nos. 40 Amp. 10 KA TPN MCB C Curve - 1 Nos.32 Amp. 10 KA DP MCB C Curve - 20 Nos. 10 Amp Time Switch - 1 Set,,, The 2 Nos, copper earth bus shall be provided of size 20 mm x 3 mm thick independently all along the panel length.,,,, LED Phase indication Lamp for RYB with protection MCBs - 2 Set,,, LED Phase indication Lamp for ON/OFF with protection MCBs - 4 Set

Supplying & laying of 1 Number XLPE insulated, PVC outer sheathed, armoured with galvanized steel strip cables with stranded aluminium conductor suitable for rated voltage of 1.1KV grade of following sizes in the following manner as reqd.In DWC/HDPE pipe,,, 2 x 10 Sq mm

Supplying & laying of 1 Number XLPE insulated, PVC outer sheathed, armoured with galvanized steel strip cables with stranded aluminium conductor suitable for rated voltage of 1.1 KV grade of following sizes in the following manner as reqd.In the existing masonary open duct. 2 x 10 Sqmm

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers ete. conforming to IS 11930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63 mm dia (OD-63 mm & ID-51 mm nominal)

SITC of IP66 LED street light 230V AC, 50 Hz i/e connection ete as req Luminaire type, Bracket Mount LED Street Light, Colour temperature 4500K, Initial luminous flux 4400lm, Luminous efficiency - 110 Im/Watt or better, Service life 50,000 h @ L70, Colour rendering index (Ra) >70, Luminaire Body of pressure die cast aluminium eto complete as required.

Supplying, installation, testing and commissioning of Surface/Recess mounted LED fitting (2' x 2') made out of CRCA powder coated body having with following specification. (i) Waltage - 31-36 watt (ii) Lumen output - not less than 3400 (iii) Colour Temperature - 5700 k to 6500 k (iv) CRI (RA) - ≥ 80 (v) System lumens efficiency - ≥ 100 (vi) Life - L70B 50 @ 50000 burning hours (vii) Mandatory test report - LM-79, LM-80 (viii) THD - <10% complete with all accessories on existing ceiling with suitable 2 Nos. MS chain (each length 1.5 mtr.) and dash fastener including connection with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable and earthing etc. as reqd. a. Inter Road

LT pannel servicing & testing work S/S no-01 & 2

Capacitor pannel servicing and testing work of s/s no-01 & 2

Less Dismantling of following items with buy back etc as reqd.Dilapidated outdoor feeder pillar of front area 2 Sq.mtr (approx) with all accessories and MCCBs.