North Eastern Railway Tender
... More
The NER has issued a formal invitation for competitive bids for the North Eastern Railway project, for Electrical Work In Connection With Sej Renewal.173 No. Glued Joint Renewal-1346 No.removal Of Dfw (o&r)-2724 Construction Of Gang Hut, Provision Of Wheel Lathe And Other Machines At New Coaching Depot Gkp & Provision Of 10 Beded Rpf Barrack At Kld. in Sant Kabir Nagar, Uttar Pradesh, with an estimated contract value of Rs. 2,18,70,942. The bid opening date for this tender is 26-05-2025 and the last date for bid submission is 02-07-2025. Interested bidders for North Eastern Railway tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
North Eastern Railway - NER Tender
Energy, Oil and Gas
Ireps
Opening Date26 May 2025
Closing Date2 Jul 2025
Tender Amount₹ 2,18,70,942.65
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
A Class
Bid Capacity
... View More
The formula for bid capacity is V/N or 'V' whichever is less; where V = Advertised value of the tender in crores of Rupees, N = Number of years prescribed for completion of work for which bids have been invited.
Technical Capacity
... View More
The required prior work experience for the bidder includes successfully completing or substantially completing specific similar works within the last 07 years. The similar works can be any of the following: - Three similar works costing not less than 30% of the advertised value of the tender, - Two similar works costing not less than 40% of the advertised value of the tender, - One similar work costing not less than 60% of the advertised value of the tender. The bidder should submit documents testifying to their previous experience, including certificates and testimonials regarding contracting experience for the type of job for which the tender is invited, along with a list of works carried out in the past. The value of similar works is related to the advertised value of the tender, with specific percentages mentioned: 30%, 40%, and 60%. The bidder should also have a minimum average annual contractual turnover, calculated based on the total contractual payments received in the previous three financial years, with a specific formula for tenders above 50 lac: V/N or 'V' whichever is less, where V is the advertised value of the tender in crores of Rupees and N is the number of years prescribed for completion of work.
Costs
EMD
₹ 2,59,400Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Electrical Work In Connection With Sej Renewal.173 No. Glued Joint Renewal-1346 No.removal Of Dfw (o&r)-2724 Construction Of Gang Hut, Provision Of Wheel Lathe And Other Machines At New Coaching Depot Gkp & Provision Of 10 Beded Rpf Barrack At Kld.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
SRDEE-LJN-11-2025-LUCKNOW-NER-DIVISION-ELECTRICAL/NORTH EASTERN RLYTender No
SRDEE-LJN-11-2025Tender Authority
North Eastern Railway ViewPurchaser Address
-Website
http://ireps.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Supply of Double wall corrugated (DWC) pipes for under ground power cable 54 protection with IS:14930 Part - II mark on duly printed at every one meter interval along with the socket coupler with IP 67 protecting for coupling where ever required. The DWC pipe shall be rodent proof and fire resistant and size of outer dia 90 mm and inner dia 76 mm.
100
201
20139
... More
Supply and fixing of cable route marker made with stone as per drawing attached.
-
-
71
... More
Supply of 100-120 watt LED High Bay Light Fitting, LED Beam Angle 120 Digree operating voltage 230 volt AC 50 HZ, Colour temperature-6000 +/- 500 K .The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
48
11564
555072
... More
Supply and recessing/fixing on surface of 6 SWG GI wire conforming to IS: 280/2006 (Latest Version) for loop earthing as required for earthing of installation as per IE Rule.
780
8
6926.4
... More
Supply and Testing of 3-5/6 Digits 6000 Counts 1000A AC/DC, DC+AC TRMS Digital Clamp meter with VFD, EF Detection, AMP Tip for Low Current Measurement Function.
2
18791
37583
... More
Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 5/3 Pin 16/20A complete in all respect.
119
169
20114.57
... More
Supply and Erection of Modular type switch blanking set to fill the blank space White finished mounting cover plate complete in all respect.
233
8
2022.44
... More
Supply, Erection, Testing and Commissioning of following Modular type Socket with MCB 25 Amps for AC Unit complete in all respect.
4
217
869.12
... More
Supply of PVC insulated multi stranded copper conductor single core HRFR cable 1.5 11 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for Earth Wire as required as per technical specification including connections, testing and commissioning.
