Meerut Development Authority Tender

507-Providing and laying dense graded bituminous macadam with 100-120 tonnes per hour batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregated of specified grading-I, premixed with 60/70 bituminous binder @ 4.25 percent by weight of total mix and hydrated lime filler @ 2% of total weight of aggregates, transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled (8-10 tonnes roller for initial brake down rolling, vibratory roller (8 tonnes) for intermediate rolling and finish with tandem rollers (6-8 tonnes) to achieve the desired compaction, including supply of all materials, labour T& P etc. required for proper completion of the work as per Clause-507 of MORT & H Specifications and as per direction of the Engineer-in-charge.

503-Providing and applying tack coat with bitumen emulsion slow type using emulsion pressure distributor at the rate of 0.35 kg. per sqm on the prepared bitumeneous / granular surface cleaned with mechanical broom including supply of all materials, labour T&P etc. required for proper completion of the work as per clause 503 of MORT&H specification and as per dierction of the Engineer in charge.

AR -Providing and laying bituminous concrete with 100-120 tonnes per hour batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregated of specified grading-II, premixed with 60/70 bituminous binder @ 5.0 percent by weight of total mix and hydrated lime filler @ 2% of weight of aggregates, transporting the hot mix material to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment rolling with smooth wheeled (8-10 tonnes) roller for initial brake down rolling, vibratory roller (8 tonnes) for intermediate rolling and finish rolling with tandem rollers) 6-8 tonnes) to achieve the desired compaction, including supply of all materials, labour T&P etc. required for proper completion of the work as per Clause - 509 of MORT & H Specifications and as per direction of the Engineer-in-charge.