Rural Engineering Department Tender

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Cluse 1501.2.2 M30(Grade) (1:1½:3) coarse and fine aggregates conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips primer, sealant, admixtures as approved, curing concrete slabs for 14 days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical specification

Class-150 Brick Work in 1:4 (Cement and Coarse sand ) mortar in foundation and plinth including supply of all materials, labour and T&P etc. required for proper completion of the work as per S.I No 305

Supply and Fixing of Informatory Sign Board including Painting & Lettering etc. as per given specification complete work at site.

P/Laying C.C. in 1:2:4 ( One Part Cement, 2 Part of Coarse Sand and 4 part of approved 20mm grade stone grit) including supply of all materials, labour and T&P etc. required for proper completion of the work as per S.I No 279(a).

12mm thick Cement plaster in 1:4 (1 cement : 4 Coarse Sand) mortar over brick work with finished even and smooth.including supply of all materials, labour and T&P etc. required for proper completion of the work as per SI No.584

Supply of 80mm thick I shaped mechanically compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete paver blocks shall not be less than30 MPa & by weight 4.5 Kg/no. Including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-In-Charge

Providing and laying cement concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40mm nominal size) and curing complete, including cost of form work. In Foundation as per S.I.No.273

Mild steel or iron work in plain work such as reinforced concrete or reinforced brick work (When not included in and an over all rates) brought to required shape as necessary including bending for proper completion of the work and including the supply of steel and its wastage Bend, hooks and authorized over lapping shall be measured as per S.I.No.504