Public Works Department Tender

Removing white or colour wash by scrapping,sand papering & preparing the surface smooth including necessary repairs to scratches etc. complete.As per DSR13.88 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & applying white cement based putty of average thickness 1 mm, of approved brand & manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.As Per DSR 13.80. Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over & including priming coat of exterior primer applied @ 2.20 kg/10 sqm.As Per DSR 13.48.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Painting with synthetic enamel paint of approved brand & manufacture to give an even shade.Two or more coats on new work.As per DSR 13.62.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing panelled or panelled & glazed shutters for doors,windows & clerestory windows, fixing with butt hinges of required size with necessary screws,excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge.30 mm thick shutters.As Per DSR 9.27.2.1.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under,including cutting the patch in proper shape,raking out joints preparing & plastering the surface of the walls complete ,including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.As per DSR14.1.2 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & laying Ceramic glazed floor tiles of approved Make size 300x300 mm(thickness to be specified by the manufacturer),of 1st quality conforming to IS:15622,of approved make,in all colours,shades,except White,Ivory,Grey,Fume Red Brown,laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement & matching pigments etc,complete.As Per DSR11.38 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & laying Vitrified floor tiles of approved Make size 600x600 mm(thickness to be specified by the manufacturer),of 1st quality conforming to IS:15622,of approved make,in all colours,shades, except White,Ivory,Grey,Fume Red Brown,laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand),jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement & matching pigments etc, complete.As Per DSR11.37 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete.12 mm thick. As Per DSR 9.158.1. Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete125mm.As Per DSR9.165.1. Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing approved brand & manufacture SS 304 grade Tower Bolt 150mm long with 10mm dia fixd with SS screws etc.complete in all respect as per manufacturer specifications and as directed by Engineer in Charge.As Per DSR 0701. Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing bright finished brass hanging type floor door stopper with necessary screws,etc . complete. As per DSR9.82. Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & laying APP (Atactic Polypropylene Polymer) modified prefabricated five layer,3 mm thick water proofing membrane,black finished reinforced with glass fibre matt consisting of a coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufactured of density at 25°C, 0.87 - 0.89 kg/litre & viscocity 70 - 160 cps. Over the primer coat the layer of membrane shall be laid using butan456e torch & sealing all joints etc.& preparing the surface complete.The vital physical & chemical 5parameters of the membrane shall be as under:Joint strength in longitudinal & transverse direction at 23°C as 350/300 N/5 cm.Tear strength in longitudinal & transverse direction as 60/80N. Softening point of membrane not less than 150°C. Cold flexibility shall be upto -2°C when tested in accordance with ASTM, D - 5147.The laying of membrane shall be got done through the authorise dapplicator of the manufacturer of membrane.As per DSR 14.90 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part Iand laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed withthe face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.DSR 12.52.4 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and fixing pressed steel door frames conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and if required angle threshold of mild steel angle of section 50x25 mm, or base ties of 1.60 mm, pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and shock absorbers as specified and applying a coat of approved steel primer after pre-treatment of the surface as directed by Engineer-in-charge:Fixing with adjustable lugs with split end tail to each jamb. Profile -B as Per DSR 10.14.1.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings.This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge.As per DSR 18.9.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing C.P. brass long body bib cock of approved quality confirming to ISI standards of approved make & weighing not less than 690gm. 15mm nominal bore .As per DSR 18.51.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing C.P. brass angle valve for basin mixer and geyser points of approved quality confirming to IS:8931 of approved make.15 mm nominal bore.As per DSR18.53 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required :As per DSR17.2.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm and 340x410x265 mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required.As per DSR17.4.1 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:-White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer.As per DSR17.7A Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing & fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete of approved make.As per DSR 17.28.2 Including cost of all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.