Rural Engineering Department Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Rural Engineering Department Tender
Civil And Construction
Building Construction
Eprocure
Opening Date24 Apr 2025
Closing Date8 May 2025
Tender Amount₹ 29,50,00,000
Technical
Technical
Additional Eligibility
Class Of Bidder
... View More
Class A
Bid Capacity
... View More
The formula for bid capacity is: Assessed Available Bid capacity = (A*N*M - B) Where A = Maximum value of Turn Over in any one year during the last five years as certified by Chartered Accountant (updated to the price level of the last year at the rate of 8 per cent a year) taking into account the completed as well as works in progress in which there should be at least 50% Civil Engineering works. N = Number of years prescribed for completion of the works for which bids are invited (period up to 6 months to be taken as half-year and more than 6 months as one year). M = 2.5 B = Value, at the current price level, of existing commitments and on-going works to be completed during the period of completion of the works for which bids are invited. Alternatively, the formula can also be expressed as: Bidding Capacity (Rs.) = {[AxNx2]-B} Where, A= Maximum turnover in construction works executed in any one year during the last five years taking into account the completed as well as works in progress. The value of completed works shall be brought to current costing level by enhancing at a simple rate of 10% per annum. N= Number of years prescribed for completion of work for which bid has been invited. B= Value of existing commitments and ongoing works to be completed during the period of completion of work for which bid has been invited.
Technical Capacity
... View More
The required prior work experience for the bidder is defined as "Similar work in nature and size". The specifics of this experience are as follows:
- Up to 4 storied building: no binding of story completion.
- 5 to 10 storied building: minimum 1 building of 5 storey completed.
- 11 to 15 storied building: minimum 1 building of 8 storey completed.
- More than 15 storied building: minimum 1 building of 10 storey completed.
Each basement, Stilt constructed in the building shall be considered as a storey. Mumty and machine room will not be counted as a storey / height for this purpose. The bidder should have satisfactorily completed as a prime contractor at least one similar work of value equal to one-third of the bid value, excluding maintenance cost. No specific percentage of similar works completed is mentioned, but the bidder should have completed at least one similar work of value equal to one-third of the bid value. The bidder's annual financial turnover should be at least 100% of the estimated value of the work, with at least 50% of the turnover being from civil engineering construction works in each of the last five financial years. A percentage of Ten is mentioned, but the exact amount is not specified. The percentage to apply to the value of the work not completed representing the Employer's additional cost for completing the Works is Twenty Percent (20%).
Costs
EMD
₹ 59,00,000Document Cost
₹ 2,354Tender Fee
Refer Documents
Summary
Commissionrate Agra K Chhipitola Rakabganj Police Club Colony
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_REDUP_1032010_1Bid Award Id
ViewTender No
13/NIVIDA AGRA/2025-26 dt 15.04.2025Tender Authority
Rural Engineering Department ViewPurchaser Address
-Website
http://http://upred.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 6 way Double door (4 + 18)
(Make- Havells/Philips/Legrand or equivalent)
2
3924
7848.98
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 65 mm dia
2
5063
10127.6
... More
Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer and of required shade and colour all complete to achieve even shade and colour : New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content
less than 50 gram/litre (Make Royal Paints
Asian Paints, Berger Paints India Ltd, etc.)
35007.04
141
4955246.51
... More
Providing and fixing MV danger notice plate of 200 mm x 150 mm made of mild steel at least 2mm thick & vitreous enamelled white on both sides and with inscription in signal red colour on front side as required.
2
212
424.48
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame
of required shape and approved quality H D - 20 Circular shape 560 mm internal diameter
4
1277
5110.72
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 32 mm dia nominal bore
115
508
58485.55
... More
Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required W.C. pan with ISI marked white solid plastic seat and lid
192
6104
1172131.2
... More
Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer (Make Kohler, Roca, Jaquar, Parryware, Hindware etc.)
192
3019
579807.36
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. DSR 11.27
359.94
1795
646236.28
... More
Supply and fixing of C02 type fire extinguisher 4.5 kg. capacity (ISI Marked IS : 2878 & TAC approved) complete with initial charge and wall bracket, along with supply of all materials and labour for proper completion
of work
30
11980
359400
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore
6
474
2847.42
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 250 mm. dia. RCC Pipes
50
775
38768
... More
Supply and fixing of fire extinguisher, ABC Type 4.00
kg. capacity (ISI Marked IS : 15683 & TAC approved)
complete with initial charge and wall bracket, along with
supply of all materials and labour for proper completion
of work.
30
7860
235800
... More
Supplying, installation, testing & commissioning of manual call boxes of MS construction in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required.
26
373
9723.74
... More
Providing and fixing factory made ISI marked steel glazed doors, windows and ventilators, side /top /centre hung, with beading and all members such as F7D,F4B, K11 B and K12 B etc. complete of standard rolled steel sections, joints mitred and flash butt welded and sash bars tenoned and riveted, including providing and fixing of hinges, pivots, including priming coat of approved steel primer, but excluding the cost of other fittings, complete all as per approved design, (sectional weight of only steel members shall be measured for payment). Fixing with 15x3 mm lugs 10 cm long embedded in cement concrete block 15x10x10 cm of C.C. 1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)( Z section windows) (by weight) DSR 10.11.1
12701.7
99
1269153.86
... More
Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110 mm
2
283
566.22
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 16 sq.mm. + 1 x 6 sq.mm. earth wire (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
30
609
18273.3
... More
Supply & fixing of 200 mm. dia Socket
22
800
17600
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 80 mm dia
4
3930
15723.2
... More
62 mm thick cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) and top layer 12mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate, 6mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture’s specifications. This includes cost of cement slurry, but excluding the cost of nosing of steps etc. complete. DSR-11.5 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
911.8
805
734263.42
... More
Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
52
1232
64085.84
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Coupler 110mm.(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
242
220
53240
... More
Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 90 mm dia (OD-90 mm & ID-76 mm nominal)
50
228
11440.5
... More
Constructing brick masonry road gully chamber 50x45x60 cm with bricks of class designation 75 in cement mortar 1:4 (1 cement : 4 coarse sand) including 500x450 mm pre-cast R.C.C. horizontal grating with frame complete as per standard design:- With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
8
4542
36342.08
... More
Supplying, installation, testing and commissioning of diesel engine driven main fire pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Diesel Driven Pump) Horizontal type, multistage, centrifugal pump of cast of iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS 1520. Suitable HP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant IS standard complete with auto starting mechanism, 12 /24 volts electric starting equipment, diesel tank, exhaust pipe extended upto 10 m outside pump house duly insulated with 50 mm thick glass wool with 1.0 mm thick aluminium sheet cladding, residential silencer, instruments and protection as per standard specification, stop solenoid for auto stop in the event of fault with audio indications, painted with post office red colour etc. as required M.S fabricated, common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads 2280 lpm at 88 m Head.
2
501732
1003464.4
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Coupler 50mm .(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
2
60
120
... More
Providing and fixing 25 mm X 5 mm G.I. strip on surface or in recess for connections etc. as required.
530
192
102035.6
... More
Providing and fixing square-mouth S.W. gully trap SP-1 complete with C.I. grating, brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design 150 x 100 mm size P type With common burnt clay FPS (non modular) bricks of class designation 75
16
2084
33356.16
... More
Providing and fixing 600 x 450mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete in all respect.
192
1226
235395.84
... More
Supply & laying of 350 mm. dia housing pipe (8 mm. thick)
100
3000
300000
... More
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. DSR-5.33.2.1+5.38 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
1222.24
7789
9520638.48
... More
Cutting holes up to 30x30 cm in walls including making good the same: With With common burnt clay F.P.S. (non modular) bricks
190
317
60382
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall / Terrace 15 mm dia nominal bore (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
385
218
84191.8
... More
Providing & fixing C.I. tee at the inlet & outlet of septic tank.
4
473
1894
... More
Providing & applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with apiece of cloth lightly soaked in kerosene oil.
3.4
111
378.9
... More
Supply and fixing of single unit LED aviation
obstruction light complete with transformer and LED
spiral etc complete in all respect. CAT AAA
4
3945
15780
... More
Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/m2) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). DSR-9.137 (Make JC FIRE DOOR, Metaflex Doors India, Godrej Security Solutions, Navair International, Promat India etc.)
70.56
5743
405288.88
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 50mm dia nominal bore
10
782
7828
... More
Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms
192
513
98582.4
... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 25 mm dia nominal bore
190
122
23280.7
... More
S/F of aluminium conductor PVC insulated armoured, served, sheathed cable 1100 volts grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by E/I complete in all respects The armoring of the cable shall be properly connected with the earth conductor by clamps etc.16 sqmm x 4 core (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
80
343
27440
... More
Providing & fixing storage type electric hot water heater 25 Litre made out of heavy gauge steel jacket finished with rust proof baked-on glossy white enamel paint, inside glass lined heavy gauge copper tank, 25 mm thick polyurethane foam insulation, thermostatically controlled immersion heater with pilot neon lamp, replaceable magnesium anode bar, suitable for 8.0 bar maximum working pressure, cold water inlet and hot water outlet pipe, suitable length of electrical cable and 15 amp 3 pin plug top, complete in all respect including testing etc. (Horizontal/Vertical) .