11500
14
166980
... More
Supply and installation of Maintenance free chemical Gel Earthing with copper bonded 58 steel Rod of 3 Meter Long 17 mm dia copper bonding thickness 250 microns along with SS Clamp and 50 Kg of TERRAGRIP grounding Minerals with Polyplastic earth pit chamber size top dia 254 mm. Bottom dia 330 mm and 260 mm height.
10
15340
153400
... More
Supply and Installation of Ceiling rose 3 plate as per IS No. 371/1999 (Latest Version) including connections, Testing and commissioning as per Tech. Specification.
1080
16
17992.8
... More
Supply and Fixing of Hot Dip galvanized perforated type cable tray 100 mm width and 50 mm height made with 14 SWG Sheet.
450
454
204709.5
... More
Supply and making outdoor end termination with heat shrinkable jointing kit 62 conforming to IS: 13573/1992 (Latest version) complete with all accessories including aluminium lugs suitable for 3 core 120 Sq. mm HT XLPE aluminium conductor cable of 11 KV (Earthed) grade complete in all respect as required.
6
9626
57760.56
... More
Supply of PVC insulated multi stranded copper conductor single core HRFR cable 4.0 7 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning. The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
18000
33
608760
... More
Fabrication and Supply of Ceiling Fan Down Rod 3 feet long fabricated by 12 mm mild steel pipe duly painted with clamp, Fastners, Insulator and split pin complete in all respect
156
88
13759.2
... More
Laying of 1 No. additional 11 KV (E) XLPE insulated armoured Aluminium conductor 3 core 120 Sq. mm cable conforming to IS:7098 (Pt.II) (Latest version) in ground in the same above trench in one tier hirizontal formation at depth of not less than 1 meter below ground level including excavation, sand cushioning of 80 mm thick all-round etc. protective covering with bricks on side & top, refilling the trench as per technical specification including testing and commissioning.
550
52
28963
... More
Supply and Laying of G.I. Pipe 80 mm dia. class B ISI marked under road/rail clamping with erected pole or wall as per technical specification for passing cable of different size.
30
330
9900
... More
Supply, Fabrication and Erection of angle iron 35 x 35 x 5 mm / 40 x 40 x 6 mm / 50x 50 x 6 mm conforming to IS: 808/1989 (Latest Version)/M.S. Plate for making structure/ bracket as supporting arrangement for any equipment complete with clamp, nut bolt etc. complete in all respect as per site requirement.
-
-
48
... More
Supply and provision of rubberized matting of size 2 Meter x 1 Meter x 1⁄4 inches conforming to IS:15652/2006 for insulation purpose in front of HT/LT Panel.
8
1683
13464
... More
Supply, Erection, Testing and Commissioning of Mobile charging board made by hard 82 board 10 mm thick size 205 mm x 215 mm x 60 mm, 4 nos socktes 5 pin 6 amp on each board, one no indication lamp on each board, fuse kit kat on each board, fixing of 205 mm x 160 mm x 10 mm thick hard board sheet for supporting of mobile phone. ( Socket, fuse, indication lamp in white colour).
60
414
24862.8
... More
Supply, Installation, Testing and Commissioning of Earthing with pipe 4.5 meter long 57 and 40 mm dia with masonry enclosure on the top with RCC Cover including earth connection to equipment with 4 mm dia G.I. wire in 15 mm dia G.I. pipe and using salt and charcoal for pipe earth electrode as per drawing L/16/STD/86 as enclosed as per IS 3043/1987 (latest Version).
88
1764
155232
... More
"Supply, Installation, Testing and Commissioning of 1 x 250 KVA 11/0.415 KV Compact Substation outdoor duty, plinth mounted type complete with HT Section Comprising of 1 No. 11KV 3- way RMU ( 2 No. LBS + 1 No. VCB). LT section-Incommer - ACB 630 A FP Electrical Draw out type 50KV - 1 No, Bus Coupler- ACB 400A FP Electrical Draw out ACB 50KA - 1 No, Outgoing - MCCB 250A FP 1 Manual Fixed Type -2 No, MCCB 160A FP Manual Fixed MCCB - 2No and MCCB 100A FP Manual Fixed MCCB - 2No, CSS enclosure should be duly type tested for internal Arc Test by CPRI (21 KA for 1 Sec.) and as per CEE/NER Spec No. CEE/CSS/17/June - 2017 with latest Amendment. Details of switchgears and equipments are mentioned in the attached Explanatory Note. Note :- CSS (excluding foundation) shall be inspected at manufacturer's premises by the RITES. Cost for the inspection shall be borne by the contractor."
