Public Works Department Tender

... More
The PWD has issued a formal invitation for competitive bids for the Public Works Department project, for Special Repair Work Of Vrindavan Parikrima Road In District Mathura in Mathura, Uttar Pradesh, with an estimated contract value of Rs. 2,20,00,000. The bid opening date for this tender is 18-01-2025 and the last date for bid submission is 27-01-2025. Interested bidders for Public Works Department tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

Public Works Department - PWD Tender

Works
Civil And Construction
Road Construction
Eprocure
Opening Date18 Jan 2025
Closing DateCancelled
Tender Amount₹ 2,20,00,000 
Notes
Download

Costs

Summary

Special Repair Work Of Vrindavan Parikrima Road In District Mathura

Description

Unlock the Tender details for free
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user

Contact

Unlock the Tender details for free
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

View all details for FREE
... More
Note - 1-Rates are inclusive of all taxes but excluding GST which shall be paid extra as applicable 2-Labour cess @ 1% will be deducted from contractor's bill at the time of payment 3-Bitumen/ Emulsion will be issued to the contractor as per Schedule "C"

-

-

-

... More
Construction of Granular Sub Base by Providing Granular Material, spreading in uniform layers with Motor Grader on prepared surface, mixing by mix in placed method with Froont & Loader at OMC and compacting with Vibratory Roller to achieve the desired density, complete as per clause 401

220

3100

682000

... More
Dismantlling Interlocking tiles tiles work in floors/Roads laid in dry sand including stacking with 50 metre lead for thickness of tile 60mm to 80mm as per SI.No.-22, Ch.No.-17

700

65

45500

... More
Relaying of I Shape old interlocking tiles including labour local sand T&P etc. complete but excluding cost of tiles (excluding cost of Interlocking tiles)

200

150

30000

... More
Providing & applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.25Kg./Sqm. on the prepared primed granular/old painted surface, cleaned with air compressor, including all Taxes, Material, Labour, T&P etc required for proper completion of the work. (For Bitumenous Surface).

43400

12

542500

... More
Providing and laying 25 mm thick mastic asphalt wearing course with paving grade bitumen meeting the requirements given in table 500-29, prepared by using mastic cooker and laid to required level and slope after cleaning the surface, including providing antiskid surface with bitumen precoated finegrained hard stone chipping of 13.2 mm nominal size at the rate of 0.005cum per 10 sqm and at an approximate spacing of 10 cm center to center in both directions, pressed into surface when the temperature of surfaces is not less than 1000C, protruding 1mm to 4mm over mastic surface, all complete as per clause 516.

3580

755

2702900

... More
Construction of un-reinforced, dowel jointed, plain cement concrete pavement over a prepared sub base with approve grade cement @ 400 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing.

290

8850

2566500

... More
DENSE GRADED BITUMINOUS MACADAM Grading-II Providing and laying Dense Graded Bituminous Macadam with higher capacity batch type Hot Mix plant using crushed aggregates of specified grading, premixed with bituminous binder @ 4.50% by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth Wheeled vibratory & Tandom Rollars to acheive the desired compaction as per MORT&H Specifications clause 505 Complete in all respects.

82.5

10000

825000

... More
Supply & Laying of I shaped (Zigzag) precast Interlocking tiles of thickness 60 to 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 0.30mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand all complete work. (100mm Rubber molded coloured) as per SI.No.-17, Ch.No.-20

500

1030

515000

... More
Providing & applying Tack Coat with bitumen VG-10 using bitumen pressure distributor at the rate of 0.30Kg./Sqm. on the prepared primed granular/old painted surface, cleaned with air compressor, including all Taxes, Material, Labour, T&P etc required for proper completion of the work. (For Bitumenous Surface).

3580

15

53700



Evaluation Notes How It Works ?

Potential Partner

Select Your Requirements
Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.