Saharanpur Development Authority Tender
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of <a href="https://etender.up.nic.in">etender.up.nic.in</a> - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Saharanpur Development Authority - SDA Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date14 May 2022
Closing Date23 May 2022
Tender Amount₹ 2,56,19,795
Costs
EMD
₹ 14,81,000Document Cost
₹ 18,800Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_SDA_699726_1Bid Award Id
ViewTender No
2135/2/SDA/2022-23Tender Authority
Saharanpur Development Authority ViewPurchaser Address
-Website
http://http://www.sdasaharanpur.com/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
1.50 m to 3.00 m BGL (S.I.No-251+254)
230
-
102.5
... More
(a) Sand filling in plinth and under floor including supply of necessary quantity of sand from a distance not exceeding 8 Kms from the site of work and including watering dressing etc. labour & T&P etc.required for proper completion of the work. sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared. including cost of sand S.I.No-255a
64
-
380
... More
Providing and injecting chemical for preconstruction snttemite treatment and creating and chemical barrier under and around the column pits wall trenches basement excavation top surface in plinth filling junction of wall and floor, along the external per meter of binding expansion joints surrouding or pipes and conduit etc. complete (plinth area of the building at ground floor only shall be measured as per IS 6313(part II 1981) Aldrine emulsifiable concentrate or any other approved material such as heptachlor of chlordane will be used. The rate of application of chemical shall be as follows :- 1- Treatment for massonary and foundation 5 liters per sqm. 2- Back fill in immediate contact with foundation 7.5liters per sqm. 3- Treatment of surface of plinth filling 5 liters per sqm. 4- Treatment of soil along external perameter of building 7.5 liters per sqm . 5- Treatment of soil under external perameter 5 liters per sqm. (New Item/ Ch.-19 )
131
-
200
... More
Concrete with 4cm guage stone ballast, fine sand and cement in proportion of 1:4:8 in foundation and under floors including all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 275).
28
-
3926
... More
Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth. (A.R)
41
-
467
... More
R.C.C. work with cement, approved coarse sand and 2cm gauge approved stone grit in the proportion 1:1:2 (M25) excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools and plants etc. required for proper completion of work including cost of binding wire. The Rate excludes making of drip course which shall be paid extra.
-
-
-
... More
In R.C.C. raft foundation and footing. I.No-5.33.1.1/DSR-2021
138
-
6640.81
... More
In Column, Beam & Slab.I.No-5.33.2.1/DSR-2021
127
-
8370.37
... More
M.S. (tor steel or plain) in plain work such as R.C.C or R.B. work including bending for proper shape and including supply of steel and its wastage, Bend, hooks and authorized over lapping shall be measured and including cost of binding wire (A.R.)
300
-
10032
... More
M-150 Brick work in1:4 cement & four coarse sand in foundation and plinth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SI-305(a)
24
-
4300
... More
(a) Same as above item no. but in 1:4 (One cement & four coarse sand) mortar. in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1 brick. SI-305a+309+310
17
-
4730
... More
Stone work (machine cut edges) for wall lining etc. (veneer work) upto 10 metre height, backing filled with a grout of average 12 mm thick cement mortar 1:3 (1 cement : 3 coarse sand) including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of cramps and pins which shall be paid for separately)
-
-
-
... More
40mm thick Red sand stone - exposed face fine dressed with rough backing. (I.No-8.14.1.4/DSR-2021)
727
-
3635.97
... More
As above but 40mm thick White sand stone - exposed face fine dressed with rough backing .(I.No-8.14.3.4/DSR-2021)
940
-
5893
... More
Providing and fixing non corrosive wedge expansion type hold fastner/dash fastner with washer including bolt of minimum size 58.7X12mm on C.C/R.C.C./ brick masonary surface backing including drilling necessary holes etc. complete. (I.No-8.8.1.3/DSR-2021)
8500
-
43.89
... More
Providing and fixing stainless steel cramps of required size & shape in RCC/CC/brick masonary backing with cement mortar 1:2 (1 cement:2 coarse sand) including drilling necessary holes. in stones and embedding the cramp in the holes. (I.No-8.7.2/DSR-2021)
825
-
484.68
... More
Makrana white second quality Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with (I.No-11.23.1/DSR-2021)
115
-
2804.57
... More
Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with :12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) 12.45.1 : 2011 (Board with BIS Certification marks) (I.No-12.45.2/DSR-2021)
72
-
1068.26
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations:
(a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment.
