New Okhla Industrial Development Authority Tender

... More
The New Okhla Industrial Development Authority has issued a formal invitation for competitive bids for M/o Road (remodeling Of Footpath On 45m And 24m Wide Road At Various Locations In Sector-88) Noida in Gautam Buddha Nagar, Uttar Pradesh, with an estimated contract value of Rs. 2,69,64,043. The bid opening date for this tender is 13-11-2026 and the last date for bid submission is 18-11-2026. Interested bidders for New Okhla Industrial Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.

New Okhla Industrial Development Authority Tender - UP Tender

Opening Date13 Nov 2026
Closing Soon18 Nov 2026
Tender Amount₹ 2,69,64,043 
Notes
Download

Costs

Description

M/o Road (remodeling Of Footpath On 45m And 24m Wide Road At Various Locations In Sector-88) Noida

Contact

Unlock the Tender details

GEM & Bid Advisory Services

Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost

BOQ Items

... More
DO_NOT_SHOW

-

-

-

Unlock the Tender details
... More
Earth work in excavation by mechanical means (Hydraulic excavator) / manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead up to 50m and lift up to 1.5m, as directed by engineer-in-charge. The Contractor has defect different utilities like sewer line, water supply line, electric cable, telephone cable , gas pipe line etc, using utility decteting machine before start of excavation and shall start excavation only after getting permission of Engineer-in-charge.

680

136

92480

... More
Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering - All work upto plinth level : 1:4:8 (1 Cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size).

227

5746

1304541.76

... More
Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

92938

82

7696195.78

... More
Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete

2268

181

411959.52

... More
Centering and shuttering including strutting, propping etc. and removal of form for :Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

2835

335

951284.25

... More
Providing and laying in position ready mixed M-25 grade concrete for reinforced cement concrete work, using cement content as per approved design mix, manufactured in fully automatic batching plant and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work, including pumping of R.M.C. from transit mixer to site of laying , excluding the cost of centering, shuttering finishing and reinforcement, including cost of admixtures in recommended proportions as per IS : 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability as per direction of the Engineer-in-charge. (Note :- Cement content considered in this item is @ 330 kg/ cum.Excess/less cement used as per design mix is payable/recoverable separately). All works upto plinth level

610

7912

4826515.2

... More
12mm cement plaster of mix : 1:4 (cement :4 coarse sand)

1975

176

349120.75

... More
Neat cement punning(13.18)

1975

39

77281.75

... More
Providing wall putty on new Surface with Approved Quality Material of Berger/ J.K / Birla or Similar Make 2 Coats.

3595

63

226485

... More
Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture.

3595

117

422700.1

... More
Providing and laying factory made chamfered edge cement concrete pavar blocks in foot path park & lewns driveway or light & traffic parking etc. of required strength , thickness & size / shape , made by table vibratory method using PU mould laid in required colour & pattern over 50mm thick compacted bed of sand , compacting and proper embedding / laying of inter locking paver block into the sand brdding layer through vibratory compaction by using plete vibrator , filling the joints with sand and cutting of paver blocks as per required size and patten finising and sweeping extra sand . complete all as per direction of engineer - in- charge 16.91.2 80mm thick C.C paver block of M-30 grade with approved design and pattern.

11726

696

8162351.34

... More
Providing and laying in position cement concrete of specified grede excluding the cost centering and shutting -all work up to plinth level 1:2:4 (1 cement :2 coarse sand (zone-111) :4 graded stone aggregate 20m nominal size.

198

6753

1337183.1



Evaluation Notes How It Works ?

Related Tenders

Disclaimer: BidAssist has made every reasonable effort to ensure that the information is accurate and authentic however it cannot be held liable for any third-party claims or losses of any damages. BidAssist makes no warranty, expressed or implied, as to the results obtained from the use of the information. If you think you may have noticed any error or omission, please let us know by contacting contact@bidassist.com.