Muzaffarnagar Development Authority Tender

R.C.C. work with cement approved corsand & 2 cm gauge stone grit in proportion of 1:1.5:3 in slab Excluding supply of reinforcement and its bending, but including its fixing and binding the same waith 24 B.W.G.G.I. binding wire and including necessary centering and shuttering etc. and supply of all materials, labour, Tools & plants etc. required for proper completion of the work including cost of binding wire. The rate excludes making of drip course which shall be paid extra. (S.I. No. 284(a)/2022)

M.S (Tor steel or plain) work in plain work such as RCC or RB work including bending for proper shape and including supply of steel and its wastage, bend, hooks and authorized over lapping shall be measured and including cost of binding wire (S.I. No. 504/2022) A.R.

Construction of granular sub-base by providing coarse graded material, sperading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per clause 401 (Grade-I) (Ref. to Mort&H Specification No. 401) (A.R)

Cement concrete with 2cm gauge approved stone grit, coarse sand & cement in proportion of 1:1.5:3 in cc pavment (thickness as per design) cement coarse & fine aggregate confirming to IS standred mixed in concrete mixer/plant of not less than 0.2 cum capacity and appropriate weight batcher using approved mix design, laid in approved fixed from work(steel channel) laying & fixing of 125 micron thick polythene film, wedges, steel plates including levelling the form work spreding the concrete with shovles. rakes, compacted using needle, screed and plate vibrators and finished in continuous operation including hassion cloth for curring of concrete pavments for not less then 14 days, curing compound (Where specified) and water finishing to lines and grade includings supply of all materials, labour Tools &plants etc. required for proper completion of work and also includin complete shifting of Recron 38 fibre reinforcement materials etcl & concrete etc S.I. No. New Item 9/2022

Supply and Laying of 80mm thick ISI marked I shaped/other approved shaped mechanically compressed interlocking cement concrete paver blocks with top layer of minimum 5 mm thickness of O.P. cement having plan dimension 200x(160+120mm), smooth high gloss finish, skid resistant manufactured from rubber moulds through vibro-compression mechanism. The compressive strength of concrete paver blocks shall not be less than 40Mpa and weight 4.5 kg per no. confirming to IS:15658-2006 including cost of all materials, labour, T&P etc., laying with a blanket layer of 4.00 cm thick local sand including leveling and dressing surface up to required level and slope filling joints with local sand i/c all required for proper completion of the work as directed by Engineer-in- charge and as per drawing & technical specification of clause 1504. New item 14

Earthwork in cutting or in embankment in ordinary soil, excavation to be done from regular pits not exceeding 1/2 M. in depth and work embankment to be in 20 cm layer including ramming and dressing the surface to required levels and slopes and also including 1.5M lifts and lead up to 30M . The earth from cutting to be used in making embament or to be deposited as spoil banks within 30M distance as directed by the Engineer-in-charge. (SI No 253a+261-b+231-a)

S/F of sign Marble board (Pre Approved Rate)