Rural Engineering Department Tender

Providing and Laying R.C.C. in M-30 grade excluding cost of reinforcement but including supply of all materials, labour and T&P etc. required for proper completion of the work as per S.I No New (ii)specification No.5.34.1

Supply and Fixing of Informatory Sign Board including Painting & Lettering etc. as per given specification complete work at site.

Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade cement or any other type as per Cluse 1501.2.2 M30(Grade) (1:1½:3) coarse and fine aggregates conforming to IS 383 maximum size of coarse aggregate not exceeding 25mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips primer, sealant, admixtures as approved, curing concrete slabs for 14 days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical specification

Excavation in foundation in ordinary soil (Loam, Clay or Sand) Including lift upto 1.50 m and lead upto 30m and including filling watering and ramming of excavated earth and removal and disposal of surplus earth as directed by the Engineer In-charge upto a distance of 30m as per SI No 251

Providing and laying cement concrete in 1:6:12 (1 cement : 6 fine sand : 12 graded stone aggregate 40mm nominal size) and curing complete, including cost of form work. In Foundation as per S.I.No.273

Supply of 80mm thick I shaped mechanically compressed inter locking cement concrete pavers block manufactured by high pressure & controlled vibration machine having plan dimension 200x(160+120mm) with minimum 5mm thick topping of O.P. cement mixed with 25% marble powder. The compressive strength of concrete paver blocks shall not be less than30 MPa & by weight 4.5 Kg/no. Including cost of all material, labour, T&P etc. required for proper completion of work as directed by Engineer-In-Charge

P/Laying C.C. in 1:2:4 ( One Part Cement, 2 Part of Coarse Sand and 4 part of approved 20mm grade stone grit) including supply of all materials, labour and T&P etc. required for proper completion of the work as per S.I No 279(a).

Providing, Laying, Spreading and Compacting stone aggregates of specific sizes 22.4-53mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical specification Clause 405.