Rural Engineering Department Tender
... More
The Rural Engineering Department has issued a formal invitation for competitive bids for Pandeypur Ward Mein State Bank Colony Mein Sadak Nirmaan Va Patari Ke Dono Taraph Kc Drain Va Interlocking Ka Kaary. in Jaunpur, Uttar Pradesh, with an estimated contract value of Rs. 35,76,000. The bid opening date for this tender is 12-11-2026 and the last date for bid submission is 18-11-2026. Interested bidders for Rural Engineering Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Rural Engineering Department Tender - UP Tender
Opening Date12 Nov 2026
Closing Soon18 Nov 2026
Tender Amount₹ 35,76,000
Costs
EMD
₹ 72,000Document Cost
₹ 2,714Tender Fee
Refer Documents
Description
Pandeypur Ward Mein State Bank Colony Mein Sadak Nirmaan Va Patari Ke Dono Taraph Kc Drain Va Interlocking Ka Kaary.
Contact
Tender Id
2026_REDUP_1207981_3Tender No
1409/SE/date 31-10-2026Tender Authority
Rural Engineering Department ViewPurchaser Address
-Website
http://upred.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Scraping old painted surface deposal of all scrapped material as spoil banks within 30m (100') distance as directed by the E/I.
850.5
29
25047.22
... More
Cement concrente with cement, approved coarse sand and 40 mm brick ballast, in propotion 1:6:12including supply of all material, labour, T&P etc required for proper completion of work as per SI NO .273
0.83
3857
3201.31
... More
Class -150 Sub class' A' brick work in 1:4 with cement and approved fine sand of 1.25 F.M. mortor in foundation and upto plinth including supply of all materials, labour and T&P etc compelte as per SI NO .305
6.71
5177
34741.03
... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. (Grading-1 Material)
171.95
2067
355487.71
... More
Providing , laying spreading and compacting stone Agrigates of specific sizes to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling ,with three wheel 80-100 kn static Rollar in stage of proper grade and camber , applying and brooming stone screening /binding material to fill up the interstices of coarse aggrigates ,watring and compacting to the required density Grading -3 as per Technical Sprcification clause 405. By Manual Means
10.13
3030
30702.81
... More
Providing and laying dense graded bituminous macadam with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 505 complete in all respects.
67.5
9354
631409.85
... More
Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects
40.5
11159
451939.91
... More
Providing and Laying of Rubber moulded (Grey colour) Interlocking Concrete Block Pavements having thickness 80 mm including level and slope bend,filling joint with local sand on bed,filling as per drawings and Technical Specification Clause 1504.
553
793
438667.25
... More
Providing and Laying of Rubber moulded (Red colour ) Interlocking Concrete Block Pavements having thickness 80 mm including level and slope bend,filling joint with local sand on bed,filling as per drawings and Technical Specification Clause 1504.
553
859
475441.75
... More
Cement concrete with 20 mm. Gauage approved stone ballast, approve coarse sand and cement in the porportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work. S.I. No-279 (b)
0.69
6745
4654.05
... More
12mm thick plaster in wall in/out side in 1: 4 in cement f/sand mortar work SI 584
31.91
156
5001.89
... More
Construction of pre cast KC Drain with pre cast CC block size 325x300x125mm laid in flat position (size 325x400x120mm) curve stone (325mm in length )and i/c the cast of base conc 7.5cm thick in 1:6:12 cement sand and 40mm b/ballast i/c all etc complete.
720
1090
785232
... More
Providing and laying of hot applied thermoplastic compound 2.5mm thick including reflectorising glass beads @250gms.per sqm.area same as per MORT&H spece- 8.13.803.
72
587
42271.2
... More
Finising walls( two coat) with plastic Emulsion paint of frist quality approved brand and manufacture on undecorated wall surface to give and even shade including throughly brushing the surface free frome morter dropping and other forgen matter and sand prepered smooth . I/C supply of all material labour T&P etc. required for proper complition to the work .(for kc drain wall) S.I. No-N.B.O.18.57 ch.15
360
89
32320.8
... More
Supply and fixing of FSRC precost Rcc Medium duty man hole cover with fram of size(600x600x75mm) rate aproved by SE RED VNS
18
2850
51300
... More
Supply and fixing of FSRC precost Rcc Medium duty man hole cover with fram of size(300x300x50mm) rate aproved by SE RED VNS
20
1425
28500
... More
Supply and fixing of PVC pipe 110 mm dia ISI mark for drainage SI no.23(31) SOR 2020 p.no. 10 Rate=225x1.1=247.50
26
235
6113.38
... More
Supply and informatory M.S. sign Board size 1.2x0.90meter made of 18mm gauge M.S sheet fic ISA 40x40x6mm from support in back side by 40x5mm flat iron on all four side along with to vertical post of 2.90mtr Diagonal bracing of size 40x5mm flat iron electrically welded and painted with one coat red oxide primer and 2coat superier quality enamel paint with lettering work of required specified information also L/c fixing in trech both side C.C 1:2:4 size 0.45x0.45x0.50m Required for proper complation of work reference specification S.I No. 502
2
6175
12350

