Public Works Department Tender

Approach for Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Gradeing-3 as per Technical Specification Clause 405 including all taxes, labour cess, but excluding GST

Approach for Brick edging on both side of road with first class brick 8 cm wide and 12 cm deep laid with mud mortar including all materials, labour T&P etc. complete. including all taxes, labour cess, but excluding GST

Approach for Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per Technical specification Clause 502 including all taxes, labour cess, but excluding GST

Approach for Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with hydrolic broom as per temechanical specificatiob clause 503. including all taxes, labour cess, but excluding GST

Approach for Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emuslion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of Type 'C' as per Tehnical Specification Clause 508 including all taxes, labour cess, but excluding GST

Approach for Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels , grade and cross fall using Type'C' as per Technical Specification Clause 510 including all taxes, labour cess, but excluding GST

Additional Approach for Earth work in cutting or in embankment in ordinary soil excavation to be the form of regular pits not exceeding ½ meter (20”) in depth and earth work in enbankment to be in 20cm (8”) layers, including ramming and dressing the surface to required levels and slopes and also including 1.5m (5”) lift and 30m (100’) lead. The earth form cutting to be used in making embankent or to be deposited as spoil banks within 30m (100’) distance as directed by the E/I. including all taxes, labour cess, but excluding GST

Additional Approach for Construction of granular Sub-base by providing well graded material , spreading in uniform layers with motor grader on prepared surface mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as perTechincal Specification clause 401 including all taxes, labour cess, but excluding GST

Additional Approach for Providing, laying, spreading and compacting stone aggregates of specific sizes (45-63 mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Grading-2 as per Technical specification Clause 405 including all taxes, labour cess, but excluding GST

Additional Approach for Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Gradeing-3 as per Technical Specification Clause 405 including all taxes, labour cess, but excluding GST

Additional Approach for Brick edging on both side of road with first class brick 8 cm wide and 12 cm deep laid with mud mortar including all materials, labour T&P etc. complete. including all taxes, labour cess, but excluding GST

Additional Approach for Providing and applying primer coat with bitumen emulsion(SS-1) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg per sqm using mechanical means as per Technical specification Clause 502 including all taxes, labour cess, but excluding GST

Additional Approach for Providing and applying tack coat with bitumen using pressure distributor at the rate of 0.30 kg per sqm on the prepared non bituminous surface cleaned with hydrolic broom as per temechanical specificatiob clause 503. including all taxes, labour cess, but excluding GST

Additional Approach for Providing, Laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emuslion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 KN static roller capacity, finished to required level and grades to be followed by seal coat of Type 'C' as per Tehnical Specification Clause 508 including all taxes, labour cess, but excluding GST

Additional Approach for Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels , grade and cross fall using Type'C' as per Technical Specification Clause 510 including all taxes, labour cess, but excluding GST

Additional Approach for Providing, laying, spreading and compacting stone aggregates of specific sizes (22.4-53mm) to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. WBM Gradeing-3 as per Technical Specification Clause 405 including all taxes, labour cess, but excluding GST

Additional Approach for Construction of joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS:383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 14-days, using curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 including all taxes, labour cess, but excluding GST

Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete. SI no-251 including all taxes, labour cess, but excluding GST

Additional Approach for Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. SI No- 281 including all taxes, labour cess, but excluding GST

Additional Approach for R.C.C. work with cement approved coarse sand and 2cm Gauge approved stone ballast in the proportion of 1:2:4 in lintels of doors and windows, excluding its fixing and binding the same with 24B.W.G.G.I binding wire and including necessary centering and shuttering etc. and also including S/o all materials required for proper completion of the work. Binding wire to be supplied by the contractor free of cost.as SI No- 283 including all taxes, labour cess, but excluding GST

Additional Approach for Mild steel or Tor iron in work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. as S.I. No. 504 including all taxes, labour cess, but excluding GST

Additional Approach for Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m. from the foundation trenches including all T&P phowarah and basket etc. complete. SI No-251 including all taxes, labour cess, but excluding GST

Additional Approach for Sand filling in plinth including supply of necessary quantity of sand from a distance not exceeding 8km from the site of work and including watering dressing etc. Rate to include cost of all materials, labour and T&P etc. required for proper completion of the work. SI No-255 including all taxes, labour cess, but excluding GST

Additional Approach for Concrete with 4cm. gauge brick ballast, sand of 1.25 F.M. and cement in proportion of 8:4:1 in foundation and under floors including supply of all materials labour and tools and plants etc. required for proper completion for the work. SI No-275 including all taxes, labour cess, but excluding GST

Additional Approach for M-150 brick work in 1:4 cement and sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants. ect. required for proper completion of work. SI No-305 including all taxes, labour cess, but excluding GST

Additional Approach for Struck pointing with cement mortar consisting 1 part cement and 2 parts of sand of 1.25 fineness modulus including supply of all materials labour and T&P etc. required for proper completion of the work.. SI No-574 including all taxes, labour cess, but excluding GST

Additional Approach for RCC Hume Pipes 600 mm NP-3 inculidng collars/ spigot jointed with stiff mixture of cement in the proportion of 1:2 (1 cement : 2 find sand) including testing of joints. including all taxes, labour cess, but excluding GST

Additional Approach for Cement concrete with 2cm. gauge approved stone ballast, approve coarse sand and cement in the proportion of 4:2:1 including supply of all materials, labour and T&P etc. required for proper completion of the work.t as SI No-279b including all taxes, labour cess, but excluding GST

Additional Approach for Colour washing two coat using approved coloring material of buff, blue gray or brown shade including supply of all materials labour T&P etc. required for proper completion of the work. as SI No-675 including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Plain cement concrete 1:3:6 mix with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for RCC Grade M 30 Furnishing and Placing Reinforced/ Prestressed cement concrete in super-structure as per drawing and Technical Specification including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Mild steel or Tor iron in work such as in reinforced concreted or reinforced brick work (when not included in overall rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage. Bend hooks and authorized overlapping shall be measured. as S.I. No. 504 including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for PCC Grade M15 Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Brick masonry work in 1:3 in sub-structure complete excluding pointing and plastering, as per drawing and Technical Specifications including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Running of 5HP pump for dewatering including arrangement of pump suction and delivery pipes and other accessories at site including cost of POL including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Providing and laying Filter material underneath pitching in slopes complete as per drawing and Technical specification including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) forProviding and laying Pitching on slopes laid over prepared filter media including boulder apron laid dry in front of toe of embankment complete as per drawing and Technical specifications including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Sand Filling in Foundation Trenches as per Drawing & Technical Specification including all taxes, labour cess, but excluding GST

Box Culvert (5 cell x 6 m span x 5 m H) for Providing 110mm dia PVC pipe weep holes as per direction of E/I. As per Schedule Page No-17(Item No-28)