Public Works Department Tender

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in uniform layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and applying tack coat with VG-10 bitumen using bitumen pressure distributor at the rate of 0.25 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. MORT&H Specification 503 . Including cost of bitumen, cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I and As per MoRT&H

Providing and laying dense graded bituminous macadam Grading 2 with higher capacity batch type HMP using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 per cent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 505 complete in all respects. Including cost of bitumen, cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I and As per MoRT&H

Providing and laying bituminous concrete with higher capacity batch type hot mix plant using crushed aggregates of specified grading, premixed with VG-30 bituminous binder @ 5.4 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 507 complete in all respects. Including cost of bitumen, cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I and As per MoRT&H

Construction of dry lean cement concrete Sub- base over a prepared sub-grade with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, optimum moisture content to be determined during trial length construction, concrete strength not to be less than 10 Mpa at 7 days, mixed in a batching plant, transported to site, laid with a paver with electronic sensor, compacting with 8-10 tonnes vibratory roller, finishing and curing. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Construction of un-reinforced, expansion and construction joint only, plain cement concrete pavement, thickness as per disign, over a prepared sub base with 43 grade cement or any other type as per Clause 1501.2.2 (Grade)(1:1½:3) coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints as per norms, applying debonding strips primer, sealant, near approaches to bridge/ culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14-days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I SOR 2014 (b).

Dismantling of cement concrete pavement by mechanical means using pneumatic tools, breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials up to a lead of 1000 metres, stacking serviceable and unserviceable materials separately. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Dismantling of existing structures like culverts, bridges, retaining walls and other structures comprising of brick masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specification.Sr No. 2.6 Ref No.202. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Excavation for Structures :- Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material. and add dewatering 20% As per Morth. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15. Including supply of all material, labour, T&P all taxes royalty,labour cess etc. required for proper completion of work. Morth Item No. 12.08 (A) Case -II. Excluding GST as per direction of E/I

Plain/Reinforced cement concrete (M20) with 2 Cm gauge approved Stone grite, coarse sand and cement in open foundation complete as per drawing and technical specifications including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I .Morth Item No. 13.05(A) (P)

RCC (M 25) in R/wall raft & Box raft, Approch slab with with 2cm cement, approved coarse sand & 2 cm gauge approved stone grite (excIuding suppIy of reinforcement and its bending, but incIuding its fixing and binding the same with 24 B.W.G.G.I. binding wire) and incIuding necessary centering and shuttering etc. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I . Morth Item No. 3.05 F (P)

Supplying, fitting and placing HYSD (Fe-500) bar reinforcement in sub-structure complete as per drawing and Technical Specifications as per Section 1600 & 2200 Morth Item No. 15.13. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and laying Cement concrete wearing coat M-30 grade including reinforcement complete as per drawing and Technical Specifications Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I. Morth Item No. 14.04

Back filling behind abutment, wing wall and return wall complete as per drawing and Technical Specification as per drawing and Technical Specification.710.1.4.of IRC:78 & 2200 Morth Item No. 15.23. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Supply and fixing of 1000 mm dia NP3 type Hume Pipe S&S in position including labour and T&P etc. required for proper completion of work. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes..but IIncluding cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I . S.I No. 22.02 New Item

Providing and laying of hot applied thermoplastic compound 5 mm thick for repeated bar marking including reflectorising glass beads @ 500 gms per sqm area, thickness of 5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes.but Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I .. For Repeated bar .S.I No. 22.03 New Item

Retro-reflectorised Traffic sign as per IRC-67 2012 Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC :67-2012 made of high intensity grade sheeting type-V vide clause 801.3, fixed over aluminium sheeting 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing. The Retro reflective sheeting shall be tested for a certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory/ Institute by the manufacturer of the sheeting and in case the certificate is obtained from international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D 4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012. Legends, letters, numerals and borders etc should be as per MoRTH specification No-801.3.7. P xi) ii. 60 cm equllateral triangle with diffinitation plate (20cmx60cm) SI. No. 22.21. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Reflective raised pavement marker providing and Fixing of raised pavement marker (cat eye) type x-ASTMD -4956-04 avery dennision /3M (USA MAKE)having Moulded body of polycarbonate, ASA HIPS or ABS able to support a load of 13.635 MT tested in accordance with ASTMD 4280 type H and other requirements mentioned in MORT& H circular its reflective lens made of micro prismetic lens(capable of providing total internal reflection of light),electronically welded to the body the length , height and width of the body shall not exceed 130 mm, 20 mm and 105mm respectively, the area of each reflected surface shall not be less than 13 sqcm on each side stopping at the angle of 35+/-5 degree to the base to ensure maximum reflectively , it shall comply to specification of catagory A MORTH circular No. RW/NH/33023/10-97-DO III dt. 11.06.1997. lenses shall be moulded of methyl methecrylate confirming to ASTMD 788 or equvalent with 7 years warranty, S.I No. 22.06 New Item. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Providing and fixing of 30 cm X90 cm Rectangular Hazard Marker retro-reflectorised sign as per IRC:67 mad of high intensity grade sheeting vide clause 801.3, fixed cover aluminium shting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x75 mm x6 mm firmly fixed to th ground by means of properly dsignd foundation with M-15 grade cement conc. 45 cm x 45 cm x 60 cm, 60 cm below ground lvel as per approved drawing (as per IRC:67-2012 clause 14.60 S.I No. 22.29 New Item. Including cartage, material, T&P, Machinary, royalty, labour cess all taxes complete. Excluding GST as per direction of E/I

Supply & Fixing of M S Delineator made of Mild steel with pure polyester powder coating with the minimum thickness of powder coating of not less than 40 micron for protection against corrosion. The surface should be conceated so that there should not be any exposed surface without powder coating. Alternatively, these metal guide poles can beconcealed with thermoplastic body. The posts shall have Ian ellipsoidal or circular design with the height of the pole shall be 800 to 900 mmabove the ground with about 200 to 300 mm base which can be anchored onto the ground. Mild steeI Guide Poles shall conform to Type XI sheeting specifications as per IRC:67 and ASTM D4956 which would ensure to obtainI clear visibility of the road alignment during night time. The Retro reflective sheeting shall be tested for A certificate of having the sheeting tested for coefficient of retro reflection, daytime colour and luminance, shrinkage, flexibility, liner removal, adhesion, impact resistance, specular gloss and fungus resistance, 3 years outdoor weathering and its having passed these tests shall be obtained from International/Government Laboratory / Institute by the manufacturer of the sheeting and in case the certificate is obtainedfrom international condition, it should also be obtained from Indian condition within 3 years of launching of product by the manufacture in abroad. Alternatively, a certificate conforming to ASTM Specification (D4956-09) on artificial accelerated weathering requirements from a reputed laboratory in India can be accepted provisionally. In such a situation, the Employer / Client, if so desires, could seek for a performance guarantee which would be released after receipt of certificate meeting the requirement of three years outdoor weathering of the sheeting as per IRC 67:2012 & Proof of the same Report shall be uploaded which quoting tender. The rate shall include all materials, labour, T&P, transportation, installation and incidentals all complete as per direction of the Engineer-in-Charg S.I No. 22.01 New Item