Public Works Department Tender

S/F of plain or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer Incharge. 16 sq. mm

S/F Heavy duty cadmium plated copper 4 way connector

Supply And Laying of double walled corrugated 63 mm dia 6 kgf/sqcm HDPE Pipe at a depth of 1 mtr below ground level complete excavation and back filling.complete in all respect.

Supply and burring of Safe Earthing Electrode T-19 Zn- Zinc Coated, Length 3000mm, outer pipe 48.4mm x 3.2mm, inner pipe 26.9mm x 2.6, terminal Dia 12 mm, coating 80-100 micron filled with crystalline conductive mixture (CCM) having anti corrosive & conductive property with 50 kgs activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonary housing. (From electrode terminal to switch board, cost of 25 x 3 G.I. Strip will be extra) Make: As approved in U.P. P.W.D., & C.P.R.I. Certified.

S/F of Brass Nickle plated compression gland for PVC insulated & armoured served sheathed underground cable including rubber ring etc. complete in all respect. 10 sq. mm

Supply & fixing of 12.5 mtr High mast shaft of approved make with rising system hot dip glavanized inside & out side dip,heaving pole sheet thickness 3 mm. Top dia minium 150 mm, Bottom dia 310 mm base plate 25 mm thick suitable for wind velocity as per IS 875 part 3 & having no circumferential weld, with accessories for high mast such as head frame suitable for 6 luminaries & its control gear boxes .75 HP power tool moter, 3 point suspension system with steel wire rope 8 mm dia, double drum winch, including making suitable foundation as per manufature drawing/ site reuiment along with foundation bolts nuts, washers, anchor plates etc completee in all respect.

Supply and laying of 25mm x 3mm G.I. strip from earth electrode directly in the ground as required complete in all respect.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts complete in all respects. 16 sq. mm 4 core

Supply & Erracetion of factory fabricated & wired metal clad dust and vermin proof floor mounting,M.S. Channel Base with bottom and top cable entreis Electrical control panel with TPN MCCB's (Four Pole 36 KA with thermal magnatic release)Switches Complete and instrument chamber etc.complete in all respects. The instrument chamber shall be separate and shall comprise of flush type digital metering system for phase to phase voltage and single phase voltage, current and other parameters (KVA,P.F,KW etc) in each phase with touch type selector switches for different readings, instrument fuses, current transformer etc. The panel board shall have suitable capacity electrolytic alumininum busbars as per IS8623 or above istulated with heat shrink sleeving and mounted on non hygroscopic supports such as CMC/BMC support with deteachable side covers and shall be suitable for extension on the sides. The MCCB's shall be complete with suitable cable end boxes, compression glands and indicating lamp on incoming etc.The Job includes the grounting of the board as perdirections of Engineer-in charge. All out goings of 100 Amp and above shall have an Ammeter. The panel board shall be fabricated with CRCA sheet with a minimum thickness of 1.6mm/2mm. Cubicle type switch board shall be of cat A & B Only. Incoming 100 Amp MCCB -1Nos & Outgoing 32 Amp MCCB -3 Nos complete in all respect Cat B

Supply and fixing of factory wired integral LED flood light luminaires with die cast aluminium housing built with dirver set suitable for 140 to 150 Watt. Confirming to IP 66 protection complete in all respect. CAT-AAA

S/F of plain or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the Engineer Incharge. 10 sq. mm

S/F Anticlimbing Device.complete in all respect.

S/F of Brass Nickle plated compression gland for PVC insulated & armoured served sheathed underground cable including rubber ring etc. complete in all respect. 16 sq. mm

S/F 6 Amp to 32 A DP. M.C.B. Cat A

S/F of Danger Board fabricated from 10 gauge M.S. Sheet as per I.E. Rules

Supply & fixing of 7 mtr GI Octagonal Pole of approved make (top dia 70 mm, Bottom dia 130 mm and base plate 12mm thick) having 3 mm thikness with Single arm bracket 1 Mtr length in 1:2:4 RCC foundation bolt including the cost of foundation, excavation & back filling and Required T&P complete in all respect.

Numbering of Pole by Letter Writing with paint with reflecting tape.as directed by engineer in charge.

Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 volts complete in all respects. 10 sq. mm 4 core

S/W of submain with 2 Nos. 2.5 Sqmm and with one nos. 1.5 Sqmm earthwire complete in all respects