2
4042946
8085892
... More
Installation on Wall/Ceiling with grouting of M.S. Nut Bolts 3/8 inch dia, connection with 32 Twin core PVC insulated flexible copper conductor FR cable of size 14/0.193 mm including testing & commissioning of pre-wired indoor LED fitting complete with as per technical specification including earthing complete in all respect. NOTE:- LED fitting will be supplied by Railways in packed conditions.
594
32
19435.68
... More
Supply, Installation, Testing and Commissioning of Busbar Chamber System 400 A Rating Four Pole 4 way type conforming to IS:8623 and IS:2147 with latest version busbar layout 76 stack layer type short circuit withstand capacity 35 KA Degree of protection IP 31 fabricated with sheet steel (CRCA) 1.6 mm thickness and epoxy powder coated, bus bar section made of ETP grade copper dull tin plated with DMC support, Neutral bus bar fully rated, top and bottom end plate detachable suitable for 440 V 50 HZ AC Supply complete in all respect.
2
16236
32473.28
... More
Supply, Erection, Testing and Commissioning of following Modular Type switch 6/10A (1-way) complete in all respect.
1455
71
104207.1
... More
Supply and Erection of Fan Sheet Cover POP type complete in all respect including hardware material for fixing.
-
-
19
... More
Excavation of cable trench of 110 Cm Depth and 30 Cm wide in all kinds of soil and its refilling with the same excavated soft soil.
100
31
3136
... More
Supply, Erection, Testing and Commissioning of following Modular Type switch 16/20A (1-way) complete in all respect.
119
146
17387.09
... More
Laying of L. T. Cable of required size in open/air/along wall/ along pole with clamping arrangement conforming to IS:1255/1983 (Latest Version). (Cable will be supplied by Railway)
1200
24
29400
... More
Supply, fixing and commissioning of H.T. Pin insulator for the use on 11 KV HT overhead line complete with G.I. Spindle and fixing nut confirming to IS : 731/1973 (latest version)
24
211
5074.56
... More
Supply, Installation, Testing and Commissioning of Cable Junction Box of size 200 mm 80 x 160 mm x 98 mm made of thermoplastic halogen free and weather proof for outdoor installation Degree of Protection IP65/IP 66 with metric knockouts for cable entry with 5 Nos. terminal block set for cable of size 16/25 Sq.mm, bracket and cable glands complete in all respect.
30
1895
56865
... More
Excavation of trenchless track by horizontal direct drilling (HDD) method under 40 Railway track/busy road etc. at a depth of minimum 120 CM below ground level as per direction of site engineer incharge along with Supply and Laying of HDPE Pipe of 150 mm inner dia confirming to relevant IS in HDD portion. (HDPE Pipe shall be supplied by Contractor)
4150
1210
5023948.5
... More
Laying and Fixing of one No. Additional PVC/XLPE Insulated PVC sheathed aluminium conductor L.T. power cable 31⁄2/4 core of grade 1.1 KV of size exceeding 25 Sq. mm but not exceeding 120 Sq. mm in ground in the same trench in one tier horizontal formation including excavation, sand 67 cushioning, protective covering and refilling the trench etc. as required. Cable laying should be as per IS-1255/1983 with latest ammendments. Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Cable will be supplied by Railway)
950
42
40033
... More
Supply and Erection of white finish single mounting cover plate with base frame suitable 12 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring.
132
233
30757.32
... More
Supply of PVC insulated multi stranded copper conductor single core HRFR cable 10.0 9 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
5200
94
491660
... More
Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 8 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall.
166
87
14584.76
... More
Laying of 1 No. XLPE insulated and PVC sheathed L. T. power cable of grade 1.1 KV size 31⁄2/4 core size exceeding 25 Sq mm but not exceeding to 120 sq. mm Alluminium conductor cable direct in ground including excavation, sand cushioning, protective covering and refilling the 66 trench etc. as required. Cable laying should be as per IS-1255/1983 with latest ammendments. Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Cable will be supplied by Railway)
950
137
130340
... More
Supply, Installation, Testing and Commissioning of Slim surface mounted Round LED 35 downlight 18 W, rated voltage 240 VAC, 50 Hz, operating voltage range 90-260 volt, operating temperature range -10 degree C to +50 degree C, colour temperature 6000K, White powder coated, pressure die cast aluminum housing, integral Driver and accessories pre- wired up to terminal block, luminaire lumen out put not less than 2048 lumen complete in all respect.