(b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs.
(c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-incharge.
(d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep.
(e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge :
-
-
-
... More
With average thickness of 120 mm and minimum thickness at khurra as 65 mm. (I.No-22.7.1/DSR-2021)
194
-
1378.23
... More
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage. (I.No-22.22/DSR-2021)
140
-
276.02
... More
Landscape
-
-
-
... More
Excavation in foundation in ordinary soil (Loam, clay or sand) including lift upto 1.50 M. and lead upto 30 M. and including filling watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-in charge upto a distance of 30 M. from the foundation trenches. (where machine can not move ) S.I.no-251
700
-
90
... More
Cleaning Jungle including uprooting of rank, vegetation grass, bushes, wood trees and sapling of girth upto 30cm measured at a height of 1 meter above ground level and removal of rubbish upto a distance of 50 meters out side the periphery of area cleared.S.I.no-259
4528
-
3.2
... More
Concrete with 4cm guage stone ballast, fine sand and cement in proportion of 1:4:8 in foundation and under floors including all material, labour, T&P etc. required for proper completion of work. including cost of binding wire (SOR No 275+Diff in cost of brick and stone ballast).
445
-
3926
... More
R.C.C. work with cement, approved coarse sand and 2cm gauge approved stone grit in the proportion 1:1:2 (M25) excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, tools and plants etc. required for proper completion of work including cost of binding wire. The Rate excludes making of drip course which shall be paid extra.
-
-
-
... More
In R.C.C. raft foundation and footing. (I.No-5.33.1.1/DSR-2021)
18
-
6640.81
... More
In Column, Beam & Slab.(I.No-5.23.2.1/DSR-2021)
14
-
8370.37
... More
M.S. (tor steel or plain) in plain work such as R.C.C or R.B. work including bending for proper shape and including supply of steel and its wastage, Bend, hooks and authorized over lapping shall be measured and including cost of binding wire. (A.R.)
16
-
10032
... More
M.S. or iron work in M.S. Grills/Stair case railing/gates/trusher/racks etc. of small size and section such as holding down bolts, hold fasts, tierods, grating, etc. brought to required form including supply of steel bolts, nuts, wastage etc. and their fixing required for proper completion of the work.S.I.No-502
-
-
-
... More
Same as in item 502 above but in M.S. Grills / Stair case railing/gates/trusher/racks etc. S.I.No-502a
21
-
6150
... More
M-150 Brick work in1:4 cement & four coarse sand in foundation and plinth including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. SI-305(a)
102
-
4300
... More
(a) Same as above item no. but in 1:4 (One cement & four coarse sand) mortar. in superstructure including necessary Cutting & moulding of bricks as required thickness of walls not to be less than 1 brick. S.I.No-305a+309+310
59
-
4730
... More
Supply and fixing of 25mm thick Kota stone in flooring 20 mm thick and joint filled with 1:2 cement and coarse sand with approved colouring materials to be given an even shade with 12 mm base coat (bedding) of 1:2 cement & coarse sand morter and polished by hand or machine and finally finished with french manson polish or other approved polish including supply of all materials, labour, Tools & plants etc. required for proper completion of the work. New Item2/Ch.14
2880
-
930
... More
Providing and laying Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. I.No-11.55.1/DSR-2021
50
-
2150.59
... More
20mm thick rough cast exterior cement plaster on walls consisiting 10mm thick backing coat of 1:3 cement mortar (1 cement : 3 coarse sand) and 10mm thick finishing coat of 1:3 cement mortar (1 cement : 3 coarse aggregate of size 6mm to 12mm) including arises, chamfers and/or rounded angles not exceeding 80mm.New Item/Ch.13
667
-
240
... More