(Make- Havells/Bajaj/Crompton or equivalent)
96
10182
977472
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 x 10 sq.mm. + 2 x 6 sq.mm. earth wire
(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
1300
792
1030835
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor complete as required. (For vertical run)
585
155
90926.55
... More
Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws :35 mm thick shutters Sheesham wood D.S.R.-9.27.1.1.3
977.76
3335
3261650.92
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Elbow (45°) 40mm . (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
220
45
9900
... More
Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding. (by weight) DSR 9.48.1 (Tata Steel, SAIL, Jindal Steel, Bhushan Steel, and Essar Steel, etc.)
9816.75
167
1639986.26
... More
Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required.
10
408
4087
... More
40 mm dia G.I Pipe Medium class
210
302
63525
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 20 mm dia nominal bore
45
11
495.9
... More
Supplying, installation, testing and commissioning of electric driven Main Fire Pump suitable for automatic operation and consisting of following, complete in all respects, as required: Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confirming to IS : 1520. Suitable HP Squirrel cage induction motor, TEFC, synchronous speed 1500 RPM, suitable for operation on 415 volts, 3 phase 50 Hz, AC supply with IP 55 protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS-325 M.S. fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered with anti vibration pads. 2280 lpm at 88 m Head.
2
318366
636732.46
... More
Supply & laying of 200 mm. dia blind pipe (8 mm. thick)
60
2500
150000
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 16A DP MCB Double pole (Make- Havells/Philips/Legrand or equivalent)
4
517
2070.32
... More
Providing, fixing, jointing and testing, uPVC SWR pipes, - type B conforming to IS : 13592 to wall, ceiling and floor, approved quality, complete, for soil, waste & rain water drain including pushfit jointing with seal ring. (i) Single socketed pipes. 110 mm dia..(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
2250
715
1608750
... More
Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III): 4 graded stone aggregate 12.5mm nominal size) D.S.R.-4.10 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
143.46
313
44940.28
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 150 mm dia
40
571
22849.6
... More
Supplying and fixing air vessel made of 250 mm dia, 8 mm thick MS sheet, 1200 mm in height with air release valve on top and flanged connection to riser, drain arrangement with 25 mm dia gun metal wheel valve with required accessories, pressure gauge and paintingwith synthetic enamel paint of approved shade as required.
2
14394
28789.04
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 100 mm dia
4
5257
21031.6
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . T fitting 40mm .(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
240
70
16800
... More
13 Passenger Lift/ 884Kgs / 1.25 Speed / 13 Floors / 13
Stops / Stainless Steel Car Cabin BELOW TECHNICAL SPECIFICATION
I PRODUCT DETAILS Product Nam - SUKRANTI (Make-Johnson Lift)
Lift Type- Passenger Lift, Rated Capacity Persons / Kgs / Class of- Loading-13 Person/884 Kgs/P-Passengers, Rated Speed m/s -1.25, Number of stops / openings -13/13, Floor Designation -S+12, Access Sides Inline/Thru Type-1 in front only, Floor Display Character (Entrance Position) G(F),1(F),2(F),3(F),4(F),5(F),6(F),7(F),8(F),9(F),10(F),11(F),12(F)
II MACHINE AND CONTROLLER DETAILS Machine Location / Type-Machine Roomless- Gearless Drive System-Micro Processor Based VVVF, Control system- Micro Processor Based Simples Selective Collective Control with/Without Attendent,
Main Power Supply-AC 3Phase, 50 Hz, 415 Volts + 10% Light Power Supply-220 Volts 50Hz LNE III SHAFT DETAILS Shaft Type-RCCRB Reinforced Cement Concrete with Red Brick
Shaft Width mm X Shaft Depth mm-2000x2600 Overhead mm-4500 Pit Depth mm -1600
Travel Height (in Meters) -41.50
Pit Ladder -Yes
IV CABIN DETAILS A) SIZES Car Width mm X Car Depth mm-1100x2000 Car Clear Height mm -2200
Car Door Type Center/Side-Power Operated Centre Opening Sliding Door
No Of Door Panels-2 Panel Type of Door Drive -Linear Door Drive System
Car Door (W X H) mm-900x2000
B) FINISHES - *SUBJECT TO AVAILABILITY
Design Of Lift Cabin* -Stainless Steel
Lift Cabin Finish* -Hairline Finish
Ceiling Type - Sleek Small Circular -JLFC 08
Ceiling Light-Led Lights
Fan -Cross Flow- Fan
Handrail Type -Ss Round Handrail Handrail Location-Rear Side
Car Door Sill -Aluminium
Extra Allowance for Cabin Interior (Kgs)-88.4 V LANDING DOORS DETAILS A) SIZES Door Size (W x H) mm -900x200
VI SIGNALIZATION / FIXTURES DETAILS A) CABIN OPERATING PANEL Car Operating Panel Type -Full Car Operatin Panel JLCP02
Number of Car Operating Panel -1
COP Faceplate Finish -Stainless Steel-Hairless Finish
Button Model -1s4-bas128(Round)
Car Display - Orange Squair Dot-Matrix Scrolling Display-Vertical
Car Display Location - Car Operating panel
Call Register Signal -Yes
Floor Annunciator -Yes
B) LANDINGS INDICATORS
Landing Display -1-13-OSDM-V
Landing Display Location-1-13-LOP
Call Register Signal -Yes
Stainless Steel Braille Button-Yes
VII SAFETY DETAILS Over Speed Governor- Yes
Door Protection - Infra Red Door Screen
Counterweight Screen - Inbuilt
Over Load Indicator -Yes
Fireman Switch -Yes
Automatic Rescue Device -Yes
Battery Operated Emg Alarm Light - Yes
Two Way Intercom with Press & Speak in COP-Yes
4
2108474
8433898.32
... More
Drilling of 675 mm. dia by rotary machine
240
1500
360000
... More
Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 20 mm cement plaster Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
230.16
447
103049.54
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 200 mm. dia. RCC Pipes
160
666
106563.2
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 80 mm dia
110
1487
163599.7
... More
Supply, Installation, Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374- 2019), THD less than 10%, remote or electronic regulator unit for speed control and all remaining accessories including safety pin,nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230 V, 50 Hz, single phase AC Supply, earthing etc. complete as required.
(Make- Havells/Bajaj/Crompton or equivalent)
384
2153
827124.48
... More
Supply & Filling of pee gravel 2 mm. 4 mm. in side of bore after lower and development as required as per direction of E/I.
60
3600
216000
... More
Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes (DSR 10.30.1)
524.67
811
425911.37
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 2 Way 5/6 amps switch (Make- Havells/Philips/Legrand or equivalent)
56
116
6539.12
... More
Fire Suppression System - CQRS Direct
Tube Based Fire Suppression System - CQRS Direct - Low Pressure HCFC 123 - 4KG Panel described as above and with two years AMC & Comprihensive warranty
4
97520
390080
... More
Reinforced cement concrete work in beams, suspended floors, roofs
having slope up to 15° landings, balconies, shelves, chaijjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-lll) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
13.24
8772
116150.15
... More
Providing and fixing in position precast RCC manhole cover and frame of required shape and approved quality. M.D. -10- Circular shape 500mm internal diameter
12
894
10728.96
... More
Supply and wiring of 3 number 25 sq.mm. PVC
insulated 1100V grade single core Copper conductor
cable in 50 mm dia heavy guage rigid steel conduit partly
concealed in wall and partly laid in slab along with
reinforcement before concreting, with two number 16sq
mm single core Copper conductor calbe as earth
continuity wire drawn in coudit including matching
colour wash etc, complete in all respect. (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
336
824
276864
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 50mm dia..
12
1595
19140
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15 mm dia nominal bore
75
245
18422.25
... More
Providing & fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. 150 mm dia
6
19611
117671.04
... More
Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : 15 mm nominal bore (Make Kohler, Roca, Jaquar, Parryware, Hindware etc.)
192
386
74192.64
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks.25mm dia.
8
1290
10320
... More
S/F of shock treatment chart (prescribed under I.E.rules) duly framed with glass and supported from back with hard board or soft board with supply of all material labour T & P for proper completion of work.
2
305
610
... More
Supply of 7.5 HP KSB make submersible pump set model BPD 302/4+UAMI 150/6/22-203 (S/D) suitable for tube well capable of pumping clear and cold water free from chemical and directly coupled with KSB electric moter operating of 415 volt suitable for 3 phase 50 cycle A.C. Supply of following duty condition 7.5 HP 6 stage pipe.
A - Discharge of water in LPM 860 Approx size of discharge outlet in 80 mm.
B - Total Head of pump set 45 m.