4
1588
6352
... More
Supply, Installation, Testing and Commissioning of 7 Mtr. High Hot dip galvanized 81 octagonal pole with longitudinal seam weld throughout the length with bottom 130 mm across face, Top 70 mm across face made of 3 mm thick High Tensile plate and 220 mm x 220 mm x 12 mm base plate complete with one arm of 500 mm for fitting installation and 04 No. M20 (EN 8 Gr) x 700 mm long J type foundation bolt set complete in all respect with RCC foundation as per attached drawing.
1
13860
13860
... More
Supply, Installation, Testing and Commissioning of Earthing with 600x600x3 mm thick 59 copper plate earth electrode as per IS: 3043/1987 (Latest version), to achieve earth resistance less than one ohm, including construction of masonry enclosure with RCC cover on top, watering pipe, connections from earth plate to top with 40x6 mm copper strip in 50 mm dia GI pipe class "B", provision of earth plate as per drawing and technical specification.
4
8415
33660
... More
Laying of 1 No. 11 KV (E) XLPE insulated armoured Aluminium conductor 3 core 120 60 Sq. mm cable conforming to IS:7098 (Pt.II) (Latest version) in ground in single trench in one tier hirizontal formation at depth of not less than 1 meter below ground level including excavation, sand cushioning of 80 mm thick all-round etc. protective covering with bricks on side & top, refilling the trench as per technical specification including testing and commissioning.
550
154
84903.5
... More
Manufacturing, Supply, Erection, Testing and Commissioning of Feeder Pillar equipped with three phase & Neutral bus bar aluminium capable for 400 Amp capacity for each phase and 52 neutral. Size of fidder panel box 1000 mm height x 600 mm width x 350 mm depth and feeder pillar to be grouted on ground with help of four No. mounting angle of size 50x50x6 mm of length 500 mm the cost should also be include the cost of end cable termination with proper size cable lugs & cable glands.
2
23769
47539.8
... More
Supply and Erection of swaged steel tubular pole conforming to IS: 2713 Part I to 64 III/1980 (Latest Version) complete with base plate, earthing bolt, digging of pit in ground, making foundation up to 300 mm above ground level as per Drawing, Erection of pole vertically, earthing, painting as per Technical Specification of size 11.0 Mtr. With Bottom 5.60 Mt., Middle & Top 2.70 Mt. Approximate weight 227 Kg. (Designation 410 - SP 55)
4
15840
63360
... More
Carting of Material from Railway site supervisor's depot to site (Only for the material supplied by Railway and returning of Released material from site to store depot of Supervisor)
15600
13
209664
... More
Supply & Laying of 100 mm dia C. I. Pipe (Spun pipe) conforming to IS 1536/2001 with latest amendment class LA & ISI Marked
40
1178
47124
... More
Supply, installation, testing and commissioning of Gang operating air break off load diconnecting switch (GOS) 11 KV 400 Ampere complete with drop out fuses, 03 insulator triple pole each pole consist of galvanized steel base HT insulator as per BIS non ferous knife and spring loaded 3 contact arcing horn of adequate section to break magnatisening current of the transformer, horizental GI shaft/pipe of adequate length for phase seperator, adequate length for operation from ground level and operating handle complete with locking arrangement in both OFF & ON position. All ferous part heavily tinned to with stand weather. Fuse shall be conforming to IS - 9385 part I/1979, GOS shall be conforming to IS - 9921 Part - I/1981 & 9921 Part - III/1982.
3
12250
36750
... More
Laying and Fixing of one No. Additional PVC/XLPE Insulated PVC sheathed aluminium conductor L.T. power cable 31⁄2/4 core of grade 1.1 KV of size exceeding 25 sq mm but not exceeding 400 Sq. mm in ground in the same trench in one tier horizontal formation including excavation, sand 69 cushioning, protective covering and refilling the trench etc. as required. Cable laying should be as per IS-1255/1983 with latest ammendments. Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Cable will be supplied by Railway)
8500
42
358190
... More
Supply and Laying of G.I. Pipe 50 mm dia. class B ISI marked under road/rail clamping with erected pole or wall as per technical specification for passing cable of different size.
