Tenders of North Central Railway in Uttar Pradesh

Scrap Ms Structure Consisting Of Angle, Girder, Ms Gate, Filter Tank, Iron Battery Boxes, Ms Plates,tie Bar Fencing, Loose Tie Bar, Ms Jali,ms Water Tank ,pipe Structure, Heavy Blower,rail Trolly Wheel ,empty Stater,crane Structure ,shutter Ms Gate, Empty Rru,ms Saria,gate Boom,pipes,protective Screen Fob's And Rob's And All Type Heavy Structure Items With Or Without Undetchable Ms And Nf Attachment. Note - Cutting Allowed For Easy Loading Only..note-while Delivery If Any Other Non Ferrous Or Non Similar Items Found In The Lot Will Not Be Delivered.rail And Electric Pannel Will Not Be Delivered.qty.on Approx Basis.

Scrap Cut Of Overaged Condemned Coaches 8 Wheeler (b.g.) Without Complete Sets Of Trolly & Wheel Sets Type Of Rcc (1) Nc 91279 Rcc (2) Nc 95988 Rcc Total Tare Weight Aprrox =76.790 Mts,total Deliverable Quantity 02 Nos( 53.625 Mts),(a) Total Weight Of Ferrous Approx=44.695 Mts,(b) Total Other Than Ferrous=7.999 Mt Aprrox(i) Steel=0.022 Mts(ii) Wooden Pvc& Glass Shutter=7.000 Mts(iii) Battery=0.977 Mts(c) Non Ferrous Weight Approx =0.931(i) Alluminium=0.926 Mts(ii) Copper=0.005 Mts Ds8 Note No.-49/no-000014 Dt-22.12.2023&000020 Dt-13.03.2024 Note:- Delivery On Number Basis Cutting Would Be Allowed After Handover For Easy Loading Returnable Items Will Not Be Delivered And Will Be Returned By The Purchaser Concerned Stock Holder.returnnable Itms Are:- Complete Sets Of Trolly & Wheel Sets Note:- Lots To Be Sold & Delivery On Number Basis , Note-all Rubbish Will Be Removed By Purchaser From The Cutting And Delivery Place And All Rubbish Should Be Cleaned By The Purchaser It Is Responsibility Of The Delivery Team. Purchaser Should Read The Special Condition Of E- Auction Governing The Sale And Satisfy Themselves Before Bidding

Wiper Control Valve Assembly

Scrap Ss Sheet And Pannel Sheet Of All Sort And Size With Or Without Ms Attachment.[qty On Approx Basis].note-cutting Allowed For Easy Loading.

Scrap Ms Melting Consisting, Ms And Gi Nut Bolt Revet, Signal Lever, Head Stock Assembly,rail Screw, Ms Angle Below 1 Feet,draft Gear,foot Step,punji,end Cover, Screw Coupling,buffer Plunger,bridle Bar,coupler Yoke, And All Type Of Signal Melting,signal Rod Piece Below 3 Feet, Screw Rod,joggle Fish Plate,switch Fittings,slide Chair Bearing Plate,gauge Tie Plate, Stretcher Bar,gilmet,air Brake Cylinder Complete And Loose,axle Cover,knuckle,dv,cp Top, And Bottom, Shackle,ms Round,ms Pipe Ms Bar,ms Pully, Coupler Rod,lashing Chain,signal Lever,beater, Buffer Socket, Phawrah,coupling Shaft ,iron Strips,brake Beam, Shocker , Truss Bar, Brake Beam,ms Jali,ms Small Angle, Shocker Crow Bar,axle Box Housing,shackle, Pu Pad Cover,pull And Push Rod,side Bearer Housing, Hand Brake Wheel, Equailising Lever,sab Part, Lever, All Type Jack,brake Beam, Isolating Cock ,drain Cock,bp/fp Angle Cock,bend Plate,wiper Arm Safety Shoe,clamp Bracket,operating Handle Flange,sand Injactor Body, Band Plate,all Type Of Heavy Melting Category Similar Items With Or Without Undetchable Nf Attachment .note-while Delivery If Any Other Non Ferrous Or Non Similar Items Found In The Lot Will Not Be Delivered.qty.on Approx Basis.

Scrap Mix Alluminium Led Street Light Floud Light Fitting .connector,ladder,r.r. Number Plate,sigma Board,radiator Fan,flange,pdr Heat Sink Plate,exploser Door,winding Wire,laminated Spring,hpsv/mh Fitting Off Sie,solar Plate,support Cylinder Bracket,bop Moving Of Pantograph,smaall Pistion,cooling Fan,intercooler,wiper Motor,horn Bell,gauge,horn Smith,mom,breather Servomotor,inpot,compressor Part,trolly For Plate Form Atd Pully,steady Arm,alluminium Untensils Different Types,earthing Equipment Box Door Coloser,ingot, And Pieces.etc.all Sort And Size.alluminium-98 Percent.iron , Rubber,dust 2 Percent. (qty.on Approx Basis) Note-delivery Will Be Given On 100 Mts.weigh Bridge Of Nsy.

Scrap Released Copper Catenary Wire,jumper, Dropper Wire , Catenary Clips, And Other Ohe Items.all Sort And Size.copper 99 Percent.carbon And Dust 01 Percent. [qty On Approx Basis] Note- Delivery Will Be Given On 1000 Kgs. Electronic Weighing Machine Of Non-ferrous Godown.

Condemn Shankar Lathe Machine Make- M/s Royal Foundry, Model- Sr750, Machine No 930. Year Of Commisionning - 1980, Weight Of Machine- 1.3 Mt Approx. Ferrous [cast Iron] With Nominal Attachment Of Non Ferrors. Quatntity- 01 No. Remark- Delivery On Number Basis. Reference-1. Adee/tms/cnb Letter No. 230 Elec/ Tms/cnb/scrap Ferrous/ Lot Formation Dated 16/10/2024. 2. Ds -8 Note No. 750766 Dated 16.10.2024.

Scrap Ms Shearing Plates All Sort And Sizes Including Broken. [qty On Approx Basis]

Condemned Ms Signal Location Boxes [apparatus Cases] Off Sizes Consisting Of Full And Half With And Without Minor Nf Attachment. Total Nos Of Boxes 75 Nos And Total Wt 12.291 Mt [approx]. Ds-8 Note No. 788902 Dt 28.11.2024. Delivery On Actual Weight Basis At Nearest Govt. Approved Dharmkanta. Gst 18 Percent. Note- [1] Approachable Road Is Available. [2] Bidders Are Required To Visit The Lot Site For Being Aware About The Site Condition/location And Satisfy Themselves Before Participating In The E-auction.