Public Works Department Tender

Construciton of un - reinforceddowel jointed at expension and contstructon joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base with 43 grade (O.P.C.) cement or any other type as per Clause 1501.2.2 M 30 Grade coarse and fine aggregates confirming to IS 383 maximum size of coarse aggregate not exceeding 25 mm mixed in a concrete mixer of not less then 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed side from work (steel channel, laying and fixing of 125 microan thick polythene film , wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints , applying debonding strips primer, sealant, dowel bars, near approaches to bridge/culvert and construction, joints, admixtures as approved, curing of concrete slabs for 14 days, curing compound (Where specified) and water finishing to lines and grade as per drawing and Technical Specification without dowel bar as per direction of E/I including cost of all material, labour, T&P and all other taxes as applicable but excluding cost of GST.

Providing and laying seal coat by manual means with VG-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per Technical Specification Clause 510 as per direction of E/I including cost of all material, labour, royalty, T&P and all other taxes as applicable but excluding cost of GST.

Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50 M in depth and earth work in embankment to be in 20 cm. layers including remming and dressing the surface to required levels and slopes and also including 1.50 M lift and 30 M lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks with in 30 M distance as per direction of E/I including cost of all material, labour, T&P and all other taxes as applicable but excluding cost of GST.