Finishing walls with weather coat extrerior wall paint of approved make and quality on new work with two coats to give an even shade inculding supply of all materials, labour, tools and plant etc. requried for proper complication of the work. New Item/Ch.15
667
-
98
... More
Suppy and laying of 80 mm thick precast cement concrete I- shape /zig-zag (all shape) interlocking paver block with top layer of mininum 5 mm thickness having paln dimension of 200x(160+120)mm of O.P. cement smooth high gloss finish, skid resistant, manufactured with rubber moulds through vibro-compression mechanism over 4 cm blanket coat of fine sand & joint filling with fine sand. The compressive strength and weight of concrete paver block shall not be less than 35 MPa (M-30) and 5 kg/no. respectvily confirming to IS:15658-2006 I/C cost of all material, labour, vat , all taxes T&P. required for proper completion of the work as per specifications and as directed by Engineer-in-charge(.New item - 14/Ch.-20 less blanket layer of F. Sand) New Item14/Ch.20
650
-
760
... More
Extra for supply and laying of 60mm thick colour precast cement concrete interlocking paver blocks instead of gray. New Item14+ Diff/Ch. 20
350
-
64.8
... More
Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast
C.C. kerb stone shall be approved by Engineer-in-charge). I.No-16.69/DSR-2021
61
-
7152.55
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :
(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.
(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. I.No-22.5/DSR-2021
187
-
429
... More
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer's specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing ermeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against I.No-22.22/DSR-2021
30
-
276
... More
HORTICULTURE AND LANDSCAPING
-
-
-
... More
Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).
-
-
-
... More
In rows 5 cm apart in both directions. I.No-2.10.1/DSR-2020(Hort)
500
-
16.92
... More
With grass Turf I.No-2.10.2/DSR-2020(Hort)
500
-
12.73
... More
Digging holes in ordinary soil and refilling the same with the excavated earth mixed with manure or sludge in the ratio of 2:1 by volume (2 parts of stacked volume of earth after reduction by 20% : 1 part of stacked volume of manure after reduction by 8%) flooding with water, dressing including removal of rubbish and surplus earth, if any, with all leads and lifts (cost of manure, sludge or extra good earth if needed to be paid for separately)
-
-
-
... More
Holes 1.2 m dia and 1.2 m deep I.No-2.14.1/DSR-2020(Hort)
20
-
133.95
... More
Holes 90 cm dia, and 90 cm deep. I.No-2.14.2/DSR-2020(Hort)
20
-
58.5
... More
Holes 60 cm dia, and 60 cm deep. I.No-2.14.3/DSR-2020(Hort)
20
-
18.5
... More
Holes 45 cm dia, and 45 cm deep. I.No-2.14.4/DSR-2020(Hort)
20
-
8.25
... More
Half brick circular tree guard in bricks, internal diameter 1.25 metre and height 1.2 metre above ground and 0.20 m below ground, bottom two courses laid dry and top three courses in cement mortar 1:6 (1 cement : 6 fine sand) and the intermediate courses being in dry honey comb masonry as per design complete:
-
-
-
... More
With common burnt clay F.P.S. (non modular) bricks of class designation 5.0 I.No-2.15/DSR-2020(Hort)
20
-
1555.74
... More
Providing and fixing M.S. flat iron tree guard 60 cm dia and 2 m high, above ground consisting 4 nos 25 x 6 mm, 2.25 m long and 8 nos 25 x 3 mm 2 m long verticals M.S. flats, riveted to 3 nos 25 x 6 mm M.S. flat iron rings in two halves, fixing together at site with required six numbers of 8 mm dia and 30 mm long bolts, including painting two coats with synthetic enamel paint of approved brand and manufacture over a coat of primer. One name plate of 1 mm thick M.S. sheet of size 250x100 mm shall be welded to the tree guard near the middle height and lettered CPWD / PWD/ any other approved name. The tree guard shall be suitably fixed to the ground by embedding four legs of tree guard in pits of suitable dia and to a depth of 25 cm, refilling the pits with soil and ramming, complete in all respect as per satisfaction and direction of Officer-in-charge I.No-2.16/DSR-2020(Hort)