330
250
82500
... More
Installation and Commissioning of LED Street Light/Flood Light fitting on pole including connection with Twin core PVC insulated flexible copper conductor cable of size 1.5 Sq. mm complete in all respect. ( LED Street Light/Flood Light fitting will be supplied by Railway)
114
136
15590.64
... More
Supply of PVC insulated multi stranded copper conductor single core HRFR cable 2.5 6 Sq. mm conforming to IS: 694(latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning.The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
29600
21
648536
... More
Supply of PVC insulated multi stranded copper conductor single core HRFR cable 6.0 8 Sq. mm conforming to IS: 694 (latest version), and drawing in laid (recessed /surface) PVC conduit pipe for wiring of point wiring/ circuit wiring/sub main/ Main as required as per technical specification including connections, testing and commissioning The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
9600
46
448320
... More
Supply, Installaion, Testing and Commissioning of SPN MCB Distribution Board 8 Way 29 double door made with 1.2mm thickness CRCA sheet fully powder coated of 50-70 micron with 01 No. MCB 02 Pole 40 Amp 10 KA 230V as incoming and 06 Nos. MCB of 6-20 Amp single pole 10 KA 230 Volt as outgoing complete in all respect including connection as required.
34
2442
83028
... More
Supply, Erection, Testing and Commissioning of floor mounted indoor panel (1 Incomer 630 Amp ACB and out going 2 x 250 Amp, 2 x 100 Amp and 2 x 63 Amp MCCB).The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
1
319148
319148.4
... More
Supply, Installation, Testing and Commissioning of Phase Selector TPN Distribution Board with Metal door powder painted with inbuilt 3 Nos 63 Amp Phase Selector, 100 A copper busbar for each phase and neutral bar duly wired and provision for 8 Module for incomer, 24 module for SP outgoing (8 Way in each phase), earth bar and Din rail etc. conforming to IS: 13032/1991 and IS 8623 (Pt I and III)/1993. along with supply and fixing of 01 No. MCB 63 Amp 4 pole, 10 KA, 230 VAC and 24 No. MCB Single Pole 6/10/16/25 Amp 10 KA, 230 VAC complete in all respect including connection as required. Make ABB, L&T, HPL, SELEC, Havels or Similar Reputed Make
-
-
34
... More
Cutting of CC work of Platform/Road for laying of cable and supply of Cement and sand for repairing of the CC work of platform/Road as per the directive of site in charge complete in all respect.
4
1960
7840
... More
Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 12 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall.
132
141
18656.88
... More
Supply and Fixing of Coupler plate with hardware for 50 mm Height Hot Dip galvanized/powder coated type trays
200
41
8220
... More
Laying of DWC pipe (90/76 mm) with socket coupler in trenches as per requirement.
-
-
56
... More
Supply, installation, testing and commissioning of metal oxide lightning arrestor without gaps type conforming to IS - 3070 : Part - III/ 1993 suitable for protecting 11 KV installation including connection with earth pit by 25 mm x 6 mm GI strip and with overhead by ACSR conductor.
1
6435
6435
... More
Supply and Fixing of Coupler plate with hardware for 100 mm Height Hot Dip galvanized/powder coated type cable trays
80
64
5174.4
... More
Supply and fixing of Hot Dip galvanized type cover plate for 100 mm width cable tray with 18 SWG Sheet.
450
182
81967.5
... More
Supply, Erection, Testing and Commissioning of following Modular type Plug socket outlet 2/3 Pin 6/10A complete in all respect.
488
118
57784.08
... More
Installation, connection with Twin core PVC insulated flexible copper conductor HRFR 27 cable of size 14/0.193 mm (0.41 Sq. mm) testing and commissioning of 1200/ 1400 mm sweep AC ceiling fan (on the installed CI/MS Box) including earthing as per technical specification. (NOTE:- A.C. Ceiling fan in packed conditions will be supplied by Railways.)
156
42
6573.84
... More
Laying of 1 No. XLPE insulated and PVC sheathed power cable of grade 1.1 KV size 31⁄2/4 core size exceeding 25 sq mm but not exceeding 400 Sq mm Alluminium conductor cable direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as 68 required. Cable laying should be as per IS-1255/1983 with latest ammendments. Digging of trench in all kinds of soil up to the depth of 750 mm and 350 mm wide for laying of cable with supply and placing of second-class bricks, approx. 10 bricks per meter, refilling of cable trench with solid earth consolidating by ramming by 270 mm above the surrounding level over trench. (Cable will be supplied by Railway)
8500
137
1166200
... More
Supply and fixing of 1.6 mm thick mild steel sheet Danger plate 11000 Volts AC supply of Size 200 mm x 250 mm confirming to IS:2551/1982 with latest version complete in all respect.
