Public Works Department Tender
... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Road Safety Work On Sirsaganj Kishani Bidhuna Road (sh-103) At Bidhuna Ramgadh Dibiyapur Nauganwa Chauraha. in Auraiya, Uttar Pradesh, with an estimated contract value of Rs. 2,27,000. The bid opening date for this tender is 16-11-2026 and the last date for bid submission is 19-11-2026. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Public Works Department - PWD Tender - UP Tender
Opening Date16 Nov 2026
Closing Soon19 Nov 2026
Tender Amount₹ 2,27,000
Costs
EMD
₹ 25,000Document Cost
₹ 856Tender Fee
Refer Documents
Description
Road Safety Work On Sirsaganj Kishani Bidhuna Road (sh-103) At Bidhuna Ramgadh Dibiyapur Nauganwa Chauraha.
Contact
Tender Id
2026_CEKNP_1206055_12Tender No
89camp/8A/2026 DATE 09-10-2026Tender Authority
Public Works Department ViewPurchaser Address
-Website
http://uppwd.gov.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. As per S.O.R. 1 Ch. Trafic Sign.
79.65
600
47790
... More
Provding & Laying of hot applied thermoplastic compound 5 mm thick including relectorising glass beads @ 500 gms per sqm ares. Thickness of 5mm is exclusive of surface applied glass beads as per IRC : 35-2015 The finished surface to be level, uniform and free from streaks and holes.
21
800
16800
... More
Supply and fixing of relective raised pavement marker with its body surface made of tough ASA (Acrylic styrene Acrylontrite) of HIPS (Hi impact Polystyrene) of acrylonitrile butadiens styrenc (ABS). The marher shall supported a load of 1355 kg tested in accordance with ASTMD 4280 and its reflective panels shall consist of number of lenses containing single or dual prismatic cubes of providing total internal reflection of the light entering the lens face. Retro reflecting surface shall preferably be 35 + 50 to base and ares of each retro- reflecting surface shall not be less than 13.0 sqcm road studs shall be legibly marked with name trade mark or other means of identification of the manufacturer. Dimensions of road studs should not be less than 100mmx100mmx10mm RPM (with shank) as per ASTM
33
300
9900
... More
Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC : 67-2012 made of high intensity greade sheeting wide clause 801.3 friced over aluminium sheeting Type-IV 1.5mm thick supprorted on a mild steel angle iron post 75mmx75mmx6mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45cm x 45cm x 60cm, 60cm below ground level as per approved drawing. The retro-reflective sheeting shall be tested for 3 year outdoor weathering test in Indian condition as per IRC 67-2012 & proof of the same in form of government report shall be uploaded while quoting tender.
(7.1) 60 cm equlateral tringle with diffnitation plate size (20cm x 60cm)
3
3000
9000
... More
60 cm Circular with diffnitation plate (20cm x60cm)
3
3800
11400
... More
80 x 60 mm Rectangular with diffnitation plate(20cm x60cm)
3
4500
13500
... More
60mm x 45mm mm Rectangular with diffnitation plate (20cm x60cm)
11
3500
38500
... More
60cm x 60 cm square with diffinition plate (20cm x 60cm)
3
4100
12300
... More
90cm high octagon
2
4800
9600
... More
Providing and erecting direction and place identification retro- reflectorised sign as per IRC :67 made of high intensity grade sheeting. The retor reflective sheeting tyep-IV shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC-67:2012 & proof of same in form of government report shall be uploaded while quoting tender. vide clause 801.3, fixed over aluminium sheeting, 2 mm thick with area exceeding 0.9 sqm supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm, firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
2.16
6200
13392
... More
Providing and fixing of Standard Metal Delineator as per IRC 79-2019 of minimum retro reflective unit exposed area of 330 square cm in white color, full cube corner micro prismatic non-metalic retro reflective sheeting on each side conforming with IRC 67-2012 and meeting the coefficient of retro reflection values as per ASTM D minimum 40 microns thickness. The delineator shall be painted with powder coat of pasted on both sides. The structure shall be manufactured in roll forming process and shall have height not less than 800 mm above the ground width not less than 100 mm and shall extend not more than 300mm below the ground while being installed. The front and back faces of te delineator should be curved with a radius of not more than 200mm and with delta angle (or central angle of curve) lying between 20 degree and 30 degree to increase the visibility of the delineator for veghicles moving in continuous curves, The delineator shall have grooves across the length to mage the reflective sheets vandal-proof) The retor reflective sheeting shall be tested for 3 year outdoor weathering test in Indian conditions as per IRC 67-2012 & Proof of the same in form of government report shall be uploaded which quoting tender. If somehow tendor pre qualification condition do not ask for government report then the report shall be submitted to engineer-in-charge before finalization of bill. The delineator is meant for application on gaps in median traffic islands, dangerous bends, roundabouts, narrow bridges etc. of as desired by site engineer.
20
800
16000

