Mathura Vrindavan Development Authority Tender
... More
If you're a registered bidder for etender UP and want to inquire about any e-tender UP government has posted, this is your stop. No need to enter every detail on the website of etender.up.nic.in - BidAssist filters will help you find the exact UP etender you're looking for. Read to learn how to search & bid for etender UP.
Mathura Vrindavan Development Authority - MVDA Tender
Civil And Construction
Road Construction
Eprocure
Opening Date15 Apr 2025
Closing DateCancelled
Tender Amount₹ 3,30,66,000
Technical
Technical
Financial
Additional Eligibility
Class Of Bidder
... View More
For Electrical works, the class eligibility requirement to bid or participate in the tender is 'A' class Electrical licence from U.P. Govt. However, for other types of works, such as ROAD WORK, the specific class eligibility requirement is not mentioned. But in general, for works up to Rs. 500.00 Lacs, the contractor must be registered and participate only in tenders respective to his approved category.
Bid Capacity
... View More
Bid Capacity = 1.5 * Bid Value
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the work category. 1. Work more than 40.00 Lacs & up to 50.00 Lacs: Two jobs of total value equal to the bid value.
2. Work more than 50.00 Lacs & up to 150.00 Lacs: Two jobs of total value equal to the bid value.
3. Work more than 150.00 Lacs & up to 500.00 Lacs: Two jobs equal to bid value or one total 75% of bid value.
4. Works more than 500.00 Lacs: Two works to total value 75% to the bid value. The bidder shall furnish proof showing that they have a work experience of at least 4 years unless qualified for relaxation as per clause 3.1. No specific information is available on the percentage of similar works completed.
Costs
EMD
₹ 5,900Document Cost
₹ 18,53,000Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPMVD_1028436_2Tender No
01/MVDA/2025-26 2BTender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Providing & laying spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mix plant carriage of mixed material by tipper to site laying in uniform layer with paver in sub-base/base coarse on well prepared surface and compacting with vibratory roller to achieve the desired density, MORT&H - 406.
1232
2620
3227840
... More
Providing and applying Prime coat with bitumen Emulsion using Bitumen pressure distributor at the rate of 0.60 kg per sqm on the prepared bituminous/granular surface cleaned with mechanical broom.
6160
32
198968
... More
Providing and applying tack coat bitumen VG-10 using emulsion pressure distributor at the rate of 0.3 kg per sqm on the prepared bituminous/granular surfacecleaned with mechanical broom.
19360
16
327184
... More
Providing and laying dense graded bituminous macadam with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hous using crushed sggregates of specified grading, premixed with bituminous binder VG-30 @ 4.25 percent by weight of total mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause no. 507 complete in all respects.
968
9466
9163088
... More
Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder VG-30 @ 5.40 percent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver fnisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandom rollers to achiev ethe desired compaction as per MoRTH specifications Clause no. 509 complete in all respects.
528
11393
6015504
... More
Brick edging on both side of the road of M-150 brick 8cm. (3'') wide and 12cm (4½'') deep laid with mud mortar including all labour and supply of brick finished to required template & ramming the excavated earth as directed by the Engineer-in-Charge.
880
85
74800
... More
Supply & Laying of precast Interlocking tiles of thickness 100mm (Compressive strength not less then 30Mpa and weight 4.50kg) Including 25mm thick local sand base levelling and dressing of surface to required level and slope, filling joints with local sand as per design approved by Architect or Engineer-in-charge all complete work. (rubber mould) 100 mm Rubber Molded ordinary Tile
1800
990
1782000
... More
100 mm Rubber Molded coloured Tiles
600
1030
618000
... More
Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.
2140
618
1322520
... More
Reflective Raised Pavement Markers(Cat eye/Road stud).
1200
324
388800
... More
Providing and fixing post delineators made of ABS round body fitted with 2 nos 100 mm dia high reflective reflectors and mounted on MS pipe of 65 mm dia duly powder coated anti-rust and anti theft steel to be installed as per direction of Engineer-in-charge.
300
658
197400
... More
16.69 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge).
108
7366
795528
... More
Chequerred precast cement concrete tiles 22 mm thick in footpath & courtyard, jointed with neat cement slurry mixed with pigment to match the shade of tiles, including rubbing and cleaning etc. complete, on 20 mm thick bed of cement mortar 1:4 (1 cement: 4 coarse sand).11.20.2 Medium shade pigment using 50% white cement 50% Grey cement.
720
967
696240
... More
Flexible Median Markers(FMM).
1150
312
358800
... More
Supply and fixing of decorative arm bracket made out of GI Pipe dia Mm arm leanth 600 mm each side with suitable sleeve for pole top dia’’ and bracket will be complete with polyurethane painted as per given colour shade as per direction of E/I
40
6000
240000
... More
Supply & Laying of 16 sq.mm 4 core aluminium conductor PVC insulated, armoured, sheathed cable, 1100 volts grade at a depth of 600mm below ground level direction of E/Ic (PWD SOR-501-T)2016( polycab/ KEI/ grandlay Make).
1000
343
343000
... More
Supply & Laying of 4 sq.mm 2 core flat twin aluminium cable PVC insulated complete with labour,T&P as per direction of E/I
400
60
24000
... More
Supply and burring of safe earthing electrode T-19 Zn-Zinc coated, length up to 2000 mm., outer pipe 48.4 mm. x 3.2 mm., inner pipe 26.9mm.x2.6 mm., terminal dia. 12 mm., coating 80-100 micron filled with crystallinc conductive mixture (CCM) having anti corrosive & conductive properly with 50 kgs. activated soil (BFC) capable of reducing the soil resistivity with good mixture of retaining capacity along with 30 cm square C.I. frame with hinged cover & masonry housing. (From electrode terminal to switch board, cost of 25x3 G.I. strip will be extra). Make : As approved in U.P. P.W.D. & C.P.R.I. certified. PWD SOR 2017-18 S.I. No. 725-B
4
10040
40160
... More
Supply and Fixing Following Capacity of automatic street light cubicle control panal painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC Fuse, isolating switch Metering instrument & instrument box with CTs etc. in case of TPN, Complete in all respect. 40 A TPN. SOR No. 807 (F)II
2
29300
58600
... More
Supply and fixing of steel tubular pole11.0 metre long designated 410 SP55 in 1 : 3 :6 cement concrete foundation including excavation back filling etc. complete in all respect.
40
22500
900000
... More
Painting of the electric pole with 2 coats of aluminium paint over red oxide primer complete in all respect. SOR 2018 S.I. No. 634
40
324
12960
... More
Supply and fixing of M.S. box of size 480mm x 480mm x 200mm deep in sunk for housing BDB/TPN fabricated from 16 gauge M.S. Sheet and 13mm x 2.5mm flat iron etc. painted outside with red oxide primer and inside with synthetic enamel paint complete in all respect. PWD SOR 2018 Si No. 1114 A
40
1110
44400
... More
Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 110 to 130 Watt. Confirming to IP 66 Protection complete in all respect.PWD SOR 2016 S.I. NO. 1424 CAT-AAA (philips Make only).
80
10500
840000
... More
Supply,Fixing and Testing of PVC Covering 2 Mtr. High around the pole complete as per diirection of Engineer in charge.
40
850
34000
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%