20
-
3443.9
... More
Plantation of Trees, Shrubs, and Hedge at site i/c watering and removal of unserveiceable material’s as per direction of officer in charge (excluding cast of plant & water) I.No-2.57/DSR-2020(Hort)
-
-
-
... More
Trees Plant
20
-
6.99
... More
Shrubs Plant
30
-
3.49
... More
Hedge Plant /Ground cover
30
-
2.33
... More
Providing & laying Selection no. 1 doob grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same and maintenance for 30 days or more till the grass establish properly, as per direction of the officer in charge I.No-2.34/DSR-2020(Hort)
900.6
-
83.68
... More
Providing and displaying of Livistona palm having ht. 60 cm to 75 cm, well developed with 8 to 10 leaves, fresh & healthy foliage in 30 cm size of Earthen pot/Plastic pot. as per direction of the officer-in-charge. I.No-3.57/DSR-2020(Hort)
20
-
215.25
... More
Providing and displaying of Phoenix palm having ht. 75 cm to 90 cm with 10 to 15 or more leaves, well developed, fresh and healthy in 25 cm size of Earthen pot/Plastic pot & as per direction of the officer-in-charge.I.No-3.74/DSR-2020(Hort)
20
-
215.25
... More
Providing and Displaying Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. in 25 cm size Earthen Pot/ Plastic Pot as per direction of the officer-in-charge.I.No-5.7/DSR-2020(Hort)
100
-
461.25
... More
Providing and Displaying Bismarckia Palm 115 to 180 cm ht., well developed 12 and above good color fresh and healthy leaves in 40 cm Cement Pot as per direction of the officer-in-charge. I.No-5.11/DSR-2020(Hort)
20
-
1937.25
... More
Providing and Displaying Ficus reginold well developed fresh & healthy foliage 60 to 75 cm spread 105 to 120 cm ht., Bushy in 35 cm Cement Pot as per direction of the officer-in-charge I.No-5.25/DSR-2020(Hort)
100
-
377.2
... More
Providing and Displaying Foxtail palm well developed with fresh & healthy foliage of ht. 210 to 240 cm in big 40 cm Cement Pot as per direction of the officer-in-charge. I.No-5.30/DSR-2020(Hort)
20
-
1183.9
... More
Providing and Displaying Furcaira variegated well developed with fresh & healthy foliage 8 to 10 leaves in 30 cm Earthen Pot as per direction of the officer-in-charge I.No-5.31/DSR-2020(Hort)
50
-
225.5
... More
Providing and Displaying Travelers palm well developed with fresh & healthy foliage 120 to 150 cm ht. in 35 cm Cement Pot as per direction of the officer-in-charge. I.No-5.42/DSR-2020(Hort)
20
-
484.85
... More
Providing and stacking of Azadirachta indica ( Neem ) of height 120-130cm in big polybag of size 25 cm as per direction of the officer-in-charge. I.No-7.5/DSR-2020(Hort)
10
-
65
... More
Providing and stacking of Bottle palm of ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags as per direction of the officer-in-charge.Each I.No-7.12/DSR-2020(Hort)
10
-
550
... More
Providing and stacking of Callistemon lanceolatus of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. I.No-7.14/DSR-2020(Hort)
10
-
65
... More
Providing and stacking of Cassia siamea of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge I.No-7.17/DSR-2020(Hort)
10
-
65
... More
Providing and stacking of Dalbergia sissoo (Seasam) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. I.No-7.23/DSR-2020(Hort)
6
-
55
... More
Providing and stacking of Ficus bengalensis (Bargad) of height 120-135 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge.I.No-7.28/DSR-2020(Hort)
4
-
65
... More
Providing and stacking of Nauclea cadamba (Kadam) of height 150-165 cm. in big poly bag of size 25 cm as per direction of the officer-in-charge.I.No-7.60/DSR-2020(Hort)
6
-
65
... More
Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge I.No-7.64/DSR-2020(Hort)
6
-
90
... More
Providing and stacking of Polyalthia longifolia (Ashok) of height 150-165 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge.I.No-7.74/DSR-2020(Hort)