2
63000
126000
... More
SITC of H.T. VCB (11KV) 11 KV HT VCB FOUR BREAKER PANEL BOARD (INDOOR TYPE) (1 INCOMMING + 3 OUTGOING)Providing, testing and commissioning of 11 KV, 630 Amp., 18.40 KA Outdoor compact switchgear as per following
details - Supply of 4 Way 11 KV , 3 Phase, 50 Hz, 3 wire ,
earthed neutral, outdoor type floor mounted, non extensible,
having hinged arc proof cable doors, breaking capacity 18.4 KA,
VCB Ring Main Unit enclosed in robotically laser welded
stainless steel tank having IP67 degree of protection consisting
of following:- (i) 1 Nos. 630 Amps Fault making load breaking
spring assisted SF6 Ring Switches, fitted with fixed type voltage
indicator device as per IEC 61958 along with associated sensor
and fault passage indicator at incoming. (ii) 3 Nos. 630 Amps tee
off spring assisted type vacuum circuit breaker unit with self
powered series trip microprocessor based numerical over current
and Earth fault relay for protection, fitted with fixed type voltage
indicator device as per IEC 61958 and ring core type protection
Current transformer along with LV compartment with Ammeter
with selector switches at Outgoing. (Make : ABB / Schneider /
Siemens).and with two years AMC & Comprihensive warranty
Design, manufacturing, testing at works, supply of HT Panel as per specification and comprising of the following :-
INCOMER-
a) Incomming - 1 No, 630 Amp, VCB.
b) 1 No.- 11 KV / 110 Volt PT class 0.5 accuracy and 100 VA burden with 1 No. voltmeter (0-12 KV), digital type, selector switch for voltmeter and protection MCB for HT Metering up to 12 KV on incommer.
c) 1 No.- (0 - 120 A) dual scale Ammeter, digital type, selector switch for ammeters.
d) 1 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.
e) 1 No - set of dual core dual ratio 3 CTs 100-200/5A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.
f) 1 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories. g) 1 No. hooter with hooter acceptance and reset push button.
h) 1 No - Red, Yellow & Blue for phase indication.
i) 1 No - Amber for Trip indication.
j) 1 No - Red `ON' Green `OFF'indication.
k) 1 No - Spring charge indication.
l) 1 No - Auto trip indication.
m) 1 No. hooter with hooter acceptance and reset push button.
n) 1 No. master trip relay. ( Electromechanical Type ) o) 1 No.Trip ckt supervision relay. (Electromechanical Type ) OUTGOING-
a) Outgoing - 2 No, 630 Amp, VCB.
b) 3 No.- (0 - 50 Amp) dual scale Ammeter, digital type, selector switch for ammeters.
c) 3 No - Microprocessor based numericak relay with O/C, E/F and S/C protection.
d) 3 No - set of dual core dual ratio 3 CTs 100/5 A of 15 VA burden and accuracy class 0.5 for metering and class 5P10 for protection.
e) 3 No. electronic type digital energy analyser having 30 days memory and parameters of KW, KWH, Power factor, frequency etc. Suitable for BMS compatible with all accessories. f) 3 No. hooter with hooter acceptance and reset push button.
g) 3 No - Red, Yellow & Blue for phase indication.
h) 3 No - Amber for Trip indication.
i) 3 No - Red `ON' Green `OFF'indication.
j) 3 No - Spring charge indication.
k) 3 No - Auto trip indication.
l) 3 No. hooter with hooter acceptance and reset push button.
m) 3 No. master trip relay. ( Electromechanical Type ) n) 3 No.Trip ckt supervision relay. (Electromechanical Type ) o) 3 No.auxiliary relay for transformer fault.
p) Power pack.
HT Panel switchboard complete with all interconnections, labels, wiring etc, complete as described above in item nos.A and B and as per specifications. and with two years AMC & Comprihensive warranty
1
1350000
1350000
... More
Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : Kitchen sink with drain board 610x460 mm bowl depth 200 mm
96
2953
283553.28
... More
Supply & fixing of 350x200 mm. dia reducer.
2
5500
11000
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Clean Out Plug 110mm .(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
4
200
800
... More
Supply of 250mm size PVC exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x1.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. Make : Hevells (Modle Trill air DX)
288
1845
531360
... More
Add for Invertor Wiring in wiring Point for light/ Fan/ Plug
with 1.5 mm Cu Wire (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
490
132
64680
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32 mm dia nominal bore
20
411
8239.4
... More
Open timbering in trenches including shuttering and shoring complete. (Measurement to be taken of the face area timbered) Depth not exceeding 1.5 meter
950
54
52193
... More
Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable Gl box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
3333
1157
3857814.18
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1cement :1fine sand) including testing of joints etc. complete : 200 mm diameter RCC Pipes
160
739
118379.2
... More
Providing and fixing MS steel handles with screws etc. complete (a) 125 mm DSR -9.66.1
2708
30
82485.68
... More
Providing and fixing on wall face unplasticised-Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10mm gap for thermal expansion. 100 mm dia (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
553.2
287
159188.83
... More
S&F of 40 Amp. DP MCB (10 KA) C Curve CAT A
(Make- Havells/Philips/Legrand or equivalent)
6
1180
7080
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 80mm dia..
12
2015
24180
... More
Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level :1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
38.81
6897
267679.17
... More
Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : Anodised aluminium (anodised transparent or dyed to required shade according to IS: 1868, Minimum anodic coating of grade AC 15) and glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. With float glass panes of 4.0 mm thickness. Carben Steel galvanised dash fastner (min 5 micron) of 10 mm dia double threaded 6.8 grade counter sunk head screw comprising of 10 mm dia polyamide PA 6 grade sleave. Size 10 mm x 140 mm. Assuming 1.65 x 1.50 Mt. window with Two openable shutters of 1.20 x 0.50 Mt. and 1 fixed panel of 1.20 x 0.50 Mt. with Top portion of window having three No. fixed glazing of 0.45 x 0.50 Mt. Weight of Aluminium frame using 20036 Jindal aluminium section 82.5x38x1.7. Weight of Aluminium Shutter using 19526 Jindal aluminium section 47.62x44.45x1.62. AR (Make Hindustan Aluminium Company (HINDALCO), Vedanta Aluminium Limited, India Foils Limited, Sacheta Metals, Jindal Aluminium etc.)
172.8
4718
815377.54
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 100mm dia..
12
2525
30300
... More
Supplying & Laying of 1800 mm x 900 mm X 12 mm thick chequered rubber matting of tested quality
7
2550
17850
... More
Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 65 mm dia
15
135
2025
... More
Supply, assembly, erection, testing and commissioning of pumping system comprising the following:Vertical/ Horizontal centrifugal pumps with mechanical seal, SS Volute casing and SS impeller connected to suitable capacity TEFC induction motor suitable for 415 ± 10 % volts, 3 phase, 50 cycles A.C. supply with 100 mm dia. pressure gauges including MS skid and mounting of the pumps on the skid. (Motor to be of the same make as the pump) Pump Capacity (10m3/h@60M), 3HP (1 Working + 1 Stand-by) Domestic Water Supply MAKE - LUBI INDUSTRIES LLP/EQ
1
189384
189384.5
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 150 mm dia
4
8792
35170.48
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 7.5
10
9737
97372.5
... More
Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 Nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.
24
95
2291.28
... More
Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. DSR 13.80 (Make DR. FIXIT, JK, Nerolac, Dulux, Asian Paints, Berger Paints India Ltd etc.)
48505.23
118
5771152.27
... More
Supply of Guru/Fibing or equivalent make pressure gauge.
2
12000
24000
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 250 mm. dia. RCC Pipes
180
686
123494.4
... More
Supplying & fixing 63 mm dia gun metal short branch pipe with 20 mm nominal internal diameter size nozzle conforming to IS 903 suitable for instantaneous connection to interconnect hose pipe coupling as
required : Gun metal
26
1906
49561.72
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore
2
474
949.14
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 40mm dia..
4
1440
5760
... More
Providing and fixing in position pre-cast R.C.C. manhole cover and frame
of required shape and approved quality M D - 10 Square shape 450 mm internal dimension
4
1057
4228.84
... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 20 mm dia nominal bore
45
119
5371.65
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 45 watt to 50 Watt. Confirming to IP 66 protection complete in all respect CAT AA
(Make- Havells/Philips/Bajaj or equivalent)
8
2770
22160
... More
Providing & laying of light cinder filling/coil under floor of toilets & other sunken roofs..
266.88
1250
333600
... More
Providing and fixing of pressure switches in MS pipe line including connection extra as required.
2
1219
2439.58
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Lintels, beams, plinth beams, girders, buttresses and cantilevers. DSR 5.9.5
8524.97
561
4786685.41
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 100 mm dia
6
8718
52310.7
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . T fitting 50mm .(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
2
100
200
... More
Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore (Make Kohler, Roca, Jaquar, Parryware, Hindware etc.)
768
437
336299.52
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc 40mm dia. Pipe (for wash basin & sunken toilet spout).(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
450
255
114750
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 200 mm dia
2
11998
23996.64
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 2 way-100 mm dia M.S. Pipe
2
5319
10638.88
... More
Supplying and fixing 40A four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. (Make- Havells/Philips/Legrand or equivalent)
96
765
73471.68
... More
Providing and laying Non pressure NP 2 class (light duty) RCC pipe with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1cement : 2 fine sand ) including testing of joints etc. complete. 150 mm. dia. RCC Pipes
120
424
50913.6
... More
Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having glass mica fire barrier tape covered by an extruded layer of cross linkable Ethylene Propylene Runner (EPR) inshulation and LSZH inner bedding, steel wire armouring & FRLS outer sheath complete as required.
1360
283
385220
... More
Supplying and fixing of fire brigade connection of cast iron body with gun metal male instantaneous inlet couplings complete with cap and chain as reqd. for suitable dia MS pipe connection conforming to IS 904 as required : 4 way-150 mm dia M.S. Pipe
2
11025
22050.98
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 6 sq.mm. + 1 x 6 sq.mm. earth wire (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
270
346
93519.9
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore
3
411
1235.1
... More
32 mm dia G.I Pipe Medium class
260
264
68681.6
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works above plinth level upto floor V level
Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR 5.33.2.1) Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
1512.78
7518
11373564.13
... More
Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.
23
227
5230.43
... More
Supply and fixing of recess/ Surface/ Pendent mounting round 6 Watt 8 Watt LED Down Lighter having Powder coated die cast aluminium housing
with heat sink, diffuser/ Reflector and driver set complete in all respect. CAT AAA
(Make- Havells/Philips/Bajaj or equivalent)
930
700
651000
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 15 mm dia nominal bore (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
1150
379
436494
... More
Supplying, installation, testing and commissioning of weather proof M.S door and glass fire door size 2100 mm x 900mm fabricated from 1.6mm thick M.S. sheets and M.S angle 40mmx40mmx6mm complete with glass, locking arrangements to accommodate.
26
9003
234078
... More
Providing & fixing soil, wast and vent pipe. 75 mm dia sand cost iron S&S pipe.
8
796
6372.8
... More
Supplying, installation, testing & commissioning of main control and indicating panel made out of 16 SWG MS sheet to accommodate the following items duly powder coated in approved colour with louvers for ventilation, locking arrangement, audio and visual indication for fire alarm and public address system, monitoring system including connections, interconnections etc complete as required. 6 zone panel for fire alarm system 100 watt amplifier racks suitable for operation on 230V AC/24V DC supply conforming to IEC-268-3 complete with all accessories as required- 2 Nos.(one to act as standby) Talk back master station with LED PTT (press to talk) push button for operation on 230V AC/24 V DC supply conforming to IEC-268 for simplex mode of operation/communication suitable for 20 Nos.talk back unit -1 set. Annoucement control desk suitable for selection of different zones selectively and ON ALL CALL switch with visua indication etc., complete as required- 1 set. Amplifier change over switch for inter changing amplifier- 1 No. Monitor panel for loudspeaker complete output selector ON/OFF switch, fuse visual indications etc. complete as required- 1 No. Gooseneck microphone with stand and ON/OFF switch -1 No. Mains ON/OFF switch, fuse indication lamps, DC and AC voltmeters & ammeters terminal blocks etc. complete as required -1 set. Battery charger trickle cum boost to take complete load of fire alarm & PA system complete with all accessories including providing & fixing of 2 nos. 12 volt,30 AH each sealed maintenance free batteries -1 set. 6 zone panel
2
38438
76877
... More
Brick work with Common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:1:4 (1 cement : 4 sand) DSR 6.1.1 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
212.22
5619
1192544.82
... More
Providing & fixing Brass Compact Pressure Reducing Valve of brass body with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. 25 mm dia nominal bore.
16
36610
585760
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 3 pin 5/6 amp socket outlet
(Make- Havells/Philips/Legrand or equivalent)
1592
96
153245.92
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 65mm dia nominal bore
2
1328
2656.7
... More
Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture. DSR 13.48.2 (Make Royal Paints, Asian Paints, Berger Paints India Ltd, etc.)
3378.48
134
454033.93
... More
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc. complete. 50mm dia. .
2
36610
73220
... More
Supply and laying of 3 core standered aluminium
conductor XLPE (Cross linked polyethylene) insulated
PVC bedded, Galvanised flat steel strip armoured cables
confirming to I.S. 7098 (Part-II with latest amendments) II KV grade Through hume pipe The armouring of cable shall be properly connected with earth conductor by clamps etc. (f) 120 sq. mm 3 core
(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
60
1310
78600
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 70 sq. mm (45 mm)
4
369
1477
... More
Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 25 mm dia nominal bore
115
23
2651.9
... More
Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
4
20481
81926.28
... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 32 mm dia nominal bore
20
125
2514.6
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 20 mm dia nominal bore
115
333
38344.45
... More
S/B of 600mm x 600 mm x 6.0 mm G.I. plate vertically for earthing with its top at least 3 metres below ground level complete with 20mm dia G.I. pipe and funnel for watering and one earthing lead on one no. 8 to 10 SWG GI wite in 15mm dia G.I. pipe up to switch board (from appron to switch board the cost of G.I. , pipe and G.I. wire will be extra) 30 cm square C.I. frame with hinged cover masonry housing alternate layers of charcoal. coke and salt at least 150mm thick alround etc. as per directions of E/I complete in all respects as per drawing.
2
5365
10730
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100 mm dia
2
5260
10520.52
... More
Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or on surface of wall for lightning conductor and external lighting complete as required. (For Horizontal run)
750
99
74557.5
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 15 mm dia nominal bore
75
9
689.25
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 750 mm width X 75 mm depth X 2.0 mm thickness
30
1791
53730.9
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Single Tee without door 110mm.(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
50
365
18250
... More
Providing and laying design mix cement concrete of M-30 grade, in roads/ taxi tracks/ runways, using cement content as per design mix, using coarse sand and graded stone aggregate of 40 mm nominal size in appropriate proportions as per approved & specified design criteria, providing dowel bars with sleeve/ tie bars wherever required, laying at site, spreading and compacting mechanically by using needle and surface vibrators, levelling to required slope/ camber, finishing with required texture, including steel form work with sturdy M.S. channel sections, curing, making provision for contraction/ expansion, construction & longitudinal joints (10 mm wide x 50 mm deep) b groove cutting machine, providing and filling joints with approved joint filler and sealants, complete all as per direction of Engineerin-charge (Item of joint fillers, sealants, dowel bars with sleeve/ tie bars to be paid separately).Cement concrete prepared with batch mixing machine DSR 16.43.1 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
18.9
7666
144901.39
... More
Providing and fixing C.P. brass shower rose with 15 or 20mm inlet 150 mm diameter (Make Kohler, Roca, Jaquar, Parryware, Hindware etc.)
192
169
32551.68
... More
Constructing masonry Chamber 60 x 60 x 75 cm, inside with 75 class designation brick work in cement mortar 1:4 (1 cement : 4 fine sand) for sluice valve, with C.I. surface box 100mm top diameter, 160 mm bottom diameter and180 mm deep (inside) with chain lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design. With F.P.S. bricks
1
8282
8282.33
... More
Supply and laying of aluminium conductor PVC
insulated armoured served sheathed cables 1100 Volts
grade Through Hume Pipe & G.I Conduit. On surface the cable
run shall be fixed on M.S. clamps etc. of suitable size or
as directed by the Engineer-Incharge, complete in all
respect. The armouring of the cable shall be properly
connected with the earth conductor by clamps etc. 16 sq. mm 4 core
(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
3960
173
685080
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws. DSR-9.21.3 (Make Modak Ply
Maxon Doors, Century Ply, Green Ply, Northern Ply etc.)
620.68
1596
990853.55
... More
Development by air compressor including Transportation.
50
2400
120000
... More
Supplying, filling, spreading & leveling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
52.44
1172
61505.83
... More
Supply and fixing of water tight oblong 10 Watt LED bulkhead luminaire with driver set confirming to IP 65 and above Protection . complete in all respect CAT AA
(Make- Havells/Philips/Bajaj)
90
1400
126000
... More
Supply of 450mm size Metalic heavey duty exhaust fan suitable for 230V, 50 Hz AC including modifying and finishing for hole/opening for the size of fan, MS louver/ shutter complete with frame for Ex.fan including its connection with 3x2.5 sq mm FRLS copper conductor wire with PVC sleeve, loop earthing, making the good damage complete as required to do the job in all respect in accordance with laid specification or upto the satisfaction of engineer in charge. Make : Hevells (Modle Turbo Force Neo) .
4
7680
30720
... More
Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (DSR 8.31)( Make Kajaria Ceramic, Somany Ceramics, H&R, Johnson tiles, HSIL, Asian Granito India, Cera India. etc.)
3087.12
966
2984565.87
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm dia
5
6068
30341
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Columns, Pillars, Piers, Abutments, Posts and Struts. DSR 5.9.6
11776.24
732
8631630.63
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Elbow (90°) 40mm . (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
190
55
10450
... More
Supply of 80mm dia C.I. double flanged ISI mark sluice valve with hand wheel of upadhya or equ. Make.
4
10000
40000
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 110% of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement.
All works upto plinth level
Concrete of M25 grade with minimum cement content of 330 kg /cum (DSR 5.33.1.1) Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
1571.38
7247
11388026.57
... More
Chequered terrazo tiles 22 mm thick with graded marble chips of size up to 6 mm in floors, jointed with neat cement slurry mixed with pigment to match the shade of the tiles, including rubbing and polishing complete, on 20 mm thick bed of cement mortar 1:4 (1 cement :4 coarse sand) Ordinary cement without any pigment : DSR 11.19.4
8.64
1051
9084.61
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 10 sq.mm. + 1 x 6 sq.mm. earth wire (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
80
449
35978.4
... More
Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying : a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours. b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours. The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. DSR 22.5
1515.44
470
712999.37
... More
Erection & commissioning of pumping plants complete along with electric wiring.
2
15000
30000
... More
Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.
0.68
1795
1220.87
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 50 mm dia nominal bore
160
799
127894.4
... More
Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 32 mm dia nominal bore
90
27
2494.8
... More
Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.
207.84
642
133514.34
... More
LT PANEL
Design, Supply, installation, testing and commissioning of indoor/outdoor floor mounted/ wall mounted, IP43/IP65, IEC 61439/IS 8623, factory built, modular, sectionalised, compartmentalized, extendable type HT/LT cubicle panel of suitable size suitable for operation on 33/11/0.433/0.415 kV, 50 Hz AC 3 phase supply system fabricated from CRCA sheet steel of 2mm thick for frame work and covers, 3mm thick for gland plates with stiffeners wherever required, having vibration free structure chemically treated with seven tank process or better before painting for surface treatment and powder coated in approved shade, with suitable electrolytic grade high conductivity bus bars extensible, DMC/ SMC (whichever is superior) bus bar supports, with short circuit withstand capacity as mentioned ,bottom base channel of section not less than 100mmX 50mmX 5 mm thick, fabrication shall be done in transportable sections, entire panel shall have a common earth bar of required size at the rear with 2 Nos. earth stud, connections and interconnection with solid conductor wires / copper strips, neutral links, control wiring with 1.5 sqmm. & 2.5sqmm. PVC insulated FRLS copper conductor S/C cable for voltage & current respectively, including providing and fixing following switch gears as per SLD ,technical specifications etc.complete in all respect so as to fulfill all as required.
