Rajya Krishi Utpadan Mandi Parishad Tender

Open graded Premix Carpet Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6 (13.2mm &11.20mm in 2:1) mm aggregates @0.27cum per 10 sqm either using penetration grade bitumen VG-10 @1.46kg per sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity finished to required level and grades to be followed by seal coat of type C as per Technical Specification clause 508.

Seat Coat (Type-C) Providing and laying seal coat sealing 6.7mm stone grit @0.009cum per sqm the voids in a bituminous grade VG-10 @0.65kg per sqm surface laid to the specified levels, grade and cross fall using type C as per Technical specifiacation clause 510.

Earth work in cutting or in embankment in ordinary soil excavation to be the formof regular pits not exceeding 0.5 meter (20") in depth and earth work in enbankment to be in 20cm (8") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5cm (5") lift and 30m (100'') lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30 (100") distance as directed by the E/I. (S.I. No- 253)

Providing and fixing of typical informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25 mm x 5 mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 600 mm, 600 mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, enamel paints of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (As per Banda SOR Dt. 26.04.2018 Ch- 10 Item No 10.16)

Brick edging on both side of road with S.O.B brick 8 cm (3*) wide 12 cm (4.50*) deep laid with mud mortar including all labour finished to required templete and in proper alignment and also including dressing and ramming the excavated earth including all labour, T&P sudries for proper completion of work. (S.I. No 765)

(B) Jasaw Sonwani Sampark Marg WBM Grading 3 (Top Coat) By manual means Providing, laying, spreading and compacting stone aggregates of specific sizes 53mm to 22.4mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 KN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting 7.50cm thickness to the required density Grading 3 as per Technical specification Clause 405.

Priming Coat- Providing and applying prime coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70kg/sqm using mechanical means as per technical specification clause 502.

Tack Coat- Providing and applying tack coat with bitumen VG-10 packed using distrubutor at the rate of 0.35 kg per sqm on the prepared bituminous surface cleaned with hydraulic broom as per technical specification clause 503.

Open graded Premix Carpet Providing, laying and rolling of open graded premix carpet of 20mm thickness composed of 13.2mm to 5.6 (13.2mm &11.20mm in 2:1) mm aggregates @0.27cum per 10 sqm either using penetration grade bitumen VG-10 @1.46kg per sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity finished to required level and grades to be followed by seal coat of type C as per Technical Specification clause 508.

Seat Coat (Type-C) Providing and laying seal coat sealing 6.7mm stone grit @0.009cum per sqm the voids in a bituminous grade VG-10 @0.65kg per sqm surface laid to the specified levels, grade and cross fall using type C as per Technical specifiacation clause 510.

Earth work in cutting or in embankment in ordinary soil excavation to be the formof regular pits not exceeding 0.5 meter (20") in depth and earth work in enbankment to be in 20cm (8") layers, including ramming and dressing the surface to required levels and slopes and also including 1.5cm (5") lift and 30m (100'') lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30 (100") distance as directed by the E/I. (S.I. No- 253)

Providing and fixing of typical informatory sign board as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25 mm x 5 mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos 75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 600 mm, 600 mm below ground level. All M.S. will be stove enameled on both sides. Lettering and printing arrows, enamel paints of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 (As per Banda SOR Dt. 26.04.2018 Ch- 10 Item No 10.16)