10
-
80
... More
Providing and stacking of Eugenia jambolana (Jamun) of height 150-165 cm. in big poly bags of size 25 cm as per direction of the officer-in-charge. I.No-7.83/DSR-2020(Hort)
10
-
75
... More
Providing and stacking of Washingtonia filifea palm stem ht. 90-105 cm with 6-7 healthy leaves lush green leaves well developed in big size HDPE Bags as per direction of the officer-in-charge.I.No-7.89/DSR-2020(Hort)
10
-
400
... More
Providing and stacking of Ficus reginald well branched, bushy of height 60- 75 cm. in earthen pots of size 25 cm as per direction of the officer-in-charge I.No-8.24/DSR-2020(Hort)
40
-
100
... More
Providing and stacking of Hamelia patens of height 90-105 cm. bushy in big size HDPE bags as per direction of the officer-in-charge. I.No-8.33/DSR-2020(Hort)
40
-
100
... More
Providing and stacking of Allamanda cathartica of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. I.No-9.1/DSR-2020(Hort)
100
-
45
... More
Providing and stacking of Quisqualis indicia of height 30 cm to 45 cm. in
20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. I.No-9.12/DSR-2020(Hort)
100
-
25
... More
Providing and stacking of Vernonia elaegnifolia (curtain creeper) plant of height 30 cm to 45 cm. in 20 cm size of Earthen pots / Plastic pots & as per direction of the officer-in-charge. I.No-9.14/DSR-2020(Hort)
100
-
25
... More
Transplantation of trees with in a distance of 2km including excavation around existing tree, pruning of branches, lifting, loading and transportation of existing tree, digging pits for placing tree at new place, adding manure, sand, fertilizer, hormones and bio fertilizer to it. Levelled and neatly dressed and disposal of surplus materials from old existing and new sites to designated place. Each tree should be firmly secured to the stake so as to prevent excessive movement, flooding with water, treatment of roots, rope and gunny bags as per direction of the officer incharge. T&P and all required materials shall be arranged by the contractor and nothing extra shall be paid on this account.
-
-
-
... More
(a) Girth of tree shall be measured at a height of 1m above ground level.
-
-
-
... More
Girth of trees upto 50cm I.No-12.1.1/DSR-2020(Hort)
4
-
2184
... More
Girth of trees beyond 50cm and upto 90cm. I.No-12.1.2/DSR-2020(Hort)
4
-
3249
... More
Girth of trees beyond 90cm and upto 150cm. I.No-12.1.3/DSR-2020(Hort)
4
-
5721
... More
Girth of trees beyond 150cm. I.No-12.1.4/DSR-2020(Hort)
4
-
12245
... More
Complete Maintenance of the soft landscape area including but not limited to watering the plants, cutting & trimming, replacing worn out/dead plants/ mortality replacement, cleaning of lawn, applying fertilizers, insecticides, pesticides, river sand etc. All the materials including but not limited to tools and tackles, fertilizers, pesticides, insecticides, fungicides, manures/composts, etc. required for the works shall be in the scope pf the contractor Water and Mortality replacement shall be in contractor's scope. Minimum Manpower deployment : 1 head gardeners and 1 gardeners Daily & 1 Supervisor visit minimum twice in a week
12
-
35000
... More
ELECTRICAL WORKS, FIRE FIGHTING, CCTV & SIGNAGE
-
-
-
... More
Supply and burring of Safe Earthing Electrode T-39 (Hot-Dip Galvanized), Length up to 3000mm, outer pipe 76mm inner Dia 38mm terminal Dia 12 mm ,outer GI pipe of 16 SWG and inner GI pipe of 12 SWG with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 X 3 GI. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. CertifiedS.I.No-725D
4
-
12700
... More
Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) I.No-5.9/DSR-2018
40
-
109.49
... More
Providing and fixing 25 mm X 5 mm G.I. strip in 40 mm dia G.I. pipe from earth electrode including connection with G.I. nut, bolt, spring, washer excavation and re-filling etc. as required. I.No-5.11/DSR-2018
40
-
405.42
... More
Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.