The minimum clearances between bus bars shall be as follows :
Phase to phase - minimum 20mm
Phase to neutral-minimum 15mm
Incoming :
1Nos 500 Amp. 4P MCCB of 36kA Breaking capacity
Metering :
1 Set of CT's one of 500/ 5Amp ratio for Multifunction Meter
1 Nos. Set of Phase Indication Lamp.
1 Nos. of class-III Type SPD
Bus Bar :
600 Amp.TPN aluminimum bus bar of suitable length.50KA
Outgoing :
Phase indication lamps on each outgoing to be provided.
6 No.63 Amp 4P MCCB. (10 KA)
4 No.63 Amp 4P MCB. (10 KA)
55 No.40 Amp 2P MCB. (10 KA)
Panel described as above with 2 Years AMC & comprihensive warranty..
2
646000
1292000
... More
Providing & fixing double flanged Metallic expansion with M.S. fixed flanges (PN-1.6) joint (suitable for system test pressure) of standard length as per manufacturers specs including rubber gaskets, flanges, nuts, bolts and washers complete as required as per specifications. 80 mm dia
6
17667
106005.54
... More
Supplying and fixing orifice plate made out of 6 mm thick stainless steel (Grade 304) with orifice of required size to be fitted between flange & landing valve of external and internal hydrants to reduce pressure at the outlet to the level of 3.5 kg/cm2 complete as required.
30
1042
31268.1
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 100 mm dia
50
2015
100795
... More
Supplying and Fixing of Fire Man's axe with heavy insulated rubber as per standard conforming to IS 926.
26
1113
28955.94
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 100mm dia.
17
2525
42925
... More
Supply of Tool & First Aid Box with all necessary tools for maintenance of electrical installation & First aid..
2
950
1900
... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more. DSR-5.22.6 (Make SAIL TATA TISCON, JSW NEOSTEEL TMT etc.)
7494.46
8223
61629267.86
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 65mm dia.
4
1745
6980
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 20mm dia nominal bore
16
411
6587.2
... More
Supply, assembly, erection, testing and commissioning of pumping system comprising the following: MONOBLOCK PUMP, 2HP, 3PH HEAD RANGE: 20 to 40 Mtrs
FLOW RANGE: 124 to 20 LPM
SUCTION X DELIVERY SIZE: 25 X 25 mm
MAKE - LUBI INDUSTRIES LLP/EQ
FOR FILTER FEED PUMP
2
17140
34280
... More
Providing and fixing SWR PVC trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : 110mm x 110mmX110mm (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.).
285
1220
347700
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall / Terrace 20 mm dia nominal bore (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
2355
255
601537.65
... More
Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm DSR 11.41.2 Make Kajaria, Somany, H&R Johnson tiles · HSIL Asian Granito, Cera etc.
5775.6
1184
6841024.93
... More
S&F of 40 Amp. 4 pole MCB (10 KA) CAT A
(Make- Havells/Philips/Legrand or equivalent)
106
2275
241150
... More
Plumbing Panel
Incoming :
01 No. 100 Amp 4P MCCB. (25 KA)
01 No. 100 Amp 4P ATS
Metering :
1 Set of CT's one of 100/ 5Amp ratio for Multifunction Meter
1 Set of CT's one of 100/ 5Amp ratio 50/51
1 Nos. Set of Phase Indication Lamp.
1 Nos. of class-III Type SPD
Bus Bar :
1 Set of 200 Amps TP Aluminium Bus Bars
Outgoing :
Phase indication lamps on each outgoing to be provided.
03 No.63 Amp 3P MCCB. (25 KA)
02 No.40 Amp 3P MCCB. (25 KA)
01 No. 25 Amp 3P MCCB. (25 KA)
01 No.63 Amp DP MCB. (10 KA)
Starter As per Type 2 & Pump Rating
Panel described as above and with two years AMC & Comprihensive warranty
2
195000
390000
... More
Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete.
1353
206
280030.41
... More
Extra for brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means. DSR 6.13.2+6.14 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
2428.88
868
2109020.79
... More
Supply & fixing of 200 mm. dia Bail plug
2
1300
2600
... More
Fabricating, Supplying, Installation, Testing and Commissioning Air Vessel of continuous welded construction with flanged discharge header in pump house fabricated out of 10 mm thick dished ends and 8 mm thick MS sheet, Air Release Valve, complete with drain arrangement with 25 mm dia gun metal wheel valve complete with all accessories etc. as required of the following sizes: 2 Meter high and 450 mm dia suitable to operate Jockey Pump, Main Fire Pump & Diesel Engine Driven Fire Pump.
2
24940
49880.6
... More
Supplying, filling, spreading & leveling coarse sand of size range 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -incharge.
52.44
1172
61505.83
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 80 mm dia
2
3716
7432.38
... More
Providing & fixing sand cost iron terminal guard 75 mm dia.
8
259
2078.24
... More
Supply, Installation, Testing and Commissioning of 100/150 mm dia Bourden type, Stainless Steel dial type Pressure Gauge including brass isolation valve and siphon pipe having calibration of 0 - 16 Kg / cm2 .
26
1502
39066.04
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 15/16 amp switch
(Make- Havells/Philips/Legrand)
692
123
85171.36
... More
Providing and laying in position cement concrete of specified gradeexcluding the cost of centering and shuttering - All work up to plinthlevel :1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size) (DSR-4.1.8)
393.19
5193
2042224.93
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1cement :1fine sand) including testing of joints etc. complete : 150 mm diameter RCC Pipes
30
530
15915.9
... More
Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) (a) 250 mm x 10mm
1355
63
86679.35
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Single tee with door 110x110x110 mm (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
40
178
7141.2
... More
Providing, laying and fixing following dia RCC pipe NP2 class (light duty) in ground complete with RCC collars, jointing with cement mortar 1:2 (1 cement : 2 fine sand) including trenching (75 cm deep) and refilling etc as required. 300 mm dia
630
899
566659.8
... More
Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. 70 sq. mm 3-1/2 core
(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
60
613
36780
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 40 mm dia nominal bore
20
470
9409.8
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 80mm dia.
2
2015
4030
... More
Supply & fixing of 350 mm. dia housing clamp
2
6000
12000
... More
Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade:New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) DSR 13.47.1 (Make Royal Paints, Asian Paints, Berger Paints India Ltd, etc.)
13498.19
130
1760973.87
... More
Development by O.P. Unit including Transportation.
50
1500
75000
... More
Supply & fixing of 350 mm. dia Socket
16
1600
25600
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 100 mm diaf
80
3237
258971.2
... More
M.S. or Iron work of small sizes and sections such as holding down bolts, hold fast tie rods, gratings etc. wrought to required from including supply of steel bolts, nuts wastage etc and fixing required for proper completion of the work.
Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size). DSR 9.53
3528
174
615600.72
... More
Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (C ) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e ) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm. Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
950.18
1284
1220477.7
... More
Wiring for light/ Power plug with 2X4 sq. mm FRLS PVC insuleted copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 Nos. 4 sq.mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
17396
263
4584367.88
... More
Supply and fixing of LED Tube Light batten fitting suitable for up to 1 X 22 watt LED tube light on surface complete in all respect. CAT AAA
(Make- Havells/Philips/Bajaj or equivalent)
926
620
574120
... More
Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single pole
(Make- Havells/Philips/Legrand or equivalent)
1114
201
225005.72
... More
50 mm dia G.I Pipe Medium class
875
424
371560
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 150mm dia.
3
3620
10860
... More
Supply of glass strips for flooring. 35mm wide & 4 mm thick.
131.22
69
9180.15
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 50 mm dia
2
2985
5971.16
... More
Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) (a) 250mm x 16mm .
1354
147
199972.26
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 150mm dia
7
7069
49486.08
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 x 2.5 sq.mm. + 1 x 2.5 sq.mm. earth wire (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
22582
216
4899842.36
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 80 mm dia
2
6068
12136.4
... More
Supply & laying of 200 mm. dia slotted pipe (8 mm. thick)
80
2500
200000
... More
15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement : 6 coarse sand) DSR-13.5.2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
13444.74
301
4052916.87
... More
Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/ bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer -in-charge, beyond 90 metre & upto 150 metre depth below ground level. Drilling of 300mm dia bore hole manually.
60
629
37774.8
... More
Supplying and fixing of Self Glow Exit signage for stairs and exits made out from not less than 4 mm of transparent acrylic sheet of 300 x 150 mm size with self illuminated plastic words of 100 mm height suspended from ceiling by means of M.S. chain or fixed of the walls as required and as directed at site..(MAKE : Agni Suraksha (ASES)
82
450
36900
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1cement :1fine sand) including testing of joints etc. complete : 100 mm diameter RCC Pipes
110
338
37205.3
... More
Add for using extra cement in the items of design mix over and above the specified cement content therein. DSR-5.35 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
1848.07
559
1033588.59
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 25 mm dia nominal bore
190
13
2658.1
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 25 sq. mm (28mm)
(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
8
246
1975.68
... More
Forming groove of uniform size from 12x12 mm and upto 25x15 mm in the top layer of washed stone grit plastered surface as per approved pattern, including providing and fixing aluminum channels of appropriate size and thickness (not less than 2 mm), nailed to the under layer with rust proof screws and nails and finishing the groove complete as per specifications and direction of the Engineer-in-Charge. DSR 13.76
11166.42
76
856576.08
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Shoe (Plain) 110mm shoe (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
72
100
7238.16
... More
Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.