6
69
415.8
... More
Supply of barbed wire GI 12/12 and making anti climbing device on bracing on pole etc. up to suitable height of safety complete in all respect.
80
69
5544
... More
Supply and Fixing of Hot Dip galvanized ladder type cable tray 300 mm width and 100 mm height made with 12 SWG Sheet.
200
980
196000
... More
Supply and Testing of 3 3/4 Digit Digital Insulation Resistance Tester with multimeter functions with test voltage 500V/1000V/2500V with test insulation resistance up to 40 G Ohm.
2
7611
15222
... More
Supplying, fabrication, installing, fixing of MS sheet junction box (outdoor type) size 450x450x200 mm made of 1.6 mm thick M.S. sheet having lockable cover duly painted with gray 51 paint over red oxide primer duly naming 240/415 volts with red paint complete with 3 phase aluminium bus-bar one for neutral with Al. strips 40x10 mm fixed with bus-bar insulators including suitable size of cable gland in bottom side for incoming & outgoing cable and including double earthing stud complete in all respect. The junction box will be fitted on Rail pole on platform/off side with M.S. flat clamps, bolts & nuts etc. for interconnection to pre-cooling points.
62
1853
114927.54
... More
Supply and Erection of Junction Box cover POP type complete in all respect including hardware material for fixing.
1300
5
7501
... More
Supply, Fabrication and Erection of channel iron 100 x 50 x 6 mm / 75 x 40 x 6 mm / 50x50x6mm cross arm conforming to IS: 808/1989 (Latest Version) for overhead line complete clamp, nut bolt etc. complete in all respect as required on pole.
3000
64
193050
... More
Supply and Erection of white finish single mounting cover plate with base frame suitable 3 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring.
176
76
13444.64
... More
Supply and Erection of Modular Metal boxes concealed Boards suitable for mounting of 3 module white finish single mounting cover plate with Frame and Modular type piano switches/ plug Socket, fan regulators. Metal board boxes are to be concealed in wall.
176
50
8824.64
... More
Supply and making indoor end termination with heat shrinkable jointing kit conforming 63 to IS: 13573/1992 (Latest version) complete with all accessories including aluminium lugs suitable for 3 core 120 Sq. mm HT XLPE aluminium conductor cable of 11 KV (Earthed) grade complete in all respect as required.
6
7220
43320.42
... More
Supply and Laying of G.I. Pipe 100 mm dia. class B ISI marked under road/rail clamping with erected pole or wall as per technical specification for passing cable of different size.
20
441
8820
... More
Supply & Laying of Hot Dip Galvanized Iron Strip of size 25x6 mm /40x6 mm in ground below 0.30 Mtr./ in floor below 0.05 Mtr. from pit to equipment and connection as required and as per direction of site in-charge.
20
79
1585.6
... More
Supply and Erection of white finish single mounting cover plate with base frame suitable 8 module suitable for mounting of Modular type piano switches/ plug Socket, fan regulator and connection to wiring.
166
161
26790.74
... More
Supply and Testing of 5 KV HV Insulation Resistance Tester, 0.5 KV/1 KV/2.5 KV/5 KV Test insulation Resistance up to 1 T Ohm with PI Function & PC interface.
2
63484
126968
... More
Fabrication, Supply and Fixing of Fan Hook with clamp duly painted made of 50x6 mm MS Flat with nut bolts suitable to fix on PP shelter bracing angle as required.
156
98
15288
... More
Supply and recessing/fixing of PVC Conduit pipe 25 mm (Medium) conforming to IS 5 9537/ Part III/1983 (Latest version) with accessories, junction box, etc including making chase, plastering/ clamping etc as per technical specifications. The material shall be inspected at manufacturer's premises by RITES and inspection charges shall be borne by the firm.
11400
43
500688
... More
Supply and Fixing of fire bucket (filled with sand) fitted in proper stand with shed cover, hook and locking arrangement at suitable place decided by site in charge.
8
207
1663.2
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%