-
-
-
... More
3 x 1.5 sq. mm (I.No-1.17.3/DSR-2018)
850
-
45.3
... More
3 x 2.5 sq. mm (I.No-1.17.12/DSR-2018)
785
-
62.97
... More
3 x 4 sq. mm (I.No-1.17.21/DSR-2018)
200
-
97.99
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm (I.No-7.1.1/DSR-2018)
150
-
150.97
... More
Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35 sq. mm (I.No-7.5.1/DSR-2018)
1885
-
25.65
... More
Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 kV grade of following size on wall surface as required Upto 35 sq. mm (clamped with 1mm thick saddle). Upto 35 sq. mm (I.No-7.7.1/DSR-2018)
50
-
32.59
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc..direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required.
-
-
-
... More
63 mm dia (OD-63 mm & ID-51 mm nominal) (I.No-14.16.1/DSR-2018)
650
-
91
... More
90 mm dia (OD-90 mm & ID-76 mm nominal) (I.No-14.16.2/DSR-2018)
775
-
124.75
... More
120 mm dia (OD-120 mm & ID-103 mm nominal) meter (I.No-14.16.3/DSR-2018)
200
-
201.5
... More
Supplying and making end termination of 1.1 KV grade copper/aluminium multicore cables of the following sizes. The work includes sizing the core leads, removing insulation, fixing suitable crimping type aluminium lugs/thimbles by using hydraulic crimping tools with correct size of the dies, shaping the leads and neatly connecting the same to the equipment terminals. 4CX25sq.mm. AL armoured (I.No-9.1.3.4/DSR-2018)
2
-
209.3
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc.25 sq. mm 3-1/2 core (SOR.No-501J/UPPWD-2018)
200
-
373
... More
Fabrication, Supplying Installation testing and commissioning of outdoor type cubical Feeder Pillar of (a) 700mm W X 1000mm H X 400mm deep made out of M.S. Sheet 2mm thick (14 SWG) duly compartmentalized having two sections of 4 strips bus bar, bus bar-A of 125 Amp and Auxiliary bus bar-B of 100 Amp capacity, double door with locking arrangement for protection from rain, dust, duly fixed on M.S. angle iron frame work of size 50 mm x 50 mm x 5 mm 90 cm long legs out of which 45 cm duly grouted in cement concrete 1:2:4 (1 cement : 2 sand : 4 stone, aggregate 20 mm) and having following accessories mounted inside the cubical panel i/c connection, inter connection with aluminium thimbles, earthing with two nos. earth studs duly painted with one coat of red oxide & two coats of superior quality enamel paint complete etc. as required.
-
-
-
... More
Supplying and fixing of following accessories in the existing cubical panel board / feeder pillar including connection testing etc. as required.
-
-
-
... More
INCOMER: 1 No. 63 Amp. 415 Volts 4P MCCB of 25 KA (Ics = Icu = 100%).
-
-
-
... More
METERING: 1 Set of Digital Voltmeter (0-500 V) 96 sq.mm. flush type with selector switch.
-
-
-
... More
1 Set of Digital Ammeter (0-100 A ) 96 sq.mm. flush type with selector switch & 125/5 Amp ratio CTs.
-
-
-
... More
1 Set of 3 Nos. LED phase indication lamps (RYB) with 2 Amp. SP MCB.
-
-
-
... More
BUSBAR
-
-
-
... More
Compartmentalized having two sections of 4 strips bus bar, bus bar of 100 Amp ,
-
-
-
... More
OUTGOINGS (BUS BAR - A)
-
-
-
... More
15 Nos. 40 Amps. DP MCB
-
-
-
... More
1 No. 70 Amp. TP Power contactor (ML-4 )
-
-
-
... More
1 No. Astro Timer, D-21
-
-
-
... More
OTHER ACCESSORIES
-
-
-
... More
1 No. Danger notice plate.
-
-
-
... More
Auto/Manual By Pass arrangement.