22
41
917.62
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 40 mm dia nominal bore
50
619
30952.5
... More
Extra for depth for manholes: Size 90x80cm With common burnt clay FPS (non modular) bricks of class designation 7.5
2
6729
13458.32
... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 15 mm dia nominal bore
75
117
8832
... More
Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-in-Charge. 80mm thick cement concrete paver block of M-30 grade with approved colour, design & pattern.
66.04
832
54961.13
... More
Supply & fixing of 350 mm. dia well cap
2
2200
4400
... More
Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc Internal work - Exposed on wall / Terrace 25 mm dia nominal bore
80
420
33652.8
... More
Supply of 80mm dia C.I. double flanged ISI mark reflex valve of updadhya or equ. Make.
2
6500
13000
... More
Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) :25 mm thick. DSR 11.26.1
3686.01
1485
5475567.86
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished,premoulded and prepolished, machine cut for kitchen platforms, vanitycounters, window sills , facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cementmortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement,mixed with matching pigment, epoxy touch ups, including rubbing, curing,moulding and polishing to edges to give high gloss finish etc. complete at all levels.Area of slab over 0.50 sqm (Granite of any shade) DSR 8.2.2.2
285.12
3916
1116618.31
... More
Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-lll) including manufactured sand derived from Recycled Concrete Aggregate (RCA) upto 25% : 4 graded stone aggregate 20 mm nominal size including Recycled Concrete Aggregate (RCA) upto 25%) Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
20.93
6007
125730.07
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Vent Cowl 110mm.(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
48
175
8400
... More
Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in-charge. 150 mm nominal size dia (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
60
615
36939.6
... More
Supplying and making outdoor cable end termination with heat shrinkable jointing kit complete with all accessories including lugs suitable for following size of 3 core, XLPE aluminium conductor cable of 11 KV grade as required:
6
15858
95153.4
... More
12 mm cement plaster of mix : 1: 6 (1 cement : 6 coarse sand) DSR-13.4.2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
26706.41
262
6997880.61
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:1:6 (1 cement : 6 sand) DSR -6.1.2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
5.5
5438
29909.94
... More
Providing and fixing angle iron frames for doors, windows and ventilators of mild steel Angle sections of size 40X40X5 mm, joints mitred and welded by angle iron 40X40X5 mm or 40x 5 mm flat pieces to the existing T-iron frame or to the wall with dash fastener, including fixing of necessary butt hinges and screws and applying a priming coat of approved steel primer, all complete as per the direction of Engineer-In-charge. (by weight) DSR 10.31 (Tata Steel, SAIL, Jindal Steel, Bhushan Steel, and Essar Steel, etc. )
13424.1
99
1335697.95
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 100 mm. dia. RCC Pipes
110
349
38456
... More
Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design. Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With common burnt clay FPS (non modular) bricks of class designation 7.5
10
9737
97372.5
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 100mm dia
6
5260
31561.56
... More
Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS: 8931. 15 mm nominal bore (Make Kohler, Roca, Jaquar, Parryware, Hindware etc.)
192
511
98150.4
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 150 mm dia
210
2819
592176.9
... More
Supplying, installation, testing and commissioning of electric driven pressurisation pump suitable for automatic operation and consisting of following, complete in all respects, as required : (Jockey Pump) Horizontal type, multistage, centrifugal pump of cast iron body and bronze impeller with stainless steel shaft, mechanical seal conforming to IS : 1520. Suitable HP squirell cage induction motor TEFC type suitable for operation on 415 volts, 3 phase 50 Hz AC supply with IP 55 class of protection for enclosure, horizontal foot mounted type with Class-'F' insulation, conforming to IS : 325. M.S.fabricated Common base plate, coupling, coupling guard, foundation bolts etc. as required. Suitable cement concrete foundation duly plastered and with anti vibration pads. 180 lpm at 88 m Head.
2
100319
200639.54
... More
Providing and fixing pre-moulded joint filler in expansion joints of RCCroads / CC pavements after making the joints dust free with high pressureair jet cleaners, all complete as per direction of the Engineer-in-Charge.(Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)DSR 16.45
275
3
1061.5
... More
Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)
1.19
8275
9847.39
... More
Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 150 mm dia
20
294
5880
... More
Supply and fixing danger board fabricated from 10 gauge M.S. Sheet as per I.E. Rules..
2
85
170
... More
Supply & fixing of 7W LED Bulb complete in all respects. (Make- Havells/Philips/Bajaj/ or equivalent)
672
100
67200
... More
Cement concrete flooring 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 12-20mm nominal size laid in one layer neat cement (25 mm thick floor).Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
12.25
504
6183.8
... More
Supplying and fixing 63 mm dia, 15 m long RRL hose pipe with 63 mm dia male and female couplings duly bound with GI wire, rivets etc. conforming to IS 636 (type-A) as required : Gun Metal
26
4104
106713.88
... More
Supply and fixing of finolex or equivalent ISI marked submersible copper cable of size 2x3x2.5 sq. mm.
138
180
24840
... More
Extra for brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means. DSR 6.4.2+6.5*2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
594.36
7201
4280271.65
... More
Providing & fixing Brass Compact Pressure Reducing Valve of brass body with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc. 32 mm dia nominal bore.
8
36610
292880
... More
Providing and filling in position rubberized bitumen hot sealing compound for sealing of expansion joints in roads / pavements all complete as per direction of the Engineer-in-Charge.DSR 16.46.1
275
6
1732.5
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 150 mm dia
4
7069
28277.76
... More
Providing, laying and jointing glazed stoneware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1cement :1fine sand) including testing of joints etc. complete : 250 mm diameter RCC Pipes
50
1147
57399
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 6 pin 15/16 amp socket outlet
(Make- Havells/Philips/Legrand or equivalent)
692
155
107557.56
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil. DSR-2.8.1
5159.05
198
1023916.65
... More
Providing and applying of 125 micron polytheen sheet including all complete.UP PWD SOR basic rate © Material MORD M-104
126
16
2016
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 32mm dia nominal bore
2
525
1051.6
... More
Transportation Charges of drilling equipment including assembly and other material as required.
2
20000
40000
... More
Supply of 80mm dia C.I. tee heavy quality i/c cost of material.
20
2000
40000
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Single tee without door 110x110x110 mm (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
220
168
37129.4
... More
Providing lead caulked joints to sand cost iron/ cetrifugally cast (squn) irons pipes & fitting of dia. 75 mm
4
401
1605
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required 150 mm dia
2
14033
28066.3
... More
Providing and fixing gun metal gate valve with wheel of approved quality. 40mm dia nominal bore
3
629
1889.64
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 32 mm dia nominal bore
20
16
338.6
... More
Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore 15 mm nominal bore (Make Kohler, Roca, Jaquar, Parryware, Hindware etc.)
192
609
116962.56
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 25 mm dia nominal bore
190
356
67763.5
... More
Supply and laying of aluminium conductor PVC
insulated armoured served sheathed cables 1100 Volts
grade Through Hume pipe. On surface the cable
run shall be fixed on M.S. clamps etc. of suitable size or
as directed by the Engineer-Incharge, complete in all
respect. The armouring of the cable shall be properly
connected with the earth conductor by clamps etc. 400 sq. mm 3-1/2 core
(Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
675
1878
1267650
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 100 mm dia
2
5257
10515.8
... More
12mm cement plaster on single or half brick wall mix 1:3 (1 cement : 3 Coarse sand) Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
255.03
342
87416.63
... More
Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. Double strip (horizontal type). DSR-9.114.2
384
30
11623.68
... More
Extra for brick masonry in superstructure above floor V level, for each four floors or part thereof by mechani cal means. DSR 6.4.2+6.5*2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
2737.06
879
2407928.54
... More
Providing orange colour safety foot rests of minimum 6 mm thick plastic encapsulated as per IS:10910 on 12 mm dia steel bar conforming to IS:1786 having minimum cross section as 23 mm x 25 mm and over all minimum length 263 mm and width as 165 mm with minimum 112 mm space between protruded legs having 2 mm thread on top surface by ribbing or chequering besides necessary and adequate anchoring projections on tail length on 138 mm as per standard drawing and suitable to with stand the bend test and chemical resistance test as per specifications and having manufacture's permanent identification mark to be visible even after fixing, including fixing in manholes with 30x20x15 cm cement concrete block 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) complete as per design.
69
422
29130.42
... More
Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) all-round S.W. pipes including bed concrete as per standard design : 100 mm dia
250
735
183900
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Suspended floors, roofs, landings, balconies and access platform. DSR 5.9.3
12354.85
707
8735002.5
... More
Providing laying, testing & commissioning of 'C' class heavy duty MS Pipe conforming to IS 1239/3589 i/c fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. in ground including welding, excavation & providing cement concrete blocks as supports, anticorrosive treatment with coaltar/asphalt tape as per IS 10221, refilling the trench etc. of following sizes complete as required. 150 mm dia.
120
4601
552177.6
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Coupler 110 mm (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
96
103
9965.76
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design: 150 mm. dia. RCC Pipes
30
566
16998
... More
Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture DSR 13.48.3 (Make Royal Paints, Asian Paints, Berger Paints India Ltd, etc.)
