Rural Engineering Department Tender

... More
The RED has issued a formal invitation for competitive bids for the Rural Engineering Department project, for Gram Sabha Khushipur Me Sant Ravidas/dr Br Ambedarkar Ji Park Ka Sundrarikaran V Murti Sthapana Ka Karya in Varanasi, Uttar Pradesh, with an estimated contract value of Rs. 8,47,000. The bid opening date for this tender is 05-11-2026 and the last date for bid submission is 20-11-2026. Interested bidders for Rural Engineering Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Rural Engineering Department - RED Tender - UP Tender

Opening Date5 Nov 2026
Closing Soon20 Nov 2026
Tender Amount₹ 8,47,000 
Notes
Download

Costs

Description

Gram Sabha Khushipur Me Sant Ravidas/dr Br Ambedarkar Ji Park Ka Sundrarikaran V Murti Sthapana Ka Karya

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.As per Dsr 2023 code 2.27

0.18

1482

266.92

... More
Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-Ill) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). i/c as per Dsr 2023 code 5.3

2.002

8033

16083.5

... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) I/c as per Dsr 2023 code 5.1.2

1.536

6316

9701.68

... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement : 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) I/c as per Dsr 2023 code 5.2.2

2.022

7578

15322.86

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)i/c as per Dsr 2023 code 6.1.2

0.096

4980

478.09

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo-Mechanically Treated bars of grade Fe-500D or more. I/c as per Dsr 2023 code 5.22.6

5.456

7530

41087.1

... More
Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns, etc. for mass concrete I/c as per dsr 2023 code 5.9.1

18.76

273

5136.84

... More
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform I/c as per dsr 2023 code 5.9.3

8.064

647

5221.05

... More
Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers I/c as per dsr 2023 code 5.9.5

8.64

514

4442.61

... More
Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts I/c as per dsr 2023 code 5.9.6

11.304

671

7587.56

... More
E/w in cutting or embankment in o/s excavation to be the form of regural pits not exceeding 1/2meter(20") in depth and ew in embankment to be in 20cm layer including ramming and dressing the surface to required levels and slopes and also including 1.50m lift and 30m lead the earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m distance as directed by E/I I/c as per S.I no 253 including cartage upto 3.00km

61.95

229

14242.31

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in :Cement mortar 1:6 (1 cement : 6 coarse sand)i/c as per Dsr 2023 code 6.4.2

0.844

6358

5366.35

... More
12 mm cement plaster of mix ::1:6 (1 cement: 6 fine sand) I/c as per Dsr2023 code 13.1.2

172.2

232

40081.62

... More
15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand) i/c as per Dsr 2023 code 13.2.2

172.2

267

46051.45

... More
Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections. I/C as per DSr 2023 code 5.30

9.6

54

525.53

... More
Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with : Makrana white second quality I/C as per DSr 2023 code 11.23.1

11.52

2609

30063.44

... More
6mm thick plaster of mix 1:3 with cement and fine sand I/c as per Dsr2023 code 13.16.1

11.52

209

2416.77

... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates efc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). I/c as per dsr 2023 code no 10.28

43.2

539

23298.97

... More
Providing coat and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One of with less self-priming of elastomeric waterproofing liquid (dilution water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer- in-Charge. I/c as per dsr 2023 code 22.22A

5.76

393

2264.75

... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre I/c as per dsr 2023 code 13.41.1

22.104

129

2865.34

... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 Itr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm)I/c as per dsr 2023 code 13.47.1

344.4

119

41145.81

... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.I/c as per dsr 2023 code 13.80

366.504

108

39935.01

... More
Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm dia I/c as per dsr 2023 code 12.41.2

8.7

263

2292.62

... More
Construction of granular sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401.

22.42

1821

40834.87

... More
E/w in excavation in foundation in o/s including lift upto 1.50m and lead upto 30m and including filling watering and ramming of excavated earth into space between the building and sides of foundation trenches or into plingth and removal and disposal of suplus earth as directed by engineer in charge upto a distance of 30 m from the foundation trenches I/c T&P as per S.I no 251

11.405

123

1408.52

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:4:8 (1 Cement : 4 coarse sand (zone-Ill) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) as per DSR 2023 code 4.1.8

0.468

4756

2226.03

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand) I/c as per dsr 2023 code 6.1.1

8.142

5146

41903.26

... More
Providing and laying of interlocking concreat block pavements having thickness 80mm including leveling and dressing of surface to required level and slope ,spreading and moisting 30 mm thick locak sand on bed , filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504 as per mord specification no 1504. 50% RED BASE

89.68

859

77102.38

... More
Providing and laying of interlocking concreat block pavements having thickness 80mm including leveling and dressing of surface to required level and slope ,spreading and moisting 30 mm thick locak sand on bed , filling joints with local sand etc for proper completion of the work as per drawing and technical specification clause 1504 as per mord specification no 1504. 50% GREY BASE

89.68

793

71138.66

... More
P&F 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby redArea of slab over 0.50 sqm I/c as per dsr 2023 code 8.2.2.2

14.4

3586

51644.46

... More
Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Marble work as dsr2023 code 8.3.1

25.2

208

5254.12

... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:6 (1 cement : 6 coarse sand)i/c as per Dsr 2023 code 6.1.2

1.62

4980

8067.75

... More
Concrete with 20 mm gauge approved stone grite approved coarse sand and cement in the proportion of 4:2:1 i/c supply of all materials, labour & T & P etc. required for completion of work. SI No. 279(B).

0.679

6745

4579.85

... More
Supply of Pre cast rcc three seater garden bench with M-15 concrete (size 1500*600*450mm) I/c M.R

6

6745

40470

... More
Supply of informatory M.s sign board size 1.20*0.90 m made of 0.80mm M.s sheet fixed in ISA 40*40*5mm,frame supported in back side by 32*5mm flat iron on all four side along with two vertical post of 2.90m from bottom of frame of angle iron ISA 40*40*5mm with 0.25m long horizontal leg electrically welded and painted with one coat synthetic enamel paint I/c

2

6175

12350



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.