Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Road Safety Work On The Jhansi-mawai Gird Road Other District Road Under The Zero Fatality District Scheme in Jhansi, Uttar Pradesh, with an estimated contract value of Rs. 83,08,000. The bid opening date for this tender is 06-11-2026 and the last date for bid submission is 18-11-2026. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender - UP Tender
Opening Date6 Nov 2026
Closing Soon18 Nov 2026
Tender Amount₹ 83,08,000 This is an estimated amount, exact amount may vary.
Costs
EMD
₹ 1,24,000Document Cost
₹ 860Tender Fee
Refer Documents
Description
Road Safety Work On The Jhansi-mawai Gird Road Other District Road Under The Zero Fatality District Scheme
Contact
Tender Id
2026_CEJNS_1205637_2Tender No
1698 / 18A / 2026-27 Dated. 28.10.2026Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://uppwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
(Repeated/ Tranvers bar)
Road Marking with Hot Applied Thermoplastic Campound with Rflectorising Glass Beads on Butminous Surface. Providing and laying of hot applied thermoplastic compound 5 mm thick including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC-35-2015 The finished surface to be level, uniform and free from streaks and holes. (As per LKO SOR SI No-3, P-54)
573.75
1236
709155
... More
Retro-reflectorised Traffic sign as per IRC-67-2012
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67-2012 made of high intensity grade sheeting type-IV vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate fo having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner remova, adhesion, impact resistance, specular floss adn fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International / Government Laboratory/Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should be obtained from Indian conditon within 3 years of launching of product by the manufacture in abroad, Alternatively, a certificate conforming to ASTM specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer/Client, if so dedires, could seek for a performance guarentee which be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67-2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. Proof of the same in form of government report shall be uploaded while quoting tender. (As per LKO SOR SI No-18, P-57)
i) 60 cm equilateral tringle with diffinitation plate size (20cm X 60cm) T-Section
11
3343
36773
... More
iii) 60 cm Circular with diffinitation plate (20cm X 60cm) Speed limit
11
3818
41998
... More
iv) 80mmx60mm rectangular with diffinitation plate
11
4555
50105
... More
vii) 90 cm high octagon Stop Sign
11
4824
53064
... More
viii) 50x60 cm single chevron
11
3433
37763
... More
x) 30X90 cm (Left/Right) Object Hazard
11
3321
36531