1592.69
130
207288.6
... More
Providing and fixing on wall face unplasticised PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS:13592 Type A including jointing with seal ring conforming to IS:5382 leaving 10mm gap for thermal expansion. Bend 87.5 degree 110mm bend (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
58
114
6649.12
... More
Supplying, filling, spreading & leveling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge.
48.52
1151
55855.74
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 250 mm. dia. RCC Pipes Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
180
775
139564.8
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.
Concrete of M30 grade with minimum cement content of 350 kg /cum
All works upto plinth level
5.33.1.2 Concrete of M30 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
49.71
7362
365977.45
... More
Providing and fixing M.S. holder bat clamps of approved design to C.I. or S.C.I. rain water pipes embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and cost of cutting holes and making good the walls etc. : 110mm dia pipe.
850
276
235161
... More
Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20 mm dia nominal bore
45
281
12647.25
... More
Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding
modular plate etc. as required
(Make- Havells/Philips/Legrand or equivalent)
480
291
139747.2
... More
Extra for R.C.C./ B.M.C/ R.M.C. work above floor V level for each four floors or part thereof. DSR-5.33.2.1+5.38*2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
1293.82
8060
10429056.06
... More
Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 50 mm dia nominal bore
85
38
3305.65
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 150 mm dia
2
14033
28066.3
... More
Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to |.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 DSR 11.46.2
666.48
1237
824795.66
... More
Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters :
(a) 35mm thick Single leaf DSR 9.21.1 (Make Modak Ply, Maxon Doors, Century Ply, Green Ply, Northern Ply etc.)
1689.24
1824
3081748.1
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 25mm dia..
8
1290
10320
... More
Supply of 80mm dia M.S. column pipe clamps with nut, bolts, packing etc.
4
1400
5600
... More
Fire Panel
Incoming :
01 No. 250 Amp 4P MCCB. (50 KA)
01 No. 250 Amp 4P ATS
Metering :
1 Set of CT's one of 250/ 5Amp ratio for Multifunction Meter
1 Set of CT's one of 250/ 5Amp ratio 50/51
1 Nos. Set of Phase Indication Lamp.
1 Nos. of class-III Type SPD
Bus Bar :
1 Set of 300 Amps TP Aluminium Bus Bars Outgoing :
01 No.125 Amp TPN MCCB. (50 KA)
02 No.63 Amp TPN MCCB. (50 KA)
Panel described as above and with two years AMC & Comprihensive warranty
2
170608
341216
... More
Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m : All kinds of soil Pipes, cables etc. exceeding 80mm dia but not exceeding 300mm.
700
268
187957
... More
Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 4 x 16 sq.mm. + 2 x 6 sq.mm. earth wire
100
1076
107699
... More
Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 100 mm dia
15
203
3045
... More
Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). DSR 9.136 (Make JC FIRE DOOR, Metaflex Doors India, Godrej Security Solutions, Navair International, Promat India etc.)
168
1303
218947.68
... More
Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required. 100 mm wide x 50 mm depth x 1.6 mm thickness.
80
527
42227.2
... More
Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, conforming to IS 884 complete with the following as required. 20 mm nominal internal dia water hose thermoplastic (Textile reinforced) type -2 as per IS: 12585 20 mm nominal internal dia gun metal globe valve & nozzle. Drum and brackets for fixing the equipmets on wall. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket 40M
26
9525
247665.6
... More
Providing, laying, testing & commissioning of 'C' class heavy duty MS pipe conforming to IS 3589/IS 1239 including Welding, fittings like elbows, tees, flanges, tapers, nuts bolts, gaskets etc. and fixing the pipe on the wall/ceiling with suitable clamp/support frame and painting with two or more coats of synthetic enamel paint of required shade complete as required : 200 mm dia
30
4310
129309.3
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 45 cm length 15 mm nominal bore (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
192
74
14309.76
... More
Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine/ medium/ coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer-in-charge.
4
1543
6174.52
... More
Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 32A FP MCB Triple pole and neutral (Make- Havells/Philips/Legrand or equivalent)
4
968
3875.56
... More
Extra for brick masonry in superstructure above floor V level, for each four floors or part thereof by mechanical means. DSR 6.4.2+6.5 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
528.64
7072
3738690.1
... More
Supplying and fixing following modular switch / socket on existing modular plate and switch box including connections but excluding modular plate etc as required. 5/6 amps switch (Make- Havells/Philips/Legrand or equivalent)
1592
81
129381.84
... More
Fixing of lightning conductor finial (single prong) with base plate including holes etc. complete as required.
10
284
2840.4
... More
Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in M.S. box (16 SWG) with hinged cover plate & suitable for operationwith amplifier i/c line matching transformer etc. complete as required.
26
439
11426.22
... More
Providing and fixing ISI marked flush door shutters conforming to IS :2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters
both side laminated
3.15
728
2296.13
... More
TRANSFORMER
Supply and fixing of 500 KVA, 11/0.415 KV, 3 Phase ONAN,
Level 1, core type copper wound outdoor type transformer with
voltage ratio between phase at no load as 11000/433 V arranged
for star/delta connection as per vector group Dyn11 with neutral
brought out on L.V. side. The work will include all standard fitting
and accessories, T&P men & material required for proper
completion of work including first filing of transformer oil etc.
complete in all respect. The transformer would confirm to
approved GTP/Drawing/Technical of UPPCL at the time of
execution. The manufacture of transformer shall be in approved
list of DISCOM. Make(Kotsons/Trafo/or Equivalent). and with two years AMC & Comprihensive warranty
Note:Foundation work for transformer is not included in Electrical works it will come on Civil work.
2
1240000
2480000
... More
Centering and shuttering including strutting, propping etc. and removal of form for :
Foundations, footings, bases of columns, etc. for mass concrete. DSR 5.9.1
621.13
299
185724.08
... More
Providing two coats of Synthetic enamel paint of approved shade on pipes and supports as per pipe colour code over a coat of primer. Including painting of legends with direction arrow as per the approval of the Consultants / Project Manager. 80 mm dia
20
159
3180
... More
Supply and fixing of fire bucket, round bottom made of G.I. sheet 9-11 litres capacity duly painted as per fire brigade design, supported on hanging bracket chained and locked, initially filled with fine river sand, water as per directions of Engineer-in-Charge
4
490
1960
... More
Providing & fixing plane sand cost iron S&S bend of required degree. 75 mm
4
382
1529.36
... More
Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point (without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. Group C (Make- Havells/Anchor/RR Cabel/Grandlay or equivalent)
353
676
238966.88
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Elbow (90°) 50mm . (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
6
85
510
... More
Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 20 mm dia nominal bore
85
17
1507.05
... More
P/F curtain rods of 1.25mm thick chromium plated brass plate, with two chromium plated brass brackets fixed with C.P. brass screws and wooden plugs etc. wherever necessary complete (a) 25 mm dia. (DSR-9.46.3)
1286.8
400
515646.5
... More
S&F of 63 Amp. 4 pole MCB(10 KA) C Curve CAT A
(Make- Havells/Philips/Legrand or equivalent)
6
2290
13740
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Elbow (45°) 50mm . (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
4
70
280
... More
Providing and laying cement concrete 1:5:10 (1 cement: 5 coarse sand : 10 graded stone aggregate 40mm nominal size) upto the haunches of pipes including bed concrete as per standard design 150 mm. dia. RCC Pipes Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
120
566
67992
... More
Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand) DSR-6.13.2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
2671.06
856
2288751.18
... More
Installation of exhaust fan in the existing opening , including making good the damage, connection, testing commissioning etc. as required. (a): Up to 450mm sweep
292
355
103674.6
... More
Supplying and filling in plinth with sand under floor, including watering, ramming, consolidating and dressing complete. DSR 2.27
182.04
1619
294779.19
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 20 mm dia nominal bore (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
950
409
389414.5
... More
Providing M.S. foot rest including fixing with 20 x 20 x 10 cm cement concete block 1:3:6 (1 cement : 3 coarse :6 graded aggregate of nominal size 20 mm ) as per standard with 20x20 mm sqm. bar.
108
415
44854.56
... More
Providing, installation, testing and commissioning of non-return valve of following sizes confirming to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 100 mm dia
1
8718
8718.45
... More
Supply of C.I. double flanged bend of 80mm dia i/c cost of material and labour.
2
1500
3000
... More
Painting G.I. pipes and fittings with synthetic enamel white paint
with two coats over a ready mixed priming coat, both of approved
quality for new work : 40 mm dia nominal bore
75
32
2439
... More
Providing and fixing MS pipe puddle flanges of required size with 600mm long with 6mm thick MS plate of size 300mm x 300mm of suitable size properly fixed in RCC walls of water tanks, including necessary welding complete in all respect as per details shown on darwings and directions of Engineeer-in-charge for water tanks. 65mm dia..
12
1745
20940
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor v level in all shapes and size in:1:6 (1 cement : 6 sand) DSR-6.4.2 Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
624.94
6943
4339002.17
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Y' Fitting without door 110mm.(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
430
415
178450
... More
SUPLLY AND INSTALLATION, TESTING AND COMMISSIONING OF OUTDOOR LT PANEL FOR 500KVa TRANSFORMAR MAIN ACB 800A TP, VAF METER, 3NO. CT, 500/5A, INDICATOR AND CONTROL MCB ETC. COMPLETE IN ALL RESPECT and with two years AMC & Comprihensive warranty
2
165150
330300
... More
Painting G.I. pipes and fittings with two coats of anti-corrosive bitumastic paint of approved quality :- 40 mm dia nominal bore
20
19
385
... More
12 mm cement plaster finished with a floating coat of neat cement of mix : 1:3 (1 cement: 3 fine sand) Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
478.3
334
160192.24
... More
Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 16 sq. mm (28mm)
96
243
23404.8
... More
Providing and fixing uplasticised PVC connection pipe with brass unions : 30 cm length 15 mm nominal bore (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
480
64
31108.8
... More
Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required.
150
10
1539
... More
Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC pipes including jointing with seal ring leaving 10 mm gap for thermal expansion. Bend without door (45°) 110mm. (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
620
220
136400
... More
Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
29.16
468
13655.92
... More
Supply and burring of Safe Earthing Electrode T-19, (Hot Dip Galvanized), Length up to 3000mm, outer Dia 50 mm inner Dia 25 mm, terminal Dia 12mm, outer GI pipe of 16 swg and inner GI pipe of 12 swg with Hot Dip Galvanization up to 100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity and one earthing lead of 25mm x 3mm G.I. strip, upto switch board (from apron to switch board, the cost of G.I. strip will be extra) along with 30 cm square C.I. frame with hinged cover & masonry housing.
Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.
40
10040
401600
... More
Providing and filling sand of grading zone V or coarser grade alround the G.I. pipes in external work. 40 mm dia nominal bore
20
127
2546.6
... More
Supply of control panel cubical type wall mounted vermin proof with internal wiring duly enameled painted and mechanically finished having L&T of qul. Male switch fuse unit with HRC fuses, Ameter, Boltmeter, Selector switch, phase indicating lamp with bulbs, instrument fuses, power capcitor single phase preventor etc. complete set with supply of Jyoti or eq. Air break Star- Delta motro starter suitable for above submersible pump set.
2
20000
40000
... More
Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :- With common burnt clay F.P.S. (non modular) bricks of class designation 7.5
30
20133
604007.4
... More
SITC of 250 KVA RADIATOR COOLED D.G. SET IN ACOUSTIC ENCLOSURE WITH AMF OR Equivalent & Exhaust System with complete Accessories. (Make Mahindra MHEL Model H6935G1)
Providing, installation testing & commissioning of 'Silent Type Diesel Generating Set along with having prime power rating 250 KVA, Three phase 415 Volts, 6 cylinder 310HP at 1500RPM with AMF panel. This is electric start, compression ignition, 4 stroke engine design to run continuousely 1500 RPM conforms to CPCBIV+ norms with full Diesel Fuil tank at the time of testing with Two AMC & Comprihensive waranty consisting of the following:-
Diesel Engine
Diesel Engine 4 stroke radiator cooled, electric start, of suitable bhp (CPCB-4 Compliance) having Six cylinders at 1500 RPM suitable for above output of alternator , 50% RH & at 1000 metre MSL and confirming to BS 5514, BS 649, is 10000, capable of taking 10% overloading for one hour after 12 hours of continuous operation. The engine will be fitted complete with all the required accessories. The DG Set Controller shall be supplied by the same vendor of DG Set OEM.
Engine Mounted Instrument Panel fitted with and having digital display for following:
Start- stop switch with key.
Water Temperature indication
Lubrication Oil pressure indication
Battery charging indication
RPM indication
Over Speed trip Indication
Low lubrication oil Pressure trip indication
Engine Hours Indication
Alternator:
Synchronous alternator rated at 250 KVA, 415 Volts at 1500 RPM, 3 phase 50 Hz, AC Supply with 0.8 lagging power factor , 50% RH . The alternator shall be having SPDB enclosure, brushless, continuous duty, self-excited and self-regulated through AVR confirming to IS:4722/ BS 2613 suitable for tropical conditions and with class- H insulation. Alternator shall have end termination cable box on alternator to terminate the 800A Bus Duct.
Base Frame & Foundation
Both the engine and alternator shall be mounted on suitable base frame made of MS channel with necessary reinforcement which shall be installed on suitable cement concrete foundation and vibration isolation arrangement as per recommendations of manufacturer.
Fuel Tank:
Daily service fuel tank of 450 litres capacity, fabricated out of 3mm thick M.S. sheet complete with all standard accessories and fuel piping between fuel tank and diesel engine with MS class 'C pipes of suitable dia. Complete with valves level indication & accessories as required as per specifications.
Exhaust System :
Dry exhaust mainfold with hospital grade exhaust silencer / Catalytic Convertor.
Starting System:
24V DC starting system comprising of starter motors: voltage regulator and arrangement for initial excitation complete with 2 Nos. of batteries (25 plates, 160 AH lead Acid type) as required as per specifications.
Accoustic and weather proof enclosure with arrangement for fresh air intake for cooling of the engine & alternator, extraction, discharging hot air into the atmosphere as per specifications. The Acoustic Enclosure shall be factory fitted by the OEM.
Note:Foundation work for DG SETs is not included in Electrical works it will come on Civil work.
1
2280000
2280000
... More
Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.
150
31
4734
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc . Coupler 40mm .(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
80
40
3200
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in:Cement to be use only OPC Grade 43 make - (JP, Birla,Ultra tach, ACC, JK, Shree etc.)
17.09
7124
121763.69
... More
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge. by weight (DSR-10.28) (Make Jindal Steel etc.)
13913.64
588
8194299.14
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 65mm dia
2
3394
6788.56
... More
Supplying and fixing call bell/ buzzer suitable for single phase, 230 V, complete as required.
96
78
7498.56
... More
Providing, fixing, jointing and testing, unplasticized PVC pipes -10 kg/cm2 confirming to IS : 4985 to wall, ceiling and floor, approved quality, complete,for waste water drain including jointing with rubbering/solvent/solution and airtight joints, etc. For Wash basin & Urinal 50mm dia. Pipe.(Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
95
345
32775
... More
Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required.
30
909
27291.6
... More
Supply, assembly, erection, testing and commissioning of pumping system comprising the following: WATER FILTERATION SYSTEM ALONG WITH WATER SOFTENER
CAPACITY: 5 m3/hr & 35 m3/day OBR
Pressure: 3.5 Kg/cm2 to Max 5 Kg/cm2
1
275000
275000
... More
Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 4 way Double door (4 + 12)
(Make- Havells/Philips/Legrand or equivalent)
102
3227
329235.6
... More
Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in super structure above plinth level up to floor v level in all shapes and size in:1:4 (1 cement : 4 sand)
6.71
690
4630.44
... More
Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete With 12 mm mild steel U beading . DSR 9.51.2
259.2
716
185618.3
... More
Supply of steel wire rope of 1/2" size
126
50
6300
... More
Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/m²) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c , including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. DSR-9.138 (Make JC FIRE DOOR, Metaflex Doors India, Godrej Security Solutions, Navair International, Promat India etc.)
70.56
30808
2173832.94
... More
Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. (DSR 11.37)( Make Kajaria Ceramic, Somany Ceramics, H&R, Johnson tiles, HSIL, Asian Granito India, Cera India. etc.)
1555.4
836
1300454.39
... More
Antitermite treatment of soil under floors using chemical emulsion @one litre per hole 300mm apart @100 Nos holes per 9.00 sqm including drilling 12mm diameter holes and plugging also to match the floor properly. With chlorpyriphos/Lindane EC 20% with 1% concentration.
1261.21
175
220711.75
... More
Supply of 80mm dia M.S. column pipe of class 'C' both and socketed with heavy sockets in 3/6 meter length and one end flanged complete with interlocking arrangements.
114
3000
342000
... More
Construction of granular sub-base by providing close graded Materialconforming to specifications, mixing in a mechanical mix plant at OMC,carriage of mixed material by tippers to work site, for all leads & lifts,spreading in uniform layers of specified thickness with motor grader onprepared surface and compacting with vibratory power roller to achieve thedesired density, complete as per specifications and directions of Engineerin-Charge.With material conforming to Grade-II (size range 53 mm to 0.075 mm ) having CBR Value-25 DSR 16.78.2
16.97
2129
36140.33
... More
Supplying, fixing, testing and commissioning of butterfly valve of PN 1.6 rating with bronze/gunmetal seat duly ISI marked complete with nuts, bolts, washers, gaskets conforming to IS 13095 of following sizes as required 80mm dia
7
3930
27515.6
... More
S&F of 63 Amp. DP MCB (10 KA) CAT A
(Make- Havells/Philips/Legrand or equivalent)
4
1180
4720
... More
Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. Semi rigid pipe 40 mm dia (Make Ashirvad Pipes, Astral Pipes, Prince Pipes and Fittings, Finolex, PVC Pipes, etc.)
288
88
25626.24
... More
Providing, installation, testing and commissioning of stainless steel Y-strainer fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange 150 mm dia
2
8792
17585.24
... More
Providing and fixing motorised butterfly valve with float type sensors suitable for 240 volts with working pressure rating of not less than 5 kg/cm2 with control panel and sensors to open valve when water level is low in tanks and to close when water level is high in water tanks including necessary cables, conduits, upto junction box etc. complete. 80mm dia.
1
37798
37798
... More
Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 kV grade as required. 3½ X 400 sq. mm (82mm)
24
1227
29464.32
... More
S/F of one number 8 to 6 SWG G.I. wire in 15mm dia G.I. Pipe for earthing, laid in ground or in wall duly concealed includingn the cost of cement, sand labour. T&P other material required for proper completion of the work as directed at site.
16
200
3200
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements