Public Works Department Tender

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M lift and 30 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M distance as directed by the engineer in charge. with 1 km cartage SOR No-253(a) iincluding cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Cement Concrete with 4 cm gauge approved stone ballast, coarse sand & cement in the proportion of 8:4:1 including supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Supplying, fitting and placing with HYSD bar reinforcement (Fe 415) in substructrue complete as per drawings and technical specification Clauses 1002, 1005, 1010 & 1202 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Plain/reinforced cement concrete (M20) in substructure complete as per drawings and technical specification Clauses 802, 804, 805, 806, 807, 1202 and 1204 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Construction of granular sub-base by providing close graded grading-1 material By Mix in place Mathod, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with front end loader at OMC, and compacting with vibratory roller to achieve the desired density, complete as per MORTH specification clause 401 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Providing, laying, spreading and compacting stone aggregates of specific sizes 22.4-53mm to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applaying and brooming crushable screening to fill up the interstices of course aggregates, watering and compacting to the required to the density grading 3 As per technical specification clause 405.3 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.

Construciton of un - reinforced plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade (O.P.C.) cement or any other type as per Clause 1501.2.2 M 30 Grade (1:1.5:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel, laying and fixing, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, dowel bars, near approaches to bridge/culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14 days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Polythene sheet and dowel bar and also including complete shifting of materials & Concrete etc including cost of material, labour, Tools & Plants, labour cess, royality and all taxes etc. but excluding cost of GST as required for propor complition of the work directed by Engineer in charge as per20.14(a) New item

Providing and Laying of I shaped grey colour Interlocking tiles rubber moulded 80mm thick precast cement concrete having plan dimension 200 x (160+120mm) with compressive strength not be less than 30 Mpa (M-30) and weight 5kg per no. specification to IS:15658-2006 as per drawings and Technical Specification Clause 1504 including cost of, all material, labour, T&P, royality, Labour cess, all taxes complete. But excluding GST.