-
-
-
... More
FP as described above and as per the drawings (A.R)
1
-
35680
... More
Supply, installation, testing and commissioning of 5W LED Spik light. Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent.
20
-
1427
... More
Supply, installation, testing and commissioning of 20W LED Ground Burial . Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent.
15
-
3598
... More
Supply, installation, testing and commissioning of 9W LED light for tree up light . Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent.
30
-
7100
... More
Supply, installation, testing and commissioning of Led strip light IP 65 (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent.
200
-
331
... More
Supply, installation, testing and commissioning of 24W LED Ceiling Light. Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent.
32
-
2467
... More
Supply, installation, testing and commissioning of 100W LED Flood Light. Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. (color temoreture as per yellow) Make Philips / Havells /Bajaj/Wipro or equivalent.
6
-
3733
... More
Supply, installation, testing and commissioning of 30W LED Light solar panel including 6m pole . Fixture shall have Ingress protection of IP 65 for the optical part and the driver suitable for exterior grade installations. Make Philips / Havells /Bajaj/Wipro or equivalent.
12
-
46000
... More
Supply, installation, testing and commissioning of 4 megapixels resolution Network Bullet camera camera,Imager 1/2.8”SONY 2.43 mega low illumination CMOS,Video Compression. .H.264/MJPEG,Day/Night .Mechanical ICR,Minimum Illumination-0Lux/F1.4(IR ON) IR Illumination-40-50M,,Electronic Shutter-Auto/Manual(1/25~1/10000) Lens 2.8 – 12 mm varifocal lens,Resolution Main-stream:D1/Q1080P(960*540)/HD720P/ HD1080P 1-25/30fps,Digital Noise Reduction-3D,Wide Dynamic Range-Digital WDR Motion Detection -4 Zones, Multi- Level Sensitivity,Privacy Zones-4 Zones,Snapshoot-Support JPEG format,Password Protection-Support,Character Display-Support(Channel /Date).Regulatory Emissions-FCC Part 15 CE: EN55022,Immunity -CE: EN50130-4,IP Rating- IP66 rated enclosure to protect against dust and water damage ONVIF compliant .includung CCTV wire.Make-Tyco/Mobotix/Pelco
4
-
27494
... More
Supply, installation, testing and commissioning of Network Video Recorder , Live view/Resolution 5MP/3MP/1080p/720p,Motion Detection Control Privacy Mask Control. USB interface-1 × USB 2.0 and 1 × USB 3.0,Security-HTTPS, SSL, Watermark, User Authentication, Miscellaneous-N+1 hot spare. Alarm in/out -4 / 1,Network interface-1 RJ-45 10 /100 /1000 Mbps self-adaptive Ethernet interface, Security-HTTPS, SSL,Video/Audio output-VAG,HDMI and Audio. Watermark, User Authentication,Incoming bandwidth-100Mbps,Outgoing bandwidth-80Mbps,HDMI output,VGA Output,Protocol-IPv4, IPv6, TCP/IP protocol, PPPoE, DHCP, DNS, DDNS, NTP, SADP, SMTP, SNMP, NFS, and iSCSI are supported.TCP, UDP and RTP for unicast, UPnPTM, ONVIF, PSIA,Support 32 IP Camera, 2 SATA interfaces for 4 HDDs Upto 4TB for each disk. Make-Tyco/Mobotix/Pelco
1
-
58657
... More
Supplied mounted and commissioned complete LED diode enabled 3D type acrylic letters size 600 x 450 with waterproof casing and resistant to extreme weather conditions "WELCOME TO SAHARANPUR" towards south facing facade & "THANKS FOR VISITING" on north facing facade. Mounted on box type blended ACP and metal support as per design size 11500 x 1000 fixed to size and aligned as per site following instructions of site engineer.
2
-
388850
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements