Mathura Vrindavan Development Authority Tender
... More
The MVDA has issued a formal invitation for competitive bids for the Mathura Vrindavan Development Authority project, for Work No 02 Janpad Mathura Ke Antargat Vrindavan Avam Barsana Me Path Prakash Vyavastha Ka Karya in Mathura, Uttar Pradesh, with an estimated contract value of Rs. 3,80,34,000. The bid opening date for this tender is 28-02-2025 and the last date for bid submission is 26-03-2025. Interested bidders for Mathura Vrindavan Development Authority tender can download the important documents here to check the scope of work, eligibility criteria and technical requirements.
Mathura Vrindavan Development Authority - MVDA Tender
Electrical and Electronics
Electrical Works
Eprocure
Opening Date28 Feb 2025
Closing Date26 Mar 2025
Tender Amount₹ 3,80,34,000
Technical
Technical
Financial
Class Of Bidder
... View More
Class-A (ROAD WORK)
Bid Capacity
... View More
The bid capacity required in the given tender to bid having value and formulas are as follows: 1. For works more than 40.00 Lacs & up to 50.00 Lacs: - Cumulative turnover during the last three consecutive years: 1.5 times bid value (B.O.Q.) - Liquid assets: 1.5 times bid value (B.O.Q.) and 15% of the bid value. 2. For works more than 50.00 Lacs & up to 150.00 Lacs: - Cumulative turnover during the last three consecutive years: 1.5 times bid value (B.O.Q.) - Liquid assets: 20% of the bid value. 3. For works more than 150.00 Lacs & up to 300.00 Lacs: - Cumulative turnover during the last three consecutive years: 1.5 times bid value (B.O.Q.) - Liquid assets: 25% of the bid value. 4. For works more than 300.00 Lacs: - Cumulative turnover during the last three consecutive years: 2.0 times bid value (B.O.Q.) - Liquid assets: 25% of the bid value.
Technical Capacity
... View More
The required prior work experience for the bidder varies based on the category of work. The details are as follows: 1. Work more than 40.00 Lacs & up to 50.00 Lacs: At least four years in organized sector with two jobs of total value equal to the bid value. The bidder should have a Diploma Engineer with 1 year of experience, but relaxation of 1 year in experience will be given if the company is owned by a Diploma engineer, and relaxation of 2 years in experience will be given if the company is owned by a Graduate engineer.
2. Work more than 50.00 Lacs & up to 150.00 Lacs: At least four years in organized sector with two jobs of total value equal to the bid value. The bidder should have a Graduation Engineer 1 and Diploma Engineer 1.
3. Work more than 150.00 Lacs & up to 500.00 Lacs: At least four years in organized sector with two jobs equal to bid value or one total 75% of bid value. The bidder should have a Graduation Engineer 2 and Diploma Engineer 2 for work up to 300.00 Lacs, and Graduation Engineer 2 and Diploma Engineer 3 for works more than 300.00 Lacs.
4. Works more than 500.00 Lacs: At least four years in organized sector with two work to total value 75% to the bid value. The bidder should have a Graduation Engineer 2 and Diploma Engineer 3. The value and percentage of similar works completed are:
- Cumulative turnover during the last three consecutive years: - For work more than 40.00 Lacs & up to 50.00 Lacs: 1.5 times bid value (B.O.Q.) - For work more than 50.00 Lacs & up to 150.00 Lacs: 1.5 times bid value (B.O.Q.) - For work more than 150.00 Lacs & up to 300.00 Lacs: 1.5 times bid value (B.O.Q.) - For works more than 300.00 Lacs: 2.0 times bid value (B.O.Q.)
- Liquid assets: - For work more than 40.00 Lacs & up to 50.00 Lacs: 15% of the bid value - For work more than 50.00 Lacs & up to 150.00 Lacs: 20% of the bid value - For work more than 150.00 Lacs & up to 300.00 Lacs: 25% of the bid value - For works more than 300.00 Lacs: 25% of the bid value A relaxation of 20% shall be given on the total requirement of turnover for all the working contractors.
Costs
EMD
₹ 21,02,000Document Cost
₹ 5,900Tender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_UPMVD_1011936_4Bid Award Id
ViewTender No
30/MVDA/2024-25Tender Authority
Mathura Vrindavan Development Authority ViewPurchaser Address
-Website
http://https://mvda.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
... More
Supply of Solar AIO Single piece High pressure Die cast (LM6 Alloy) 17W Aluminium housing appearance of Solar AIO shall be traditional Street Light, IP65 & IK08, suitable for OD 50/60mm bracket, having Min 3000 lumens, suitable for 24hrs (2 Nights) Autonomy and its backup calculation sheet shall be approved by Consultant Dimming Profile :
• From Dusk – First 05hours sensor enabled with 30% brightness level
• Next 05Hours sensor disabled and fixed at 30% Brightness level
• Next 2hours/dawn- Sensor enabled with 30% brightness level
Lithium pherrophosphate Battery capacity min 20Ah@12.8V or 256 watt hour & shall be of fresh manufactured battery (Not re-used cells) Battery Temp range -20-+60℃ and panel capacity min 35Wp, CRI =70, Efficacy Min 175lm/W is MUST, system wattage should not be more than 17W ± 5%, if wattages increases then the size of battery & panel shall also be increased in similar percentage to maintain equal autonomy of the system. Life class of LED System 50000hrs@L70, LED Make - CREE/ NICHIA/ LUMILEDS /OSRAM. CE Certified, charger efficiency 90% and standards IEC62109-1, IEC61547, CISPR15, IEC62093, IEC61347-2-13, IEC62133-02-13, IEC 61000-4-5, EN50530, IEC62384 The PV module should be made up of crystalline silicon solar cells "Mono-Crystalline" and must have a certificate of testing conforming to IEC 61215 Edition II / BIS 14286 & IEC 61730-1,2 IEC60598, Operating temp 0 Degree C to 50 Degree C, certifying above given prameters all reports shall be from In-house NABL or IECQ or any international accredited Laboratory, Complete luminaire /battery/panel/charge controller must be BIS accredited (If applicable) and as per UPPWD Approved Make as per dierction of E/I.. With five yeart warrenty
477
51600
24613200
... More
Supply and fixing of plain or pin type copper tin plated cable socket (lug ) to the cable leads, insulating with tape and making connection etc. complete in all respect as per direction of the E/Ic. PWD SOR 2017-18 S.I. No. 501-F16 Sq. mm.
576
21
12096
... More
Supply and Fixing of DECORATIVE DROP DOWN FIXTURE FLORENCE DD : Decorative 120 Watt LED Drop Down Fixture, made out of aluminium body with mcpcb having LED’s directly mounted on cast aluminium heat sinks. A PC/PMMA Clear / Frosted diffuser is provided for glare free lighting.Fixture is PU/Polyster painted as approved by Engineer in charge.Fixture efficiency 90%,Efficacy90 lumen/watt, CRI80,THD10%,PF95%,CCT-CW/WW Humidity, IK protection against electric shock scope of NABL Fixture is suitable for hanging/suspension on bracket. equvilant to 120W CW/WW,as approved by MVDA
72
21910
1577520
... More
Less 5% as per Govt. Approoval
0.05
40035660
-2001783
... More
Supply and laying of 32 mm x 6 mm G.I. strip from earth electrode directly in the ground as required complete in all respect. PWD SOR 2017-18 S.I. No. 717
20
150
3000
... More
Double Arm Bracket: - 1000mm long double arm bracket, 900mm over-hang (both Sides) bracket is provided for suspension of decorative lorence Drop Down Fixture. Bracket is made of Mild steel pipe with decorative embellishment. Design as approved by MVDA
72
15000
1080000
... More
S/F of 40Amp. T P N capacity of automatic street light cubicle control panel painted with anticorrosive alkali and acid proof paint consisting of timer switch TSO 100 series with contractors HRC fuses, is olating switch Metreing instrument and instrument box with CTS etc in case of TPN compelete in all respect. S.I. no. 807-F PWD SOR 2016
2
29300
58600
... More
Supply and fixing of 4 sqmm 2 core flat twin "AL" cable complete with labour T&P an dall taxes as per direction by E/I.
750
60
45000
... More
Numbring of Pole with 6' circule Yellow paint base and number with black paint.
72
28
2016
... More
6 Mtr. Nelson Mandela Pole: - Decorative casting aluminum pole having cast Aluminium base height 1340mm and Minimum bottom size 504mm is reducing to top 153mm. The entire base is casted in gravity casting weight not less than 40Kgs. The bottom section of the pole 3000mmx140mmx3.0mm thick and top ribbed section of the pole 3000x114mm dia with base plated 300x300x12mm welded at the bottom of the pole. Pole is having a service window at bottom comprising four way connector and MCB for loop-in & loop-out arrangement. Pole is primer coating and polyurethane painted in dual shape antique paint with Humidity, IK protection scope of NABL final coat of PU clear. DFT not less than 90 micron. Suitable for mounting single drop down fixture. Design as approved by MVDA
72
50000
3600000
... More
Supply and laying of 16 sqmm 4 core aluminium conductor PVC insulated armoured served sheathed cable 1100 volts grade at a depth of 750 mm. below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. on surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc. PWD SOR 2014 S.I. No. 501-I (Havells/ polycab/ grandlay, KEI, Finolax Make).
2736
343
938448
... More
Supply & fixing of 7m GI Octagonal Pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1m length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect.
477
16500
7870500
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements